ReviewsWorking Temperature

XH-W3001 Digital LED Temperature Controller Module Digital Thermostat Switch with Waterproof Probe Programmable Heating Cooling Electronic Thermostat Range from -50℃ to 110℃ (12V 10A 120W) (2 Pieces)

2 Working modes: this digital LED temperature controller module has 2 working modes, heating mode (start temperature is lower than stop temperature) and cooling mode (start temperature is higher than stop temperature), range from -50°C to 110°C.
The high temperature control accuracy reaches 0.1℃.
Stable and reliable: the LED indicator light can display the current output status.
The digital display tube can display the measured temperature, and the temperature measurement and control accuracy is high.
Durable material: this XH-W3001 digital thermostat switch is made of ABS, one of the five major synthetic resins, which is non-toxic, strong impact resistance, heat and low temperature resistance.
Waterproof probe: equipped with a 1-meter NTC10K probe made of stainless steel, which is waterproof and not easy to rust, easy to use and can last for a long time.
Suitable for: the temperature controller module can be widely applied in the conditioning systems, incubators, equipment cases, temperature control protection and others.

WITH 3 MINI FANS: Equipped with 3 mini fans, which can draw heat from the case to maintain working temperature and keep it cool during heavy duty games..
AUTOMATIC AND MANUAL: The cooling fan has two working mode options, automatic and manual. You can manually set it to "Turbo" mode or "Auto" mode..
CHARGING: Use with most for PlayStation stand up charger stands. It gets DC 5V power from the for PS4 USB port. No additional power supply is required..
INTELLIGENT TEMPERATURE CONTROL: The fan turns on when the temperature exceeds 38 degrees Celsius, and turns off when it cools down. The cooler automatically manages the working temperature through a built in sensor..
EASY TO INSTALL: The cooling fan adopts snap on type for easy installation, quiet and fashionable design, which fits for PS4 closely. Simple tool free clip on installation..

209 EXTRA SLOW HARDENER is a low-viscosity epoxy curing agent. It is useful in a majority of hot-weather bonding situations, and when very long working time and cure time are needed. 209 Extra Slow Hardener produces a slow epoxy cure that develops physical properties gradually at room temperature. It yields a rigid, high-strength moisture-vapor resistant and functionally waterproof solid..
USE WITH WEST SYSTEM 105 RESIN for general coating and bonding applications in extremely warm and/or humid conditions, and for extended working time at room temperature. Forms a clear, amber-colored solid with good physical properties and moisture resistance for bonding and coating applications..
PROVIDES ABOUT TWICE the working time of 206 Slow Hardener. 209's pot life at 72°F (22°C) is 40 to 50 minutes. Pot life at 95°F (35°C) is 15 to 20 minutes. Cures to a solid state at 72°F (22°C) in 20 to 24 hours. Cure to a solid state at 95°F (35°C) in 6 to 8 hours. Reaches maximum strength at 72°F in 4 to 9 days Minimum recommended working temperature is 70°F (21°C)..
PAIR WITH WEST SYSTEM 105-B Epoxy Resin. Blend with with WEST SYSTEM 105 Epoxy Resin at a 3-parts resin to 1-part hardener ratio..
EASILY MODIFIED with WEST SYSTEM Fillers, Additives, and Pigments to ....

...Remote Control equipped with a 10 meter (33 ft) connector wire, which can control BLVEDEEP series crawlspace dehumidifier from a long distance..
Digital Control Panel: Simple to operate the setting, timely monitor the current working status of the dehumidifier, such as current dehumidify status, humidity level, room temperature, timer, defrost status, so all the information you can see on the control panel of the dehumidifier can be seen from this controller..
Long-distance Humidity controll: BLUEDEEP Remote Controller supports a larger range of settings, from 10% to 98%, the desired humidity can be set synchronously, as well as the timer(1-24h), which makes the dehumidifier installed at a high place or far away more convenient to set and supervise..
Temperature Protection: To ensure the dehumidifier working in a good condition, so it has built-in temperature protection, once it works at a high temperature(113℉)and low temperature(39℉), the controller will show "HH" and "LL" to remind you the dehumidifier stopped working..
Application: Our Remote Controller is suitable for BLUEDEEP series crawl space dehumidifiers.The package of the controller include 4 hooks, convenient to hang the dehumidifier on a high place. If you install the dehumidifier in a r....

Working temperature: -20 to +80 degrees Celsius..
overall size: 42x35mm / 1.65x1.38inch (DxH).
minimum sound pressure level: 80db at DC24V / 60CM.
working temperature: -20 to +80 degrees Celsius..
Continuous buzzer is very suitable for mechanical equipment, ovens, electrical cabinets, industrial applications, etc..

DC 12V 1/4" Quick connect Solenoid valve..
Working pressure:0.02-0.8Mpa. Its working temperature:32-158℉ (0-70℃)..
It will become hot because there are so many coils inside. It’s normal and safe phenomenon. The highest working temperature of this product reaches 60℃. If you want it works long hours, you should find a N/O normally open solenoid valve..

Four modes of working time: 10,20,30,40 seconds.
The optical fiber can be autoclaved to the high temperature and pressure..
Automatic shut down function(120s no any operation).
With adjustable working time, working time visual, working efficiency higher and intelligent zed charging stand..

Features maximum working temperature of around 60 degree celsius and with a minimum working temperature of -30 degree celsius.
Rapid push button lock system for head adjustment.