ReviewsWorm Gear Rack And Pinion

Permatex Bulb Grease (09141)

Lithium grease, precision lubrication, oxidation/corrosion protection, excellent wear and pressure resistance..
No particles: Provides maximum lubrication for relatively clean surfaces. Other particles available.
copper, aluminum, quartz, graphite, graphite/quartz and Teflon..
High dripping point grease, Temperature range.
-40 to 260 C. Greases improve performance and reliability of electrical contacts and mechanical components that require precise lubrication..
Ideal for applications in all industries.
Audio/Video, Computers, Heavy Equipment, Automotive, Communications, Marine, Electrical, Energy, Photography, Security, Medical, Avionics, etc..
USES - ELECTRICAL: Antennas, battery terminals, Buss bars, commutators, conductor rails, conductors, contactors, disconnects, drying & processing equipment, high amperage/high voltage, lifts, cranes, robotics, power tools, relays & switches, etc. USES - MECHANICAL: Bearings, doors/closures, chain/sprockets, hatch closures, O-rings/seals, linear motion systems, plugs, rack & pinion, screw devices, slide bushings, sliding parts, tracks/guides/rails, threaded closures, worm gears, etc..

Check Stock

220027041 : GEAR ASSEMBLY - STEERING FOR YALE

Operating Mode: Mechanical, for left hand drive.
Item Specifics: Rack and pinion steering gear for OPEL Corsa C 1.0/1.2/1.4/1.8/1.3D/1.7D 2001-, OPEL Combo 1.6/1.7DI/1.7DTI/1.7CDTI 2001-.
Fitment: Brand new power steering gear box rack for OPEL Corsa C 1.0/1.2/1.4/1.8/1.3D/1.7D 2001-, OPEL Combo 1.6/1.7DI/1.7DTI/1.7CDTI 2001-.
Quality Assurance: 1 year warranty. Please do not hesitate to contact if any questions about using our product appears..
ATG is experienced professional seller specializing in power steering parts trade and repair since 1991. Our company has been audited by G-CERTI and has implemented ISO 9001:2015 certificate..

Check Stock

Power Steering Gear R21031RB Remanufactured by ATG Certified - 1 Year Warranty

Operating Mode: Hydraulic, for left hand drive vehicles.
Item Specifics: Rack and pinion steering gear for CHEVROLET Spark 1998-2005, DAEWOO Matiz 1998-.
Fitment: Brand new power steering gear box rack for CHEVROLET Spark 1998-2005, DAEWOO Matiz 1998-.
Quality Assurance: 1 year warranty. Please do not hesitate to contact if any questions about using our product appears..
ATG is experienced professional seller specializing in power steering parts trade and repair since 1991. Our company has been audited by G-CERTI and has implemented ISO 9001:2015 certificate..

Check Stock

Power Steering Gear R21851NW by ATG Certified - 1 Year Warranty

Operating Mode: Hydraulic, for left hand drive.
Item Specifics: Rack and pinion steering gear for TOYOTA Land Cruiser 100 1998-2002, LEXUS LX470 II 1998-2002.
Fitment: Brand new power steering gear box rack for TOYOTA Land Cruiser 100 1998-2002, LEXUS LX470 II 1998-2002.
Quality Assurance: 1 year warranty. Please do not hesitate to contact if any questions about using our product appears..
ATG is experienced professional seller specializing in power steering parts trade and repair since 1991. Our company has been audited by G-CERTI and has implemented ISO 9001:2015 certificate..

Check Stock

Caltric Steering Sector & Pinion Gear W/Bushings Compatible With John Deere 155C 190C

【PREMIUM QUALITY】Steering Sector Pinion Gear Rebuild Kit is made of quality steel and has nice anti-rust coated finish, which enhance the durability and superior reliability.
【FITMENT】Steering sector gear and pinion gear replacement for John Deere 107H 107S 92H D105 D110 D125 D130 D140 & More. Please verify your model is listed in the fitment section.
【REPLACES#】The package includes 1 x set sector plate and 1 x pinion gear as pictures show. The OEM Number: UC13515 GX26057 GX26220. Please note that the steering sector gear plate with 26 teeth!.
【HIGH RELIABILITY】Taking into account the quality of the product, this steering pinion sector gear rebuild kit has undergone a rigorous testing to ensure proper operating parameters to factory specification.
【24-MONTH WARRANTY】Exquisite craft, strict quality control and excellent after-sales service that is why our teering sector gear and pinion kit worth your purchase.

Check Stock

Worm Gear Set, 20: 1 Bronze Worm Gear Wheel and Metal Shaft, High Torsion Worm Gear Replace for 4:1, Industrial Robot Parts for DIY Project

INDUSTRIAL ROBOT SPARE PARTS: The worm drive has a simple, compact, small size and light weight. Simple structure, easy installation and disassembly..
WORM GEAR: If you need more torque or slower output speed, it can be used to replace the 4:1 worm gear that comes standard with the worm gear box. Again, this unit reduces backdrive to almost zero..
NOTE: The worm gear is mounted on a 4.7mm D-shaft diameter. The worm is mounted on a 6mm or 4.7mm diameter D-shaft..
HIGH QUALITY MATERIAL: The worm is made of metal, and the worm wheel is made of bronze, which has impact resistance, high temperature resistance, corrosion resistance and long service life..
PARAMETERS: The gear ratio is 20:1, which is suitable for building industrial robots with various functional shapes..

Check Stock

【Element Airsoft Official Store】Motor Gear Pinion Removal Install Tool RC Motor Pinion Gear Tool Motor Pinion Gear Remover Ffor AEG Motors Metal ARMY FORCE-TL002 BK EX121

Element airsoft 's name and element airsoft's quality. The best. Motor gear (pinion gear) tool ● Part number: EX 121. airsoft pinion gear puller.
With this tool, it is possible to attach and detach without burden.Mounting and dismounting are possible.The pinion remover is an essential tool for changing the pinion gear of the electric gun motor..
The motor pinion gear is usually press-fitted and installed, so it is almost impossible to detach it with a tool other than a dedicated tool..
The included small parts are grounded before and after the motor when the pinion gear is press-fitted..
* Please note that compatibility with D-type motors will be reduced！！！！It fits for O-type motors！！！！.

Check Stock

HQPASFY Steering Sector Pinion Gear Rebuild Kit Fit John Deere D Series Lawn Tractors Replaces# UC13515 GX26057 GX26220

【PREMIUM QUALITY】Steering Sector Pinion Gear Rebuild Kit is made of quality steel and has nice anti-rust coated finish, which enhance the durability and superior reliability.
【FITMENT】Steering sector gear and pinion gear replacement for John Deere D100 D105 D110 D120 D125 D130 D140 D150 D160 D170. Please verify your model is listed in the fitment section.
【ATTENTION】The package includes 1 x set sector plate, pinion gear, nut and bolt, 1 x set metal bushing, 2 x plastic bushing as pictures show. The L and D mowers do NOT use the same steering sector plate.
【REPLACES#】OEM D Series Sector Plate Number: GX21924BLE. OEM Pinion Gear Number: GX20053. OEM Metal Bushing Number: GX20054. OEM Plastic Bushing Number: GX21994. Please note that the D series gears with 19 teeth!.
【24-MONTH WARRANTY】Exquisite craft, strict quality control and excellent after-sales service that is why our teering sector gear and pinion kit worth your purchase.

Check Stock

HQPASFY Steering Sector Pinion Gear Rebuild Kit Replacement for John Deere LA Series Lawn Tractors Replaces# GX21924BLE, GX20053, GX20054, GX21994

【PREMIUM QUALITY】Steering Sector Pinion Gear Rebuild Kit is made of quality steel and has nice anti-rust coated finish, which enhance the durability and superior reliability.
【FITMENT】Steering sector gear and pinion gear replacement for John Deere LA100 LA105 LA120 LA130 LA135 LA140 LA145 LA150 LA165 LA175 & More. Please verify your model is listed in the fitment section.
【ATTENTION】The package includes 1 x set sector plate, pinion gear, nut and bolt, 1 x set metal bushing, 2 x plastic bushing as pictures show. The L and LA mowers do NOT use the same steering sector plate.
【REPLACES#】OEM LA Series Sector Plate Number: GX21924BLE. OEM Pinion Gear Number: GX20053. OEM Metal Bushing Number: GX20054. OEM Plastic Bushing Number: GX21994. Please note that the LA series gears with 19 teeth!.
【24-MONTH WARRANTY】Exquisite craft, strict quality control and excellent after-sales service that is why our teering sector gear and pinion kit worth your purchase.

Check Stock

uxcell® 90 Degree Shaft Angle Replacement Part Spiral Bevel Helical Gear Set 3pcs

Ring Gear Size: 44 x 13mm/1.73'' x 0.51''(Max.D*T).
Pinion Gear Size: 19 x 12.5mm/0.75'' x 0.49''(Max.D*T).

Check Stock

Mod 1 Pinion Gear 5mm Set Hardened 16T 17T 18T 19T 4pcs Mod1 M1 Pitch Gears RC Upgrade Part with Hex Key

【1/8 Universal Upgrade】 The 1/8 RC car pinion gear set have a 5mm bore is suited for 5mm shaft, is an ideal universal upgrade pinion gear for....
【Quality Steel】 The 1/8 RC car pinion gear set are made of quality steel, durable and reusable, enjoy your happy RC racing time..
【Different Option】 You will like the option of being able to change your gear ratio for different track conditions..
【 Package Include】16T 17T 18T 19T M1 pinion gear, screw set and one hex key..

Check Stock