ReviewsWorm Gear Screw Lift

ISPINNER 2pcs 6 Inch Key-Type 304 Stainless Steel Worm Gear Hose Clamps, Adjustable Size Range 130-152mm Clamps for Dryer Vent, Dust Collector and Automotive

  • 【HIGH QUALITY】Made of high quality 304 stainless steel with high performance of corrosion resistance and acid resistance, they are strong and durable, when installing on the pipe, you will no longer worry about them rusting and breaking..
  • 【FLEXIBLE SIZE】6 Inch Key-type Worm Gear Hose clamps are flexible and workable with a rather wide adjustable size range about 130-152mm. Bandwidth is 12.7mm..
  • 【EASY TO TURN KEY】These clamps have a easy to turn key, which is designed to make it easier to secure and un-secure on the hose. No screw drivers or socket wrench is needed any more! Just simply turn the key clockwise to tighen and counter clockwise to loosen..
  • 【PACKAGE】Total 2pcs 6 Inch Key-type Worm Gear Hose clamps..
  • 【WIDE APPLICATION】 These unique clamps are typically used in securing duct work, dryer vents, dust collection hoses, piping, large cable, pvc tubing and more. Ideal for use in automotive, industrial, mechanical, agriculture, boat/marine, shield, recreational vehicles, household and more. Works for both indoor or outdoor use..
Check Stock

10 Pack Breeze TB800 Standard T-Bolt Clamp Effective Diameter Range 8 - 8.31 203.2mm - 211.1mm

  • T-bolt hose clamp with stainless band and plated steel screw - can be installed at higher torque than worm gear clamps.
Check Stock

10 Pack Breeze TB825 Standard T-Bolt Clamp Effective Diameter Range 8.25 - 8.56 209.6mm - 217.5mm

  • T-bolt hose clamp with stainless band and plated steel screw - can be installed at higher torque than worm gear clamps.
Check Stock

Homagic Hose Clamps 39 FT Adjustable Stainless Steel Large Hose Clamp with 13 Fasteners Duct Clamps for Automotive Pipes Cables Tubes Heating Cooling

  • ... of the worm drive pipe clamp enables a large adjustable range, better sealing, and can solve many problems such as liquid and gas leakage.
  • Simpler: Installing metal strapping in accordance with the correct instructions will get twice the result with half the effort. Use a screwdriver to loosen or tighten the screw of the hose clamp to adjust the size, and fix the hose strap tightly on the pipe.
Check Stock

Magisale Garage Door Parts Bracket Adjustable Reinforcement Bracket, Carbon Steel Zinc Plated

  • VIRTIONZ replacement Gear & Sprocket Kit for LiftMaster Sears Craftsman 41C4220A, 41A2817 Garage Door.
  • Specs - Large Gear: 2 3/4" x 1/2" with 1/2" bore. Worm Gear: 1 1/8" Outside Diameter with 1 1/4" wide teeth..
  • Includes - (1) Gear & Sprocket Kit with Worm Gear, Grease, Motor Shaft Bearings, Sprocket Bearings & Hardware.
  • If your garage door opener is a 1/2 HP or 1/3 HP chain drive model with a production date of 1984 to present, this kit will be compatible.
  • Do NOT use for garage openers with dual sprockets on the output shaft.
Check Stock

Plastic Gears Set Pulley Belt Worm Kits Crown Gear Set Robot Motor Toy DIY Parts for Model Amateur(64 new gear packs)

  • Worm and worm gear Coincide distance from the center distance is 8 mm.
  • 1pairs x 0.5 Modulus Small Reduction Ratio of 1:10 Motor Output Copper Worm Wheel Gear For DIY.
Check Stock

LiftMaster Gear and Sprocket Assembly 41A5658 - G2595

  • The ROP Shop replacement Gear & Sprocket Kit for LiftMaster 1245LK, 1250, 1255, 1255R, 1260 Garage Doors.
  • Specs - Large Gear: 2 3/4" x 1/2" with 1/2" bore. Worm Gear: 1 1/8" Outside Diameter with 1 1/4" wide teeth. Refer to images 2 & 3 for more information.
  • Includes - (1) Gear & Sprocket Kit with Worm Gear, Grease, Motor Shaft Bearings, Sprocket Bearings & Hardware.
  • Compatible with Residential Chamberlain, Liftmaster, Sears Craftsman, Master Mechanic and Garage Master, 1/2, 1/3, 3/4 HP chain drive models manufactured 1984 to present.
  • Do NOT use for garage openers with dual sprockets on the output shaft.
  • Not compatible with Sears openers made before 1984 - body color of powerhead unit: brown, green, or yellow.
Check Stock

IEUYO 30PCS Stainless Steel Worm Gear Clamp Assortment Kit, Worm Gearn Hose Clamp, Screw Band Hose Clamps, Tube Clamp, Pipe Clamp, Cable Clamp, Adjustable,8-29mm, 5 Sizes

  • 1.304 stainless steel band,housing and screw, can resistant to corrosion..
  • 2. Band width of 8mm small hoses better fits than larger widths.
  • 3. Different Size Fit Diameter Range 8-29mm.
  • 4. Worm Gear (screw/band)Hose Clamp, Easy To install.
  • 5. Widely use in Industry, Automotive , Electrical , HVAC ,Home improvement field, etc..
Check Stock

CNBTR 0.5 Modulus Brass Metal Speed Reducer with 60 T Wheel 5mm Bore Gear Shaft

  • [Product Type] Size 1: Brass Gear Wheel: 0.5 Modulus, 60T, Hole Diameter: 6mm/0.24inch, Gear: 31x12mm/1.22x0.47inch (DxH). Size 2: Brass Gear Shaft: 0.5 Modulus, Hole Diameter: 5mm/0.2inch, Overall Length: 20mm/0.79inch..
  • [Material] Made of brass material, not easy to wear, durable and lasting performance. This gear wheel & shaft are the excellent industrial replacement accessory..
  • [Function] The transmission structure of gear shaft is simple, compact, small volume and light weight. Easy to install and use..
  • [Package] The item contains one 0.5 modulus brass worm gear shaft and one 60T brass worm gear wheel..
  • If you have any question about the product, feel free to contact the CNBTR Service and we will try our best to give you a satisfactory answer..
Check Stock

Ideal 50 SeriesStainless Steel Worm Gear Hose Clamp 1-1/2 Clamp ID 2-1/2 Clamp OD 9/16 Band Width Pack Of 10

  • Stainless steel band for resistance to scaling and corrosion.
  • Zinc-plated carbon steel screw resists rust.
  • Worm gear mechanism for precise band adjustment.
  • Band width of 9/16” provides greater sealing area than smaller width band.
Check Stock

Garage Door Replacement Parts Gear for Linear Moore-O-Matic XX150, X150X-S

  • Genie Garage Opener Drive Worm Gear - Part # 27090A Genie garage door opener is a replacement drive worm gear..
Check Stock