ReviewsWort Kettle

Podoy 12'' Bazooka Screen Stainless Steel Kettle Tube Mash Tun Mesh Filter Boil Screen Brew for Home Brew (12 inch)

〖MATERIAL〗：The whole of kettle bazooka screen is made of food grade durable 304 stainless steel..
〖VARIOUS USAGE〗：Our bazooka screen can attach to the 1/2 BSP thread fitting. Perfect for all-grain brewing or straining out leaf hops after your boil , replace false bottom to separate wort from the grain effectively ,also use this as a screen in cooler （don't quite fit your 10 gallon cooler）mash tun.The filter is fixed on the nipple via the specific hose clamp.Our Kettle Tube Screen Can Filter Out Leaf Hops,Not Pellet Hops.
〖HIGH QUALITY〗：12 inch Bazooka screen features a chemical resistance, rust and corrosion resistance.So our bazooka screen can use for a long time..
〖EASY TO CLEAN〗：After using, you can use the brewing paddle or spoon to gently scrape along the screen to rid off the trub on screen, or running water through the inside, then let it dry.When dried you just shake off the excess grain sediment..
〖OUR GUARANTEE〗：For any reason you're not completely satisfied, you can ask for a replacement or full refund..

Check Stock

BACOENG Stainless Steel 115 Volt Inline Home Brewing System Beer Pump, 55” Cord WITH Plug, Inlet 1/2” x Outlet 1/2” MPT

SPECIFICATIONS: 1/2inch MPT Inlet&Outlet.
FDA FOOD COMPLIANT - Stainless steel is used in professional setups because it is a durable, food-grade metal that can withstand caustic chemicals and can be effectively sanitized..
EASY TO USE: Prime by running liquid through pump prior to turning on.
The liquid travels from the bottom of the valve into the pump, and once device is powered on (plugged in to outlet), the propeller circulates liquid for maximum flow.
Use to dispense beer, treat water, transfer hot water from your kettle to a mash tun, or recirculate mash wort and sparge and transfer to a brew kettle.
MATERIAL PERFORMANCE: Pump extraction medium temperature changes should be controlled within 100℃, high temperature does not exceed 120℃. Shaft bearing adopt special ceramics material which make it characterize strong resistance for abrasion and corrosion..
MAGNETIC: Fully sealed pump motor with connecting magnetic shaft and magnetic propeller.
Magnetically coupled for enhanced operation.

Check Stock

Ferroday 20 Plate Wort Chiller Stainless Steel Brazed Plate Heat Exchanger 1/2 NPT Thread Plate Chiller (7.5\ x 1.97\)

[Durable Material]: This wort chiller is made of 304 stainless steel plates with 99.9% copper brazed. Using this plate chiller can reduce oxidation in your homebrew heat exchange..
[Quickly Chilling Beer Wort]: This compact heat exchanger is designed for chilling your beer/ wort/water. Compared with the immersion chiller, our heat exchanger has 20 brazed plates and cools wort within minutes rather than several hours..
[Easy To Clean Out]: The heat exchanger can't be dissembled to clean. So firstly you can run 5 gallons of cleaning solution through this chiller. Then running some clear water through the wort chiller. After done, dry the chiller before storage..
[Can Work With Water Pump]: The wort-in port of the chiller connect your mash tun, the wort-out port connect your fermenter, the wort can be transferred by a wort pump. One side of the water hose connects to your water tap and the other side connects to the water-in port of our plate chiller. Using another hose to connect the water-out port of the chiller to remove the warm water..
[Multifunctional Usage]: Using for cooling wort/beer/water. It's perfect to use in the lab, for beer brewing, or for any application that requires the exchange of heat between two fluids. Please install a filter for the ....

Check Stock

Happybuy MP-15RM beer brewing pump Plastic Head with 0.5 inch MPT Magnetic home brew pump 110 Volt Inline Home Brewing System Beer Pump

【EASY OPERATION】- Prime by running liquid through pump prior to turning on.
Use to dispense beer, treat water, transfer hot water from your kettle to a mash tun, or recirculate mash wort and sparge and transfer to a brew kettle.
The liquid travels from the bottom of the valve into the pump, and once device is powered on (plugged in to outlet), the propeller circulates liquid for maximum flow.
【OPERATION QUIET】 – Advanced magnetic drive technology with static-impeller, without any leakage ever.Brew pumps very quiet..
【USED WIDELY】 -This homebrew pump is an optimum liquid transport pump with high output volume and quiet operation for industrial and home equipment..
With 19 LPM (5 GPM) max flow rate, our beer pump can lift max 3.4 m (10 ft)..
【SPECIFICATIONS】-1/2inch MPT Inlet&Outlet.
【MATERIAL】- The food grade pump MP-15RM features with food grade high temp plastic head 1/2 inch thread to transfer hot and cold liquids, is the most efficient way to move piping hot and heavy loads of liquid.

Check Stock

FERRODAY Wort Chiller 30 Plate 1/2 NPT Plate Chiller Stainless Steel Brazed Plate Heat Exchanger 1/2 Thread Plate Chiller - 7.3' x 2.8'

[Durable Material]: This wort chiller is made of 304 stainless steel plates with 99.9% copper brazed. Using this plate chiller can reduce oxidation in your homebrew heat exchange..
[Quickly Chilling Beer Wort]: This compact heat exchanger is designed for chilling your beer/ wort/water. Compared with the immersion chiller, our heat exchanger has 30 brazed plates and cools wort within minutes rather than several hours..
[Easy To Clean Out]: The heat exchanger can't be dissembled to clean. So firstly you can run 5 gallons of cleaning solution through this chiller. Then running some clear water through the wort chiller. After done, dry the chiller before storage..
[Can Work With Water Pump]: The wort-in port of the chiller connect your mash tun, the wort-out port connect your fermenter, the wort can be transferred by a wort pump. One side of the water hose connects to your water tap and the other side connects to the water-in port of our plate chiller. Using another hose to connect the water-out port of the chiller to remove the warm water..
[Multifunctional Usage]: Using for cooling wort/beer/water. It's perfect to use in the lab, for beer brewing, or for any application that requires the exchange of heat between two fluids. Please install a filter for the ....

Check Stock

Northern Brewer - Insulated Cooler All Grain Beer Brewing Kits Starter Kit w/ 12 Gallon Mash Tun

The completely redesigned mash/lauter tun features thick insulation, a large 12+ gallon capacity and the first ever integrated thermometer..
Featuring all stainless steel fittings including our proprietary bulkhead and Titan False Bottom, this system is designed to last..
Everything you need to mash, sparge and collect wort is included so no additional purchases are necessary..
Simply remove the valves and thermometer, and the hot liquor tank will nest perfectly inside the mash tun for the smallest possible footprint for....
NOTE: A full boil is required for All-Grain brewing, so a boil kettle with an 8 to 10 gallon capacity is highly recommended..

Check Stock

YUEWO 26 ft Copper Immersion Wort Chiller Coil Homebrew for Beer Brewing with Vinyl Tubing Garden Hose Fitting

High Efficient & Easy to Clean - This immersion wort chiller used for cooling beer or malt. The beer wort chiller transfers heat more efficiently and is easy to clean..
High performance & Quick Cooling - The home brew wort cooler cools the wort down to a temperature where you can add beer yeast, which is part of what turns the wort into delicious beer. It has reliable performance and quick wort cooling process. Our wort chillers are up to the task whether it's winter or summer..
Package includes a garden hose connection, so you can brew outside, you can also connects to a laundry sink faucet as your chilling water source..
Dimension - 3.94inch x 7.87inch x 13.78inch/10cm x 20cm x 25cm(coil diameter x coil height x inlet height) copper immersion wort chiller, 2 pcs 1.5m/4.92feet vinyl tubing..
Package List - Package includes home brew wort chiller, 2 pcs vinyl tubing, one garden hose fitting and 2 hose clamps..

Check Stock

Northern Brewer - Premium Craft Brewery in a Box Beer Making Starter Kit (Fresh Squished)

Our best selling starter kit with some additional upgrades, this kit includes everything you need, step by step instructions plus some additional gear to make brewing even easier..
Upgrades include a heavy duty Megapot 1.2 kettle with ball valve plus an immersion wort chiller.
No need to bother with siphons. The Big Mouth Bubbler and Translucent Bucket are drilled with spigots to make transferring and bottling a breeze!.
Fresh Squished IPA Recipe Kit Included! Makes 5 Gallons of Beer.
Capper and Bottle Caps included but you will need to provide roughly 50 - 12 oz bottles that accept pry off caps on bottling day. Better yet, check out our easy to use kegging systems to simplify the process!.

Check Stock

Dbgogo Counterflow Wort Chiller, 32.8’ Homebrew Stainless Steel Heat Exchanger Hot Liquid Accelerated Cooler for Brewing Kettle Mash Tun

High Efficient & Easy to Clean - This immersion wort chiller used for cooling beer or malt. The beer wort chiller transfers heat more efficiently and is easy to clean..
High performance & Quick Cooling - The home brew wort cooler cools the wort down to a temperature where you can add beer yeast, which is part of what turns the wort into delicious beer. It has reliable performance and quick wort cooling process. Our wort chillers are up to the task whether it's winter or summer..
Package includes a garden hose connection, so you can brew outside, you can also connects to a laundry sink faucet as your chilling water source..
Dimension - 3.94inch x 7.87inch x 13.78inch/10cm x 20cm x 25cm(coil diameter x coil height x inlet height) copper immersion wort chiller, 2 pcs 1.5m/4.92feet vinyl tubing..
Package List - Package includes home brew wort chiller, 2 pcs vinyl tubing, one garden hose fitting and 2 hose clamps..

Check Stock

Northern Brewer - Premium Craft Brewery in a Box Beer Making Starter Kit (Caribou Slobber)

Our best selling starter kit with some additional upgrades, this kit includes everything you need, step by step instructions plus some additional gear to make brewing even easier..
Upgrades include a heavy duty Megapot 1.2 kettle with ball valve plus an immersion wort chiller.
No need to bother with siphons. The Big Mouth Bubbler and Translucent Bucket are drilled with spigots to make transferring and bottling a breeze!.
Caribou Slobber Brown Ale recipe kit included! Makes 5 gallons of finished beer.
Capper and Bottle Caps included but you will need to provide roughly 50 – 12 oz bottles that accept pry off caps on bottling day. Better yet, check out our easy to use kegging systems to simplify the process!.

Check Stock

Happybuy Beer Brewing Pump Stainless Steel Head with 1/2 Inch Mpt Magnetic Home Brew Pump 110 Volt Inline Home Brewing System Beer Pump

Specifications: 1/2inch MPT Inlet&Outlet.
With 19 LPM (5 GPM) max flow rate, our beer pump can lift max 3.4 m (10 ft)..
Safe Transfer Liquids: Tested for safety and performance standards, it can transfer hot and cold liquids quickly and safely. Comply with FDA food standards, can be used in prpfessional occasions. Food grade pump can withstand caustic chemicals and can be effectively sanitized..
Quiet and Efficient: The separation of the pump main shaft and the impeller achieves the effect of damping and preventing vibration, and reduces the impact of the motor vibration on the pump. With excellent smooth running and efficient quiet cycle..
Easy Operation: Prime by running liquid through pump prior to turning on.
The liquid travels from the bottom of the valve into the pump, and once device is powered on (plugged in to outlet), the propeller circulates liquid for maximum flow.
Use to dispense beer, treat water, transfer hot water from your kettle to a mash tun, or recirculate mash wort and sparge and transfer to a brew kettle.
Used Widely: This homebrew beer pump is an optimum liquid transport pump with high output volume and quiet operation for industrial and home equipment..

Check Stock