ReviewsWpc Conical Twin screw Extrusion

PARRIS CLASSIC QUALITY TOYS EST. 1936 Paris V3 165mm 50° Longboard Skateboard Trucks (Jet Black, Set of 2)

  • SIZED RIGHT — Paris V3 165mm trucks are perfect for medium-width longboards, providing a better fit and feel for the ride that’s just your size..
  • NEXT LEVEL MANUFACTURING — Produced using Paris’ new, proprietary alloy-forming process, Paris V3 trucks utilize techniques derived from casting, extrusion, and forging..
  • CARVING PERFECTION — The baseplate’s 50° angle and the hanger’s open bushing seat combine to offer a fluid transition between deep, diving turns..
  • BUILT TO LAST — Down to a molecular level, the Paris V3 trucks are stronger than any other cast longboard truck on the market. Broadened hanger shoulders and reinforced baseplate support beam reduce stress and increase overall strength..
  • ULTIMATE RESPONSE — For the best response and rebound, the Paris V3 trucks come with a redesigned top conical bushing and hand-poured urethane pivot cups for an ultra-smooth turn..
Check Stock

Dayton Audio DATS V3 Computer Based Speaker & Audio Component Test System

  • Robust 60 WPC output at 4 ohms, 40 WPC output at 8 ohms.
  • Independent and bus inputs enable unparalleled flexibility.
  • Bridgeable channel outputs provide additional power when needed.
  • Independent channel gain controls allow the output of each speaker to be perfectly matched.
  • Multi-stage protection circuitry for reliability and easy troubleshooting of audio system.
Check Stock

1 x 1 1010 Series Aluminum Extrusion Profiles Frame Hinge Install Kit Connector Set 4pcs Zinc Alloy Hinge with T-Nuts Hex Screw Bolt for 1 Inch x 1 Inch Extrusion Profiles Rail

  • 1010 10 series aluminum profile T-slot connector set widely used for building industrial aluminum frame structures, 3D printers, CNC Routers, CNC....
  • Package content: 4pcs 1 inch x 1 inches Aluminum Extrusion Profiles Frame Hinge, 16pcs galvanized T-slot nuts, 16pcs stainless steel hex socket cap....
  • Zinc alloy hinge used to connect pieces of 1" aluminum extrusion at a 90 degree angle suitable for most of 10 series aluminum profile extrusion.
  • Stainless steel hex socket button head bolts screws nuts surface chrome finish anti-corrosion, rustless, non-pollution.
  • Used to connect the connection between profiles and profiles or boards.
Check Stock

Haldis 3D Extruder DDB Universal Nano Gear Dual Drive 3D Printer Extruder for Ender 3 Pro Ender 5 Pro CR10S Pro Mega S Prusa I3 Other DIY 3D Printer Kits DLC Right

  • 1.【Transparent Design】: Transparent and cool design, double gear extruder, when working, you can watch the printing filament go through to see how....
  • 2.【Dual Gear Extrusion】: Two stainless steel wheels grab the filament from both sides, high extrusion force, ensure smooth feeding and provide....
  • 3.【Adjustable Pressure Spring】: Easily adjust the clamping force of the filament, improved adjustment thumb screw, more comfortable adjustment and....
  • 4.【High Quality Material】: Transparent hard plastic shell and high quality metal extrusion wheel parts, the transparent material looks very....
  • 5.【WIDE COMPATIBILITY】: Compatible with most DIY 3D printers, such as Creality CR10, MK8 V6 CR10 Ender 3 series, Wanhao D9, Anet A8 E10, Geeetech....
Check Stock

Dayton Audio DTA-2.1BT2 100W 2.1 Class D Bluetooth Amplifier with Sub Frequency Adjustment

  • Robust 60 WPC output at 4 ohms, 40 WPC output at 8 ohms.
  • Independent and bus inputs enable unparalleled flexibility.
  • Bridgeable channel outputs provide additional power when needed.
  • Independent channel gain controls allow the output of each speaker to be perfectly matched.
  • Multi-stage protection circuitry for reliability and easy troubleshooting of audio system.
Check Stock

Klein Tools 53729 Drywall Anchor Kit for Use in Drywall or Masonry, 100 Anchors

  • Kit contains: 100 #2 Phillips, #10 x 1-Inch Screws, and 100 conical anchors.
  • 1/4-Inch masonry drill bit also included.
  • Light-weight anchor holds screw securely in place.
Check Stock

KOOTANS 20-Pack 90 Degree Angle Brackets Interior Joint Corner Bracket for European Standard 2020 Series T Slot 6mm Aluminum Extrusion Profile with Screws and Wrench

  • Package include: 20pcs L joint and 40pcs screws and wrench.
  • 2020 Series Aluminum Profile Connector widely used for building industrial aluminum frame structures, 3D printers, CNC Routers, CNC laser cutters,....
  • Fit European standard 2020 series Aluminum extrusion.
  • Rigid connection, used to connect pieces of 20mm aluminum extrusion at a 90 degree angle.
Check Stock

Glarks 216Pcs 3030 Series Aluminum Profile Connector Set Include 20Pcs 3030 Corner Bracket, 40Pcs M6 T Nuts, 4Pcs 3-Way End Corner Bracket Connector, M5 x 20 Button Head Screw Bolts and Flat Washers

  • ...de of aluminum, the socket cap screws and nuts washers are made of high quality 304 stainless steel, anti-rust and corrosion resistance, can be applied for a long time, you won't worried broken after installed..
  • ♛【Easy to Use】: Our angle bracket is mainly uesd to reinforce right-angle corner joints of aluminum extrusion profiles, easy to use no tool needed. Insert the two ends of the bracket into the groove of the profile, put on the flat washer and lock washer, and tighten the screw to fix the two profiles..
  • ♛【3030 Series】: Our corner bracket set is fit for 3030 series aluninum extrusion, can be used DIY 3D printers, CNC routers, CNC laser cutters, robotics projects and so on..
  • ♛【Wide Application】: Our complete corner bracket kit are matched well with each other, can be widely used in home, office and factory area, like the connection of cabinets, tables, chairs, stands, shelves and other furniture, to make it more stable..
Check Stock

Haldis 3D Dual Drive Gear Extruder for 3D Printer MK8 V6 CR10 1.75mm TPU/TPE Flexible Filament Without Motor (DDB Left)

  • 1.【Transparent Design】: Transparent and cool design, double gear extruder, when working, you can watch the printing filament go through to see how it works. The transparent case is very practical and looks beautiful..
  • 2.【Dual Gear Extrusion】: Two stainless steel wheels grab the filament from both sides, high extrusion force, ensure smooth feeding and provide fast retraction, after a lot of trial and error improvements, we successfully improved the gear bite problem, improved The durability and reliability of the gears reduce the consumption of our gears and extend their service life..
  • 3.【Adjustable Pressure Spring】: Easily adjust the clamping force of the filament, improved adjustment thumb screw, more comfortable adjustment and more convenient to use..
  • 4.【High Quality Material】: Transparent hard plastic shell and high quality metal extrusion wheel parts, the transparent material looks very beautiful and beautiful. Lightweight: only 70 grams. It reduces the stress on the printer and is extremely easy to assemble..
  • 5.【Widely Compatible】: Compatible with most DIY ....
Check Stock

Ground Rod Grounding Electrode Iron Made Galvanized Earthing Rod Ground Rod for Lightning Protection Great for Electric Fences Antennas Satellite Dishes Other Grounding and Bonding Needs.

  • [Conical grounding pin]-The bottom is designed with a conical shape and is tightly integrated with the soil, and the area of dissipating current is....
  • [Easy to Install]-Strong enough to pound into the ground and with Pre-installed Screw Bolt Wire Clamp for seamless integration with your wires.....
  • [Safety]-This solid, sturdy steel reinforced grounding rod provides lightning dissipation for a safe grounding solution.
Check Stock

Kesell 10ml High-Speed Centrifuge Tube Conical Bottom Orange Screw Cap with Clear Graduation and Writing Area, Pack of 20

  • 10ml Conical bottom centrifuge tube with high purity PP Material, with clear graduated and screw cover, Markable blank area..
  • The set includes 20pcs centrifuge tubes. They're simple to fill and the lids fit tight, no leaks..
  • Smooth products, good transparency, accurate measurement scale, the lid elastic appropriate to high-speed centrifugal..
  • Polypropylene centrifuge tubes have the advantage of being transparent or translucent. They have a low hardness and can be removed by puncture..
  • 10ml Conical Centrifuge Tube are widely used in laboratories for multiple purposes, from storage of samples to high speed centrifugation..
Check Stock