ReviewsWrench Sets

Airtag Bike Mount Bike Tracker Anti Theft – Bicycle GPS Tracker Anti Theft – Compatible with Apple Air Tag Locator Tag – Waterproof Holder – Security Screws 2 Sets – Rust Proof

  • AirTag Compatible - This WATERPROOF Airtag Bike Mount will attach to ANY bicycle out there from your standard mountain bike, road bike, ebike, and more! ONLY for iOS devices..
  • Security Screws - Each purchase includes TWO sets of stainless steel rust proof screw sets. One set in 20mm and one set in 25mm. This way you can use it both with and without bottle cages!.
  • Anti Theft Wrench - Stainless steel anti theft wrench is included! This makes it near impossible to take off the impact resist case unless you have this special wrench..
  • Waterproof - Completely seal your airtag from the elements and prying eyes, our matte black finish is completely inconspicuous to the eyes, no one will even know it's attached to your bike but you!.
  • High Quality Finish - This is not your cheap 3D printed case, this was custom molded with high density impact resist plastic. This case will outlast your bike!.
Check Stock

Rugged Tools Wrench Roll Up Pouch - Wrench Organizer & Tool Holder with SAE & Metric Labels

  • 24 Wrench Slots: There are 24 pockets of graduated widths from 5 cm - 2.8 cm pockets to organize your entire metric and SAE wrench set.
  • POCKET Labels: Tool Roll Up Bag includes stickers with pre-printed SAE sizes 1/4 to 1" in red and metric sizes 6 to 19mm in blue + 8 blank labels..
  • 4 Utility Pockets: Each of the four pockets of this wrench holder are 45 cm wide to accommodate hex key sets, bits, sockets, etc..
  • 3 Metal Grommets: Use to hang wrench pouch on peg boards in your workshop or jobsite. The security flap on the roll up tool bag holds your tools in....
  • HEAVY DUTY CONSTRUCTION KEEPS YOUR TOOLS SECURE - Tool Roll Up Pouch is constructed of 600D polyester with grease resistant PVC lining and quick-open....
Check Stock

Rugged Tools Wrench Roll Up Pouch - Wrench Organizer & Tool Holder With SAE & Metric Labels

  • 24 Wrench Slots: There are 24 pockets of graduated widths from 5 cm - 2.8 cm pockets to organize your entire metric and SAE wrench set.
  • POCKET Labels: Tool Roll Up Bag includes stickers with pre-printed SAE sizes 1/4 to 1" in red and metric sizes 6 to 19mm in blue + 8 blank labels..
  • 4 Utility Pockets: Each of the four pockets of this wrench holder are 45 cm wide to accommodate hex key sets, bits, sockets, etc..
  • 3 Metal Grommets: Use to hang wrench pouch on peg boards in your workshop or jobsite. The security flap on the roll up tool bag holds your tools in....
  • HEAVY DUTY CONSTRUCTION KEEPS YOUR TOOLS SECURE - Tool Roll Up Pouch is constructed of 600D polyester with grease resistant PVC lining and quick-open....
Check Stock

Watch Case Opener Wrench 13 L-G Tools & 2 Books

  • The original patented waterproof case wrench.
  • Four sets of pins, twelve total (round, square, flat and curved).
  • Opens common screwback case backs types: hole, multi-notch, polygon and knurled.
Check Stock

Husky 3-Piece Pliers and Wrench Set

  • Groove joint pliers smoothly adjust between jaw positions.
  • Slip joint pliers feature dual sized jaw design for multiple applications.
  • Patented 8 in. double speed adjustable wrench jaws open twice as fast as a standard adjustable wrench.
  • Both sets of pliers feature comfort grip handles for non-slip usage.
Check Stock

GEARWRENCH 1/2\ Drive Chain Wrench - 2595D

  • [PREMIUM MATERIAL AND DETAIL FOCUSED DESIGN] TICONN combination ratcheting wrench sets are made from Chrome Vanadium steel (Cr-V) for both wrench body and ratchet wheels. Multiple layers of plating ensure the wrenches set won’t chip or rust. Stamped size marks are easier to read and will last forever. Tightening direction is marked on both sides of the rachet.
  • [COMPACT EASY TO CARRY STORAGE RACK] Our compact easy carry wrench organizer is made from high-quality nylon material which is flexible and strong. You can also easily hang the mechanic tool set on your tool wall or put it inside your drawer. The compact design of the ratchet wrenches set will save you more drawer space compared with a rollup storage bag.
Check Stock

DISEN 35 Pieces Allen Wrench Set, SAE & Metric Allen Hex Key Set Torx Star Key Set, Long Arm Ball Head Design with T-Handle, Heat Treated Chrome Vanadium Steel

  • 【Premium Material】DISEN Allen Wrench Sets are made of high quality heat treated chrome vanadium steel for great hardness and durability, and finished with black oxide for anti-corrosion and rust prevention. Every hex key is stamped with size on the surface so that you can easily get the size you want.
  • 【Multiple Size Selection】DISEN 35 Pieces Allen Key Sets include SAE, Metric and Torx Star Sizes. SAE (13pc): 1/20, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8 inch. Metric (13pc): 1.27, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 8, 10mm. Torx Star (9pc): T10, T15, T20, T25, T27, T30, T40, T45, T50.
  • 【T-Handle & Ball Head Design】DISEN Allen Key Set comes with a durable T-handle that allows you to apply torque to the wrench without hurting your fingers and add more torque strength. The chamfered edges and the long arm ball head design provide a 25-degree entry to the hard-to-access space.
  • 【Useful Tools】DISEN Allen Wrench Key Sets are useful hand tools and small enough to go into the tight space where traditional hex key can not reach. You can use them to easily tighten or loosen the bolt and nut, suitable for auto repair, DIY project, and household appliance maintenance.
  • 【Quality Guarantee】We assure you that every ....
Check Stock

WORKPRO 12-Piece Premium Combination Wrench Set,Metric 8-19mm,Cr-V 12-point Wrench Sets,Mirror Polish Chrome Plating with Organization Bag

  • Wrench Sizes: WORKPRO Metric Wrench set includes 12 pieces wrenches covering sizes 8,9,10,11,12,13,14,15,16,17,18,19mm, satisfying basic needs. Size marking on both ends of the wrench for easy identification..
  • 12-Point Box End: Precision machined 12 point fits hex nuts and bihexagonal nuts for quick engagement of fasteners, providing a more precise fit. To prevent dropping and round-off, it applies force to the flat sides of the fastener, not the corners..
  • 15-Degree Offset Design: Box end design prevents slippage during tightening and reduces damage to the nut edge. It is offset by 15 degrees, creating clearance for your fingers to operate and work in tight places, making it easier to reach obstructions around..
  • Build to Last: Our METRIC Wrench Sets are forged from chrome-vanadium steel, these wrenches are designed for longevity and durability. Mirror chrome finish provides resistance to rust, abrasion and corrosion, increase service life..
  • Convinent Storage: This wrench set comes with a 20.5 by 11.4 inch Oxford cloth roll bag for tear resistance and toughness. 12 compact pockets are quite suitable for each combination wrench. Three hanging holes for easy suspension..
Check Stock

Outdoor Sports 6.7 Inch Aluminum Length Lightweight, Black

  • 【Perfect Compatibility】: Our picatinny rails with standrant specification allowing you add on any standard 21mm Picatinny accessories. Such as flashlights, iron sight, red green dot sights,or other more tactical accessories..
  • 【Simple to Install & Superior Support】: Install screws by allen wrench tool, easy to install or remove. Perfect Lock System and once tightened they have not shaken loose . Superior Support makes it a great addition to help upgrade your style!.
  • 【Super Multi-size Rail Pack】: Pack Of 13-slots, 11-slots, 9-slots, 7-slots, 5-slots, 3-slots picatinny rails, 13 sets matched screws, 13 sets locking T-nuts included a couple extra screw and T-nuts set and 6 Pcs Allen Wrench, perfect for customizing hunting shooting!.
  • 【Premium Aircraft Aluminum】: Precision machined out of solid structure aircraft aluminum alloy and high strength steel in black matte coating anodizing finish with shiney..
  • 【Durable but Lightweight Material】: The longest rail weight is just 1.42Oz. Not only Offer durable safe but also lightweight performance in the field..
Check Stock

QANVEE Shed Door Latch T-Handle Lock Kit with 4 Keys,Storage Barn Shed Door Hardware Lock Set 4½' and 5½' Stem

  • 5½" Stem fits storage Sheds doors 4½ inch thick or less..
  • Heavy Duty metal lock kit with Black Powder Coated Finish.
  • Back D-handle is Adjustable for doors of varying thickness by allen wrench.
  • Lock Set Includes: Front T-Handle, Back D Handle, 2 Phillips head screws And allen wrench.
  • Comes with 4 keys just in case you might lost it.Keyed alike for every 200 sets and different for the next,So you will most likely(more than 98%) to get the same keys if you order 2 sets or more at a time..
Check Stock

GreatNeck 74206 25 Piece Folding Star, SAE, And Metric Hex Key Set, Allen Key Set, Labeled Wrench Sizes, Adjustable, Color Coded Body for Easy Identification

  • Adjustable Fasteners: This folding Allen wrench set provides a perfect fit for bolt and fastener heads.
  • Allen keys can be adjusted for a more customized feel.
  • Convenient Features: Allen wrench key set includes clearly labeled wrench sizes and a color coded body.
  • Quickly select the right SAE, metric, or star hex key with this hex wrench set.
  • Durable Construction: Foldable Allen key set is made of drop forged heat treated steel for strength and durability.
  • Allen wrench hex keys resist rust and corrosion.
  • Comfortable to Use: These hex key sets feature an ergonomic grip for steady and comfortable use.
  • Hex set tools provide maximum comfort while completing repairs or maintenance work.
  • Included Sizes: Metric: 1.5, 2, 2.5, 3, 4, 5, 6, 8 millimeter.
  • SAE: 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4 inch.
  • Star: T9, T10, T15, T20, T25, T27, T30, T40.
Check Stock