ReviewsWrite Eeprom Of Mcu

ft232rl USB uart TTL 3.3v Cable with 3.5mm Stereo Jack Serial Cable TTL 3.3v to USB Cable Compatible for ftdi ttl-232r-3.3v-aj

  • USB to UART cable with +TTL level UART signals with FTDI chipset.
  • Standard Pinout: Tip-TX, Ring-RX, Sleeve-GND.
  • 3.5mm 3P audio jack male ，2 core and spiral, 24 AWG diam=5mm.
  • Support Android, Support Win 8, Win 7, XP, 2000, Linix, Mac OS Support EEPROM, support Vendor ID re-write,support Mprog Support FTDI VCP driver and....
Check Stock

HiLetgo BTS7960 43A High Power Motor Driver Module/Smart Car Driver Module for Arduino Current Limit

  • 5V isolate with MCU, and effectively protect MCU.
  • Voltage indication of motor driver output end.
  • Just need four lines from MCU to driver module (GND. 5V. PWM1. PWM2).
  • isolation chip 5 V power supply (can share with MCU 5 V)..
  • Able to reverse the motor forward, two PWM input frequency up to 25kHZ.
  • two heat flow passing through an error signal output..
  • Isolated chip 5V power supply (can be shared with the MCU 5V), can also use the on-board 5V supply.
Check Stock

USB to TTL Serial 3.3V UART Converter Cable with FTDI Chip Terminated by 6 Way Header Works with Galileo Gen2 Boards/BeagleBone Black/Minnowboard Max and More

  • Moyina USB TTL +3.3V levels (signals only, VCC= +5V) Serial cable is a range of USB to TTL serial UART converter cables featuring FTDI's FT232RL USB....
  • Provides a fast, simple way to connect devices with a TTL level serial interface to USB. Support EEPROM, Vendor ID re-write and Mprog3.5.
  • Provides access to UART Transmit (Tx), Receive (Rx), RTS#, CTS#, VCC (5V) and GND connections. RoHS compliant and CE approved.
  • Operating system Compatibility: Windows 10/8/7, Windows Vista, Windows XP, Windows 98, Windows ME, Linux and Mac OS. Please check for details in....
  • The USB side of the cable is USB powered and USB 2.0 full speed compatible, while the other end is a 6 way, 0.1”, Single-In-Line (SIL) pitch gold....
Check Stock

AiTrip CH341A 24 25 Series EEPROM Flash BIOS USB Programmer + SOIC8 Clip

  • The SOP8 clip enables in-circuit programming of EEPROM without disassembling the chip, making flashing the BIOS simpler and more efficient..
  • The main purpose of the CH341A Programmer is to back up, erase, program, calibrate and other actions on various software..
  • The SOP8 clip support chip size: Pitch 1.27MM, full range SOP8 wide body and narrow body..
  • The CH341A Programmer support most 24 / 25 Series EEPROM BIOS SOP8 SOP16 chip on the market. Note: Due to the characteristics of the CH341A chip, the ESMT SST class 25 chip can only be read and cannot be written..
  • Tips: Some chips are affected by peripheral circuits and cannot be clipped directly. Please check the chip location on the motherboard before purchasing!.
Check Stock

AiTrip EEPROM BIOS USB Programmer CH341A + SOIC8 Clip + 1.8V Adapter + SOIC8 Adapter For 24 25 Series Flash

  • Test Clip Pin format: SOIC8 SOP8 matrix ,Programmer TL866 EZP2010 RT809H CH341A.
  • SOIC8 SOP8 Clip DIP8 for in-circuit programming For EEPROM /25CXX/24CXX on ZIP USB.
  • Test Clip Beryllium copper plating needle, without welding, can be directly inserted.
  • USB Programmer CH341A Series Burner Chip 24 EEPROM BIOS Writer 25 SPI Flash AE1185.
Check Stock

SunFounder R3 BoardBundled with Mega 2560 R3 ATmega2560-16AU Board for Arduin

  • R3 board compatible with Arduino. The board for Arduino use ATMEGA16U2 chip, Faster transfer rates and more memory..
  • R3 board control using r3 ATmega328P chip. Includes new pin configuration (SCL, SDA, IOREF).Clearly print on the female header connector, more precise and easier to use the wire..
  • The mega 2560 R3 Board is 100% compatible with Arduino. Powered via the USB connection or with an external power supply. The power source is selected automatically..
  • The ATmega2560-16au has 256 KB of flash memory for storing code (of which 8 KB is used for the bootloader), 8 KB of SRAM and 4 KB of EEPROM (which can be read and written with the EEPROM library). Comes preburned with a bootloader that allows you to upload new code to it without the use of an external hardware programmer. It communicates using the original STK500 protocol (reference, C header files)..
  • This version is optimized in the original version, both to ensure consistent and compatible with the original, but also easy to use..
Check Stock

SunFounder Mega 2560 R3 ATmega2560-16AU Board and Ethernet Shield W5100 for Arduino

  • The mega 2560 R3 Board is 100% compatible with Arduino. Powered via the USB connection or with an external power supply. The power source is selected automatically..
  • The ATmega2560-16au has 256 KB of flash memory for storing code (of which 8 KB is used for the bootloader), 8 KB of SRAM and 4 KB of EEPROM (which can be read and written with the EEPROM library)..
  • The mega 2560 comes preburned with a bootloader that allows you to upload new code to it without the use of an external hardware programmer. It communicates using the original STK500 protocol (reference, C header files).This version is optimized in the original version, both to ensure consistent and compatible with the original, but also easy to use..
  • With this Ethernet Shield, for Arduino board can be used to connect to internet. It can be used as server or client. Directly plug puzzle board, no soldering required..
  • This Ethernet Shield is directly compatible with Arduino official Ethernet Library. It adds a micro-SD card slot, which can be used to store files for serving over the network..
Check Stock

Captain America: Symbol Of Truth (2022-) #1

  • 6-INCH SCALE COLLECTIBLE MCU 2-PACK: Fans, collectors, and kids alike can enjoy this 2-Pack of 6-inch scale Captain America figures, inspired by the Marvel Cinematic Universe!.
  • INSPIRED BY THE MARVEL CINEMATIC UNIVERSE: These Captain America 2-Pack figures feature premium MCU-inspired design, detail, and articulation for posing and display in your Marvel collection.
  • SENTINELS OF LIBERTY: This Captain America 2-Pack features Steve Rogers from Marvel Studios’ Avengers Endgame, and Sam Wilson from Marvel Studios’ Falcon & the Winter Soldier on Disney+!.
  • PREMIUM ACCESSORIES: This Marvel Legends Series Captain America 2-Pack figures feature multiple MCU-inspired accessories, including shields, alternate heads, and fists!.
  • MARVEL UNIVERSE IN 6-INCH SCALE: Look for other Marvel Legends action figures inspired by the Marvel Cinematic Universe, including the Winter Soldier, Vision, and Scarlet Witch! (Additional figures each sold separately. Subject to availability.).
Check Stock

Alone in This (You Have Me)

  • 6-INCH SCALE COLLECTIBLE MCU 2-PACK: Fans, collectors, and kids alike can enjoy this 2-Pack of 6-inch scale Captain America figures, inspired by the Marvel Cinematic Universe!.
  • INSPIRED BY THE MARVEL CINEMATIC UNIVERSE: These Captain America 2-Pack figures feature premium MCU-inspired design, detail, and articulation for posing and display in your Marvel collection.
  • SENTINELS OF LIBERTY: This Captain America 2-Pack features Steve Rogers from Marvel Studios’ Avengers Endgame, and Sam Wilson from Marvel Studios’ Falcon & the Winter Soldier on Disney+!.
  • PREMIUM ACCESSORIES: This Marvel Legends Series Captain America 2-Pack figures feature multiple MCU-inspired accessories, including shields, alternate heads, and fists!.
  • MARVEL UNIVERSE IN 6-INCH SCALE: Look for other Marvel Legends action figures inspired by the Marvel Cinematic Universe, including the Winter Soldier, Vision, and Scarlet Witch! (Additional figures each sold separately. Subject to availability.).
Check Stock

KeeYees SOP8 SOIC8 Test Clip and CH341A USB Programmer Flash for Most of 24 25 Series EEPROM BIOS Chip with PDF Tutorial

  • The SOP8 clip enables in-circuit programming of EEPROM without disassembling the chip, making flashing the BIOS simpler and more efficient..
  • The main purpose of the CH341A Programmer is to back up, erase, program, calibrate and other actions on various software..
  • The CH341A programmer supports most of the 24/25 series EEPROM SOP8 chips on the market, but not all of them. Please be sure to check whether your chip model is within the compatible range in the product description before purchasing..
  • The SOP8 clip support both wide body and narrow body SOP8 chip with 1.27MM Pitch..
  • We provide detailed PDF tutorials, CH341A software, and drivers, which will be sent to you by email after the order. If you do not receive it, please send us a message..
Check Stock

XTOOL X100 Pad Plus Key Fob Programming Tool with EEPROM Adapter, Full Systems Diagnosis, 22+ Services, ABS Bleed/Injector Coding/Oil Light Reset/SAS Adjustment/Throttle Relearn, 2 Years Free Updates

  • 【Powerful IMMO & Key Programming】: XTOOL X100 Pad Plus key fob programming tool works with EEPROM adapter, enable you to add/erase keys.
  • etc. ⭐The function is NOT universally compatible with all car models..
Check Stock