ReviewsWrought Iron Bench Legs

SJYDQ Bar Stool-The Urban Port Antique Colonial Attractive Wooden with Iron Legs ( Size : 45cmx75cm )

  • ★Ergonomically designed with workmanship, these barstools not only look great but are also incredibly comfortable..
  • ★It is perfect for your kitchen, party room, lounge area, cafe bar or office use..
  • ★Solid wood seat cushions are made of imported solid wood, with clear texture and formaldehyde-free -friendly spray paint, waterproof, -proof and high-temperature resistant..
  • ★The selected wrought iron chair legs are made of high-purity original iron, which is made of high-pressure, retro-old, comfortable, and resistant to corrosion and wear..
  • ★The wrought iron foot iron frame is made of solid high temperature forging into other shapes of iron, the cast iron is easy to break, the wrought iron is not easy to break, and the wear resistance and shock absorption are good..
Check Stock

Wrought Iron Patio Furniture Legs Caps, 1-1/2

  • 【SIZE】: Our wrought iron chair glides have a diameter of 1.5” and are designed to fit most pieces of common metal patio furniture. Please check whether your wrought iron chair legs have remnants of old feet stuck in them before installation, if yes you can simply with a screwdriver to remove them, to ensure proper fit. (Please measure the inner diameter of the chair leg caps where the furniture glide will be installed before ordering).
  • If you are not satisfied with the furniture glides or have any issues, you could contact Portagen anytime. And you will get a satisfactory answer and solution within 24 hours..
  • 【 SAY GOODBYE TO NASTY SCRATCHES AND RUST】These outdoor chair leg floor protectors not only prevent your patio floors or deck from scratched or rusted but also help the chairs and tables slide with ease.Our wrought iron furniture glides are made with UV resistant plastic that will provide years of use and endure whatever weather may come.
  • 【TIPS FOR EASY INSTALLATION】：A rubber hammer or mallet is recommended for installation. It is helpful to putting this replacement leg end caps in hot water for about 1 minute or you can heat them with heat gun to soften them, then you will find it’s easier to make the glides inserted wit....
Check Stock

1-1/2 in. Plastic Insert Patio Cups

  • Designed to fit inside the base of wrought iron chair legs.
  • Helps protect both furniture and floors and cover sharp edges.
  • Round white plastic insert cups for the feet of wrought iron furniture.
Check Stock

Prescott Plastics 1 Inch Round Plastic Plug, Pipe Tubing End Cap, Durable Chair Glide (10)

  • Fits 1″ OUTSIDE round tubing with hole sizes from 3/4″ to 15/16″ (.75″ to .93″). Head Size is 1″..
  • High-grade Prescott Plastics one inch black ribbed plugs work great for preventing scuffs on wood floor or as protection glides on chair tips, bench feet, table legs, bar stool foot sliders, chair leg protectors, patio furniture inserts, and much more. They are also designed to hold up against impact abuse, and harsh weather conditions..
  • Our easy to install 1.0 inch snap in plugs serve as a long-lasting solution for many household or outdoor projects including replacements for fence/fencing railing posts, gate rail post covers, trailer frame ends, pole pipe rod caps, metal bike rack fittings, wrought iron steel finishing plugs, or any circular opening..
Check Stock

Achla Patio Plant Stands, Black, 18\ H, Pack of 2

  • Set of 2 black, wrought iron stands wonderfully elevate potted plants.
  • Circular top and intersecting base slats hold your potted plants easily.
  • Four legs elevate each item to 18" tall, for a striking look.
  • Powder coated finish on the wrought iron units adds strength and longevity.
  • Feet flare outward for resting on a level surface.
Check Stock

Prescott Plastics 1 3/4 Inch Round Plastic Plug, Pipe Tubing End Cap, Durable Chair Glide (8)

  • Fits 1 3/4″ (1.75 inch OUTSIDE diameter) round tubing with INSIDE hole diameters (ID) from 1 1/2″ to 1 5/8″ (1.50″ – 1.68″). Head size is 1 3/4″..
  • High-grade Prescott Plastics black ribbed plugs work great for preventing scuffs on wood floor or as protection glides on chair tips, bench feet, table legs, bar stool foot sliders, chair leg protectors, patio furniture inserts, and much more. They are also designed to hold up against impact abuse, and harsh weather conditions..
  • Our easy to install 1-3/4″ snap in plugs serve as a long-lasting solution for many household or outdoor projects including replacements for fence/fencing railing posts, gate rail post covers, trailer frame ends, pole pipe rod caps, metal bike rack fittings, wrought iron steel finishing plugs, or any circular opening..
Check Stock

Wrought Iron Patio Furniture Legs Caps 1-1/2 56 Packs Floor Protectors Plastic Round Inserts Feet Caps for Outdoor Metal Chair and Table Glides

  • Say goodbye to nasty scratches on your patio floors.These wrought iron chair glides help to protect your floors from permanent damage.
  • Our wrought iron chair glides have a diameter of 1.5” and they are easily installed using a rubber hammer or mallet..
  • Fits most standard sized patio chairs that require a 1.5 inch in diameter cap. Please measure the diameter of the wrought iron cup area where the....
  • Our 56 pack of patio chair glides is enough for 14 chairs (with 4 legs each)..
  • Spend less time replacing your chair glides and enjoy more time relaxing..
Check Stock

RW Sales 25 Pack 1 Inch White Plastic Sidewall Insulation Plugs- 10025

  • HOW TO FIT: 1/1” (Outside dimensions) Square Plastic inserts will fit inside hole dimensions of 3/4” – 15/16” (Inside dimensions) with a wall thickness of 0.042” to 0.122” (10-20 gauge). NOTE: It will not fit a 1/1” opening..
  • EASY TO INSTALL: Our 1/1" snap in plug is a long-lasting solution for many household or outdoor projects including: Fence/Fence Railing Posts, Gate Rail Post Covers, Trailer Frame End Posts, Pole Pipe Rod Caps, Metal Bike Fittings, Wrought Iron Steel Finishing Plugs..
  • FLOORING PROTECTION: Prescott Plastics black ribbed plugs prevent scuffs on wood and other natural floors. They provide a protective “glide” for chair tips, bench feet, table legs, bar stools, patio furniture, and other furniture designed for furniture inserts and plugs..
  • PREMIUM QUALITY PLUGS: Our plugs and inserts are designed to hold up in all harsh weather conditions and high traffic areas..
  • MADE IN UK: These Plugs are specially designed and produced in UK to maintain quality, endurance and durability..
Check Stock

32 Pack of 1.5” Patio Furniture Glides/Feet/Caps for Wrought Iron Outdoor Furniture – Protect Your Floor Surfaces from Scratches, Replacement for Eight Chairs (with 4 Legs), Easy to Install Impresa

  • Easy To Install: Our wrought iron chair glides have a diameter of 1.5” and are designed to fit most pieces of common patio furniture. They are easily installed using a rubber hammer or mallet. No adhesives required..
  • Keeps Floors Protected: These wrought iron chair glides help to provide the much-needed cushion to protect your floors from permanent damage. Say goodbye to nasty scratches on your patio floors. These chair glides help to prevent moisture build-up that may cause rust on your wrought iron tables or chairs..
  • Excellent Value: Our 32 pack of patio chair glides is enough for 8 chairs (with 4 legs each). These durable leg cushions are designed to last for seasons to come..
  • Will it Fit? These are not adjustable and are not a universal fit. Designed with weep holes to fit inside the chair leg of most standard sized patio chairs and stools that require a 1.5 inch in diameter cap. Please measure the diameter of the wrought iron cup area where the glide will be installed (see infographic in images). Please reach out to us through our seller page with any questions..
  • Made To Last: Our wrought iron furniture glides are made with UV resistant outdoor-ready plastic and designed to endure whatever weather may come. Spend less time replacing your chai....
Check Stock

Prescott Plastics 1 1/4 Inch Round Plastic Plug, Pipe Tubing End Cap, Durable Chair Glide (20)

  • Fits 1 1/4″ (*OUTSIDE, NOT 1.25 inch hole*) round tubing with INSIDE hole diameters (ID) from 1″ to 1 3/16″ (1.0″ to 1.19″) and wall thickness of .040 – .125″ (10-20 gauge).
  • High-grade Prescott Plastics black ribbed plugs work great for preventing scuffs on wood floor or as protection glides on chair tips, bench feet, table legs, bar stool foot sliders, chair leg protectors, patio furniture inserts, and much more. They are also designed to hold up against impact abuse, and harsh weather conditions..
  • Our easy to install 1-1/4″ inch snap in plugs serve as a long-lasting solution for many household or outdoor projects including replacements for fence/fencing railing posts, gate rail post covers, trailer frame ends, pole pipe rod caps, metal bike rack fittings, wrought iron steel finishing plugs, or any circular opening..
Check Stock

Prescott Plastics 1 1/2 Inch Round Plastic Plug, Pipe Tubing End Cap, Durable Chair Glide (8)

  • Fits 1 1/2″ (one & a half inch outside diameter, *NOT 1.5 INCH HOLE SIZE*) round tubing with INSIDE hole diameters (ID) from 1 1/4″ to 1 7/16” (1.25″ to 1.43″) and wall thickness of .040 – .125″ (10-20 gauge).
  • High-grade Prescott Plastics black ribbed plugs work great for preventing scuffs on wood floor or as protection glides on chair tips, bench feet, table legs, bar stool foot sliders, chair leg protectors, patio furniture inserts, and much more. They are also designed to hold up against impact abuse, and harsh weather conditions..
  • Our easy to install 1-1/2″ inch snap in plugs serve as a long-lasting solution for many household or outdoor projects including replacements for fence/fencing railing posts, gate rail post covers, trailer frame ends, pole pipe rod caps, metal bike rack fittings, wrought iron steel finishing plugs, or any circular opening..
Check Stock