ReviewsWyeth Scott Power Puller

ARES 15036 - Reversible 2/3 Jaw 2-Ton Ratcheting Gear Puller - Chrome Moly Steel Construction - 2-Inch to 3-Inch Adjustable Range - Removes Gears, Pulleys, and Flywheels

ITEM SPECIFICATIONS: Our 2/3 Jaw 2-Ton Ratcheting Gear Puller features three jaws and has an adjustable range of 2 to 3 inches. The smooth ratcheting action makes making adjustments a breeze, as the locking ratchet design holds the clamp open for easy installation..
DESIGN CONSIDERATIONS: The 2-Ton Ratcheting Gear Puller features high strength Chrome Moly Steel construction and a Manganese Phosphate coating to help prevent rust and corrosion. Our design enables the 3-jaw gear puller to quickly convert to a reversible gear puller or a 2-jaw gear puller in no time, and the finely threaded center screw allows for enhanced pulling power..
COMMON APPLICATIONS: The super strong low profile foot design allows for access to tight or confined spaces that traditional pullers just can't reach, as this versatile gear puller allows you to smoothly and safely slide gears, pulleys, flywheels and other press-fit parts off shaft..
RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES Ratcheting Gear Puller, simply contact customer service for troubleshooting help, parts, replacement, or refund..
ASPCA BUSINESS AMBASSADOR: We are proud to be part ....

Check Stock

ABN Slide Hammer Puller Set - 5 lb Slide Hammer Axle and Hub Puller and Dent Remover Unit Auto Body Hammer Tool

[Versatile Slide Hammer Set] Whether pulling out deep dents on metal surfaces or removing mechanical, press-fit parts, the ABN 5 Pound Slide Hammer Bearing Puller Set works wonders.
Lightweight dent puller slide hammer tool ensures maximum pull power.
[Fits Your Needs] Each slide puller set includes a 23-inch (58.4cm) T-style slide hammers bar, a 5 lb hammer weight, and a nut.
3-inch machined threaded section fits your internal or external 5/8-inch x 18 threaded adapters (not included).
[Easy to Use] Once attachment has been connected and is in place, slide the large slide hammer close to the end of the CV joint puller tool.
Then, pull back on the T handle, while you snap the weight towards the handle.
Weighted slide hammer adds torque and pull-power.
[Safe for Your Vehicle] Slide hammer and attachment design focused the added torque to a stable area to prevent damage that can happen when trying to remove press-fit parts.
[Built to Last] Hardened shaft and chrome-plating ensure optimum strength and resistance from rust, while the 4.7-inch (12cm) T-shaped handle provides a proper gr....

Check Stock

Bestauto Dent Puller Machine 3800A Vehicle Panel Spot Puller Dent Bonnet Door Repair GYS2700 Dent Puller 12KW Spot Welder for Car Dent Repair

Small Welding Traces: Compared with other products, our spot puller's single-sided welding thickness is 0.6-1.2 mm, so the welding spots are small,....
Heavy-duty Welding Gun: The durable welding gun is made of premium iron material, which is corrosion-proof and features high strength. Besides, you....
9 Modes for Selection: 9 Welding modes are provided for you to choose from and multiple welding power levels to adjust. The functions and power will....
Efficient Cooling System: The holes on the side can quickly perform heat dissipation without a fan, making the spotter dent puller not so easy to....
Wide Application: No matter what type of vehicle it is, cars, trucks, vans, our stud gun dent puller kit can target car collision damage, such as....

Check Stock

Thy Name We Praise - John Wyeth Franklin Sheppard Charles C Converse Anonymous John B Dykes George J Elvey Conrad Kocher - Albin C Whitworth - Carl Fischer - Piano - Piano Unaccompanied - SGB504

John Wyeth, Franklin Sheppard, Charles C. Converse, Anonymous, John B. Dykes, George J. Elvey, Conrad Kocher - Albin C. Whitworth (Author).
01/25/1984 (Publication Date) - Carl Fischer (Publisher).

Check Stock

Inscape Data Dent Puller 2 Pack Suction Cup Dent Puller Powerful Car Dent Removal Tools for Car Dent Repair Glass Screen Tiles & Objects Moving

【Strong Suction】-- The maximum horizontal suction power of the dent puller is 110 lbs and the maximum vertical suction is 77 lbs. The dent puller....
【No Trace】-- Adjust the handle to stand alone, place the suction cup on the surface of the object, press down on the suction cup perpendicular to....
【Portable & Durable】-- The small dent puller is durable and has a long service life. The single-stroke pump is easy to operate. One-hand buckle....
【High Quality】-- The suction cup handle and shell are made of aluminum alloy, the handle is firmly welded to the suction cup, so the handle will....
【Widely Used】-- The dent puller not only can be used as a tool for repairing car dents, but also to disassemble screen or used as a phone stand to....

Check Stock

YATOINTO Cable Hoist Puller 4400LB Heavy Duty Hand Puller 2 Ton Come Along Cable Puller with 2 Hooks Winch Come Along Cable Puller for Lifting Pulling Building Garages Warehouse

✔ HIGH QUALITY - 2 Ton/4400 LB Ratchet Puller with heavy duty steel construction for added durability, thick body frame and comes along with solid metal gear.
✔ STRONG CABLE & HOOKS - The Power Hand Lever Puller is equipped with heavy duty cable with two strong alloy hooks and the hooks with safety latch, Its improve stability and safety.
✔ PREMIUM HANDLE - New and improved larger handle for extra leverage, ergonomically designed. With texture design, increase comfort and friction.
✔ WILDLY APPLICATION - 2 ton come along hand winch cable puller power Ideal for construction, landscaping, farm projects, automotive, and outdoor recreational activities.
✔ SMOOTH OPERATION & SERVICE - Powerful ratcheting system allows for one-handed operation when pulling even the heaviest loads. If you have any questions about our products, please at any time contact us.

Check Stock

YIUIY Car Dent Repair Pullers Air Pneumatic Dent Puller Suction Cup Car Auto Body Repairing Slide Hammer Kit Hammer Tools Hand Tool

【FITMENT】:Slide hammer puller is suitable for the sheet metal processing of automobile, refrigerator, Motorcycle Body and washing machine..
【PREMIUM MATERIALS】:This slide hammer puller is made of galvanized steel materials, more tough is not easy to break,it is corrosion and oxidation resistance and will not hurt the car body, fits to more different dents..
【PROTECTS THE ORIGINAL PAINT】:Paintless Dent Repair Kit Pulls Dents Out Without Harming The Original Paint Which Gives The Panel A Higher And Longer Protection With Its Special Coating..
【PULL OUT DEEP & BIG DENTS EASILY 】:The Professional Air Dent Puller Produces Much Stronger Power Than An Adhesion One. Aims At Severe Dents Instead Of Small Pits..
【ESSENTIAL TOOLS FOR DENTS】:This pneumatic dent puller is an essential tool for pulling out dents from vehicles. The dents on cars can be simply removed by placing the suction cup over the dent on the panel and using the built-in slide hammer..

Check Stock

Thur amo 2 Jaw Bearing Puller, Adjustable Two Claw Pilot Remover Hand Repair Tool Carbon Steel Pump Pulley Remover Straight Type for Motorcycle Car Auto (3in - 38x65mm)

【Adjustable Design】 The puller can be bilateral rotation, enable stretching size and working space. Two jaw with adjustable clamping depth, fit for different size gears and bearings.
【Carbon Steel Material & Foring Process】 The bearing gear puller is made by carbon steel, and the tip of the mandrel undergoes a special heat treatment process to make it more solid and durable.
【Reinforcement Equipment】 The bearing gear puller comes with hexagonal screw and thread, will not slip, used for tightening, high strength.
【Professional Repair Tools】 This removal tool is particular for slide gears, pulley, and flywheel, making removal simple and without any damage. Give you positive pulling power to remove bearings groove pulleys on alternator and power steering pumps.
【Wide Application】 Suitable for automotive flywheel, motorcycle wheel, bicycle wheel, car wheel, machine wheel, pump bearing, generator bearing, machine bearing and so on.

Check Stock

Thur amo 2 Jaw Bearing Puller, Adjustable Two Claw Pilot Remover Hand Repair Tool Carbon Steel Pump Pulley Remover Straight Type for Motorcycle Car Auto (2.5in - 35x45mm)

【Adjustable Design】 The puller can be bilateral rotation, enable stretching size and working space. Two jaw with adjustable clamping depth, fit for different size gears and bearings.
【Carbon Steel Material & Foring Process】 The bearing gear puller is made by carbon steel, and the tip of the mandrel undergoes a special heat treatment process to make it more solid and durable.
【Reinforcement Equipment】 The bearing gear puller comes with hexagonal screw and thread, will not slip, used for tightening, high strength.
【Professional Repair Tools】 This removal tool is particular for slide gears, pulley, and flywheel, making removal simple and without any damage. Give you positive pulling power to remove bearings groove pulleys on alternator and power steering pumps.
【Wide Application】 Suitable for automotive flywheel, motorcycle wheel, bicycle wheel, car wheel, machine wheel, pump bearing, generator bearing, machine bearing and so on.

Check Stock

VEVOR Carrier & Pinion Bearing Puller Compatible with Dana 30,40,50,60,70, 80, Ford 10.25 Bearings Pinion Puller Tool with 3 Clamshells 45# Steel Clamshell Bearing Puller for Auto Repair

Great Compatibility: The clamshell carrier bearing puller is compatible with Dana 30, 40, 60, 70, Ford 10.25" bearings. With the clamshell bearing puller, you can quickly remove the bearings. In addition, its power is evenly distributed, so less damage will be brought to your pinion bearings..
Premium Performance & Features: With high working efficiency, this carrier pinion bearing puller can effortlessly remove the pinion bearings with minor damage, drastically reducing dismantled time. And the carrier bearing puller will no longer easily pry into the pinion's sealing surface..
Complete Equipment: All necessary parts are ready for you. There is a main puller body, plug, center bolt, 3 clamshells, retaining ring, and adjuster rings. Besides, this unit comes with a handy stand, so you can group all the working parts together..
Easy to Operate: There is no need for other complex working tools. Firstly, place the main body over the plug and adjust the lower and upper adjusting ring. Secondly, select a proper clamshell and tighten the retaining ring. Finally, you can use an impact gun to remove the bearing..
Superior Material: The clamshell bearing tool is made of durable 45# steel, providing good performance in withstanding abrasion, corrosion, and impa....

Check Stock

ChgImposs Screw Thread Pitch Cutting Gauge Tool Set, Stainless Steel Centre Gage with 55 Degree Inch System & 60 Degree Metric System

Used to measure the pitch of the thread and the tooth-shaped corner.
It sets 4pcs centre gage 55 Degree Inch System & 60 Degree Metric System, 52 pcs.
Center Gage use to grind and position thread cutting tool on a lathe. Typically used to check the thread size determination is correct.
All 52 pcs was made by stainless steel, not easy to rust. Ensure the accuracy of measurement..
Package Include: 1 x 52 Blade thread gauge.
1 x ISO Metric 60°centering gauge thread gauge Tool.
1 x English Wyeth 55°centering gauge thread gauge Tool.
1 x American Standard 60°centering gauge thread gauge Tool.

Check Stock