ReviewsX 2muzzle Brake

Cyleto Front and Rear Brake Pads for HARLEY DAVIDSON XL1200C Sportster 1200 Custom 2004-2013 / XL1200L Sportster Low 2007 2008 2009 2010 2011

  • Dimension: F:103 x 48 x 10.9mm (4.055 x 1.889 x 0.429 inch) R:87 x 50 x 10.4mm (3.425 x 1.968 x 0.409 inch).
  • Easy install,Perfect fit the vehicles list in title!.
  • Provide a safe stopping and the brake pads designed for the brake disk to decrease the wear..
  • ADVICE:If The Brake Disc Wear Serious, Please Replace It Before Install The Brake Pads..
Check Stock

Cyleto Front and Rear Brake Pads for Honda CBR600 CBR 600 F3 1995 1996 1997 1998 / CBR 600F CBR600F CBR 600 F 1995 1996 1997 1998

  • Dimension: F:102 x 38 x 9mm (4.016 x 1.496 x 0.354 inch) R:86.3 x 41.4 x 10.2mm (3.398 x 1.63 x 0.401 inch).
  • Easy installation and Guaranteed OEM Quality and Fitment. (please check your motorcycle model before buying).
  • Provide a safe stopping and the brake pads designed for the brake disk to decrease the wear..
  • ADVICE: If The Brake Disc Wear Serious, Please Replace It Before Install The Brake Pads..
Check Stock

MuHize 1/4\ Brake Line Tubing Kit -25 Ft. of 1/4 Flexible Copper Coated Brake Line Tube Roll 25 ft (Includes 16 Inverted Flare Fittings)

  • PACKAGE INCLUDE - MuHize Brake Line Kit Replacement with 16 Fittings: ① 2 x 1/4”(7/16-24) Inverted Tube Nut.
  • ② 10 x 1/4” (7/16-24) Inverted Tube Nut (Long).
  • ③ 2 x 1/4”(9/16-18) Inverted Tube Nut.
  • ④ 2 x 1/4”(1/2-20) Inverted Tube Nut.
  • SUPER EASY BENDING & FLARING - MuHize brake lines are easy to be bent with great flexibility by hand and flare by simple tools..
  • HIGHER QUALITY - MuHize brake lines are made with unique surface treatment. The lastest copper alloy brake line is better than standard steel tubing with corrosion resistance..
  • WIDELY APPLICATION - MuHize 1/4 brake line tubing kit commonly fits for Hydraulic Braking Systems, Fuel Systems, and Transmission Systems,etc. It is also widely fit for household, industrial and commercial uses..
  • PROFESSIONAL - MuHize focus on outstanding features and benefits of brake lines. We promise that if the line is installed correctly out, the lines will extend the lifespan of the vehicle..
Check Stock

4LIFETIMELINES Brake Line Kit – Professional Grade Galvanized Steel Tube 3/16 Brake Line – 25Ft Brake Line Tubing Coil with 16 Fittings

  • FITTINGS INCLUDED: The 4LIFETIMELINES brake line kit was designed for professional use and comes with 16 fittings: Steel Tube Nut 3/16 (3/8-24 I) x 10, Fitting 3/16 (7/16-24) x 2, Steel Tube Nut 3/16 (9/16-18 I) x 2, Fitting 3/16 (1/2-20) x 2..
  • PREMIUM QUALITY & DURABLE: This brake line tubing coil is made with professional grade double-wall galvanized steel tube and zinc coated corrosion-proofing technology, guaranteed to withstand the test of time..
  • ENHANCED FLEXIBILITY: Unlike similar products on the market, this 3/16” brake line meets all SAE and ISO specifications, being highly flexible and allowing for easy bending and shaping without kinking..
  • COMPATIBILITY: The 4LTL professional grade brake line meets SAE J527 international and US standards and requirements, being compatible to use in hydraulic braking systems..
  • EXTRA FEATURES & DIMENSIONS: This brake line tubing coil measures 25ft in length, for a convenient routing and installation. With 0.028” wall thickness, 3/16” OD and universal size, this brake line is a smart and economic replacement!.
Check Stock

GREHUA Rear 4' Brake Band Pin with 70'Throttle Cable Black for Azusa 2251-B Manco Bandit Critter 1492 4316 297 Rotary 484 Predator 212cc 420cc 196cc 6.5Hp Yerf-Dog Go Kart Cart Buggies Mini Bike ATV

  • FITMENT—fit for predator 212cc gx160 gx200 196cc 6.5hp 420cc Manco Oregon Rotary Yerf-Dog Kartco,Road Boss,Thunder Kart Yard Cart Go kart Dune Buggies mini bike ATV.Compatibility:fit for Manco Bandit/Critter/1492/4316/297/10366/B1SB486,Rotary 484,485,Azusa 2251/2251-B,Stens 260-141..
  • EASY TO INSTALL AND HIGH EFFICIENCY—the go kart brake band kit with simple and compact design,it is very easy to install.This brake band does not attach directly to the axle,so it would theoretically fit any size live axle.There is a hole on either end of the brake band.One end fastens to a stud mounted on the cart, but is still able to pivot,and the other end fastens to your brake rod..
  • SIMPLE AND COMPACT DESIGN—simple and compact design can effectively achieve braking effect.And it fits 4 inch Drum {outside diameter–4.2″(106.7mm)} ,4″ brake band is also called a 4-3/16″ brake band..
  • PRODUCT SIZE—brake band wide–0.98″(25mm),thickness–0.24″(6mm),outside diameter–4.44″(113mm),inside diameter–4.21″(107mm),throttle cable total length-70.86″(1800mm) ,casing length 60.43″(1535mm).
  • PACKAGE INCLUDED—1 x black brake band,1 x pin,1 x throttle cable,1 x wrench.
Check Stock

2" DROP SUSPENSION & WILWOOD 4 PISTON BRAKE SET FOR 55-57 CHEVY, CURRIE REAR END, AXLES, 9" FORD POSI-TRAC 3RD MEMBER, RED CALIPERS, 12" ROTORS SPINDLES MASTER CYLINDER BOOSTER CONTROL ARMS

  • Brand New Suspension & 12" Wilwood Brake Kit For 1955-1957 Chevys with 2" Drop Spindles (Part # GMB5557X-K72). This specific set features 2" drop spindles, Rotors, and Red Dynalite 4 piston front calipers & Red Dynalite 4 piston rear calipers. Fits: 1955-1957 Chevrolet Bel Air, Delray, 150, & 210. Excludes All Station Wagons, Sedan Deliveries, and Nomads due to their Bowtie shaped gas tank that requires a centered housing rear end, as opposed to a centered pinion rear end..
  • Includes: *Currie 9-Plus Notch-Back rear end with 31 spline axles (#CE-GMB5557X): Currie crate rear ends are designed to be a bolt-in upgrade. Built to the stock 60” width & pinion specs. Heavy-duty 2" wide leaf spring pads are installed in the stock location for easy bolt-in installation *Southwest Speed 9" Ford Rear End Third Member With Posi Trac-Loc (#603-2078): This kit comes with a 3.70 ratio gear, which is a good cruising ratio. We have ratios from 3.50 to 5.00 that can be substituted in.
  • *Southwest Speed 2" Drop Spindles (SWS Part # 103-9760): SWS drop spindles provide a full 2" drop, while not changing the vehicle's steering geome....
Check Stock

ABN Professional Brake Line Flaring Tool Kit 45 Degrees - Single Bubble Double Flare Tool Kit for Steel Copper Tube

  • [Get a Leakproof Connection]: When building car brake lines, the ABN Professional Brake Flaring Tool Kit adds a flare (makes tubing wider) to brake line end for a leak-free connection without hours of hand cramping or twisting exercises.
  • [Fits Your Application]: 45-degree set creates single, bubble, and double flares on steel, stainless steel, and soft metal (copper, aluminum) brake lines, transmission cooler lines, and fuel lines.
  • For 3/16-inch (4.75mm), 1/4-inch (6.35mm), 5/16-inch (8mm), and 3/8-inch tubing.
  • [Use Your Vise]: Use on a bench-mounted vise in your workshop or on a hitch-mounted vise in the field (not intended for use under car).
  • 6-inch (15.2 cm) T-handle screw clamp holds die and tube in place so you can create flares quickly and easily.
  • [Durability You Need]: Deburred square pipe end with outer edge chamfered approximately 0.25 x 45 degrees.
  • Each die block is 1.7 inches (4.3 cm) long.
  • Approximate 1.5-inch (3.8 cm) actual clamping surface [we recommend only placing bends in the last 2.5 inches (6.4 cm) of tube after flared].
  • [Package Contents]: Brake line flare kit includes (1) brake line flare tool with T-handle and 11-inch lever with 5-inch texturized rubber sleeve (27.9x12.7 cm), (4) end dies, (1) instruction manual, and (1) 14.1 x 6.1....
Check Stock

CDHPOWER Bike Brake, Bike Disc Brake, Bicycle C Brake Caliper, Aluminum Alloy Front & Rear Side Pull Brake Set Bike Accessory for Mountain Bike, Folding Bike, Road Bicycle (Black)

  • Pack of 1 pairs bike brake including 1 x front brake caliper, 1 x rear brake caliper. PLEASE NOTE.
  • Please check if it fits your size before buying.
  • Height of break pad adjustable 20mm;front screw length: 50mm.
  • Made of aluminium Alloy material brake arm that equipped with wear-resistant rubber brake pads, anti-rust and sturdy, making it resistant to collision and not easily deformed to ensure long time use..
  • The grooves on the rubber pads can improve braking efficacy and provide smooth operation to make cycling safer..
  • The length between brake rubber measures 3.15"/8cm. With longer screw shaft is front brake caliper, with shorter screw shaft is rear brake caliper. Great replacement set for mountain bicycle, road bike, most bicycles to provide a smooth braking performance or bringing the bike to a stop.
Check Stock

21PC Universal Disc Brake Caliper Piston Pad Car Auto Wind Back Hand Tool Kit

  • This tool kit allows you to rewind the pistons in brake calipers by hand without damaging the gaskets in the pistons. It does this by allowing the rotation of the piston at the same time as pushing the piston back into the caliper..
  • This set includes both right and left hand threaded rewind tools 2 pin fixed drives 17 adaptors which fit a variety of modern cars Complete with sturdy blow molded case for storage and ease of transportation.
  • This kit enables the rewinding of pistons back into the core on most disc brake calipers this allows you to service and replace worn brake pads on both wind back and push back type brakes.
  • Color: Gray Dimensions: (13.18 x 2.75 x 9.25)" / (33.5 x 7 x 23.5)cm (L x W x H) Weight: 88.89oz / 2.52kg Quantity: 21 Pcs Adaptable Car: Universal.
  • Package Includes: 1 x 21pcs Disc Brake Caliper Wind Back Tool Kit 1 x User's Manual.
Check Stock

Elite BMX Bicycle 18', 20' & 26' Model Freestyle Bike - 3 Piece Crank (Oil Slick, 20')

  • 18″ Specs: FRAME: Hi-tensile steel (” Toptube). FORK: Cr-Mo. HEADSET: 1 1/8″ Integrated sealed. STEM: Alloy (50mm reach). BARS: 4 Piece Cr-MO (8.75″ Rise). CRANKS: 3-Piece Cr-Mo Crank x 170mm. BOTTOM BRACKET: Sealed 48T Spline. PEDALS: Hi-Density Plastic Platform. SPROCKET: 25T. DRIVER: 9TBRAKE LEVER: Tektro Alloy. BRAKES: Tektro Alloy U-brake. TIRES: 18×2.4″.
  • 20″ Specs: FRAME: Hi-tensile steel (20.5″ Toptube). FORK: Cr-Mo. HEADSET: 1 1/8″ Integrated sealed. STEM: Alloy (50mm reach). BARS: 4 Piece Cr-MO (8.75″ Rise). CRANKS: 3-Piece Cr-Mo Crank x 170mm. BOTTOM BRACKET: Sealed 48T Spline. PEDALS: Hi-Density Plastic Platform. SPROCKET: 25T. DRIVER: 9T. BRAKE LEVER: Tektro Alloy. BRAKES: Tektro Alloy U-brake. WEIGHT: 26.2 lbs. TIRES: 20×2.4″.
  • 26″ Outlaw Specs: FRAME: Hi-Ten / Cr-Mo. FORK: Cr-Mo. HEADSET: 1 1/8″ Integrated sealed. STEM: Alloy (50mm reach). BARS: 2 Piece Cr-MO (8.75″ Rise). CRANKS: 3-Piece Cr-Mo Crank x 170mm. BOTTOM BRACKET: Sealed 48T Spline. PEDALS: Hi-Density Plastic Platform. SPROCKET: 25T. DRIVER: 9T. BRAKE LEVER: Tektro Alloy. BRAKES: Tektro Alloy U-brake. TIRES: 26×2.4″.
  • 26″ Outlaw 4130 Specs: FRAME: 4130 Cr-Mo. FORK: Cr-Mo. HEADSET: 1 1/8″ Integrated sealed. BARS: 4 Piece Cr-MO (....
Check Stock

MuHize Upgraded Brake Line Tubing Kit - 25 Ft. of 3/16 Copper Coated Flexible Tube, Roll 25 ft 3/16\ (Includes 16 Fittings)

  • PACKAGE INCLUDE - MuHize Brake Line Kit Replacement with 16 Fittings: ① 2 x 3/16” (7/16-24) Inverted Tube Nut.
  • ② 10 x 3/16" (3/8-24) Inverted Tube Nut.
  • ③ 2 x 3/16” (1/2-20) Inverted Tube Nut.
  • ④ 2 x 3/16"(9/16-18) Inverted Tube Nut.
  • SUPER EASY BENDING & FLARING - MuHize brake lines are easy to be bent with great flexibility by hand and flare by simple tools..
  • HIGHER QUALITY - MuHize brake lines are made with unique surface treatment. The lastest copper-coated brake line is better than standard steel tubing with corrosion resistance..
  • WIDELY APPLICATION - MuHize 3/16 brake line tubing kit commonly fits for Hydraulic Braking Systems, Fuel Systems, and Transmission Systems,etc. It is also widely fit for household, industrial and commercial uses..
  • PROFESSIONAL - MuHize focus on outstanding features and benefits of braking line. We promise that if the line is installed correctly out, the lines will extend the lifespan of the vehicle..
Check Stock