ReviewsXbee Adapter Board

Raspberry Pi 7 Touchscreen Display

  • This 7" Touchscreen display for the Raspberry Pi is perfect for creating portable and embedded projects where a keyboard and Mouse would be in the....
  • The full color display outputs up to 800 x 480 and features a capacitive touch sensing capable of detecting 10 fingers..
  • Only two connections from the Pi TO the Display are necessary.
  • power from GPIO (or USB) connection to the DSI port. The adapter board handles power,....
  • Kit contents: 7" Touchscreen display adapter board DSI ribbon cable 4 x stand-offs and screws 4 x jumper wires.
Check Stock

3DR 500MW Radio Telemetry Kit 915Mhz 915 Kit Air and Groud Data Transmit Module for APM2.6 APM2.8 PX4 Pixhawk

  • Upgraded version: From November 2021, data transmission will be upgraded from 100mw to 500mw. Support OTG of Android Cellphones,and computer OTG.....
  • 3DR telemetry 915mhz set for multiwii setting. PLUG AND PLAY. Pre-configered and tested to 115200 BAUD rate, and all other settings needed.
  • The 3DR Radio telemetry system is designed as an open source Xbee replacement radio set, offering a lower price, longer range and superior performance....
  • The radio is a 2-way half-duplex wireless communication system with a standard TTL UART interface, based on HopeRF's HM-TRP data link modules, and....
  • The SiK firmware includes a bootloader that permits radio firmware upgrades over the serial interface, and radio firmware with configurable....
Check Stock

Raspberry Pi 7\ Touch Screen Display

  • This 7" Touchscreen display for the Raspberry Pi is perfect for creating portable and embedded projects where a keyboard and Mouse would be in the way..
  • The full color display outputs up to 800 x 480 and features a capacitive touch sensing capable of detecting 10 fingers..
  • Only two connections from the Pi TO the Display are necessary.
  • power from GPIO (or USB) connection to the DSI port. The adapter board handles power, Signal conversion, and touch input conversion..
  • Kit contents: 7" Touchscreen display adapter board DSI ribbon cable 4 x stand-offs and screws 4 x jumper wires.
Check Stock

VSDISPLAY 7\ 7 Inch 1280x800 IPS LCD Screen N070ICG-LD1 with HD-MI VGA 2AV LCD Controller Board

  • 7" N070ICG-LD1 1280x800 LCD Screen: Resolution 1280RGB)×800 Outline Size 161 ×107×4.5 (H×V×D) Display Area 149.76 × 93.6 (H×V) Brightness 400 cd/m² (Typ.) Contrast Ratio 800:1 (Typ.) (TM).
  • Display Mode HS-IPS, Normally Black, Transmissive. Signal Interface LVDS (1 ch, 8-bit) , Connector , 39 pins..
  • HD-MI VGA 2AV LCD Board Work for LVDS Interface LCD Screen, 50Pin TTL Connector for 7inch~10.1inch LCD Screen.
  • Recommend Power Adapter Spec: Input Power Adapter:12Vdc More than 2A. (VSDISPLAY Power Adapter, AC 100-240V Input to 12V DC,2A Output ,Power Supply, US Plug , Fit SC24W-1202000U, Fit for All Types of VSDISPLAY LCD Controller Board) Come In Standby Model When Not Input Signal. Standby Model 003c1W.
  • Packing list : 1× HD-MI VGA+2AV LCD Controller Board VS-TY2662-V1 1× 7inch N070ICG-LD1 1280x800 LCD Screen 1× LVDS Cable 1× Keyboard With Cable(Help to notice , there is no power adpter in the packing list.).
Check Stock

UCTRONICS Fan Adapter Board for Raspberry Pi Upgraded Complete Enclosure and Raspberry Pi Cluster Case, Compatible with Raspberry Pi 3/3B+/4B, Output 5V Power

  • This fan adapter board is designed for Raspberry Pi desktop cluster cases and supports any Raspberry Pi motherboard with micro USB or USB C power..
  • With 4 pins on the adapter board, it can provide 5v power to two fans, which is the best way to power your fans when your Raspberry Pi GPIO is occupied by the PoE hat and keep your device cool at all times..
  • Plug and play: The fan adapter fits any 5V fans with an XH2.54 duplex connector. Simply plug the red wire of the fan connector into the positive and the black wire into the negative to run. Size:0.51*0.59 inch..
  • Compatible ASIN List: Raspberry Pi Complete Enclosure: B09JNHKL2N, B09S11Q684.
  • Raspberry Pi Cluster Case: B099RR1ZCT, B09K439BTY all are suitable for this fan adapter..
Check Stock

Gold Plated Airplane Flight Headphone Adapters (Pack of 2) | Allows you to use your Earphones with all In-Flight Media Systems | This Airline Plane Headset Converter Enables Great Sound on all Planes

  • ✅ The headphones dual adapter is versatile and functional since this audio cable adapter airplane is used as CONVERTER for your EARPHONES to let you CONNECT your own HEADSET to the IN-FLIGHT ENTERTAINMENT SYSTEM while on board. These flight adapters separate R and L sound channel and will make your trip more enjoyable because this headphone jack adapter airplane enables perfect audio quality for both music and movies. Quality wise, this headphone jack for airplane will never let you down..
  • ✅ Do you want to USE YOUR OWN HEADSET IN FLIGHT but the audio sockets does not match? These AIRPLANE AUDIO CONVERTERS from Mobi Lock are perfect solution for you. These airline headphone socket adaptors is a functional audio adapter for airplanes and are designed with smaller rounded base to fit the 2-prong airline jack. Since MOST AIRCRAFTS DO NOT ACCEPT the standard headphone plug, YOU NEED an AIRLINE AUDIO ADAPTER and the two female headphone adapter to make your earpieces fit perfectly!.
  • ✅ This headphone jack adapter has gold-plated sockets and the earphone headphone adaptor will provide you with perfect sound transfer. This adapter plug and double headphone plug CONVERT....
Check Stock

VSDISPLAY HD-MI Audio LCD Controller Board Work for 14.1 15.4 inch 1280x800 b154ew01 b154ew02 lp154w01 ltn154at07 ltn154x3-l01 lp154wx4 LTN140W2-L01 LVDS 30 Pin Interface 1CCFL Backlight LCD Screen

  • Not list all of compatible panel.it must to confirm your screen is a 14.1" or 15.4" resolution 1280x800, the backlight type is 1CCFL, and the LVDS....
  • Compatible with : LTN141AT01 LTN141AT02 LTN141AT03 LTN141AT07 LTN141AT10 LTN141AT13 LTN141AT14 LP141WX3 LT141WX1 B141EW01 B141EW02 B141EW03 B141EW04....
  • Recommend :Power Adapter Power Adapter 12Vdc more than 2A 5.5mmx2.1mm Connector. Or go to "VSDISPLAY "store to get "VSDISPLAY Power Adapter, AC....
  • Help to notice there is no power adapter in the packing list . Follow the user manuel and the picture on this page to connect and use the board..
  • Packing list : 1× HDMI LCD Controller Board VS-TY2660H-V1 1× 1CCFL Inverter Board 1× 30Pin Signal Cable 1× Keyboard With Cable 1× Remote....
Check Stock

Voilamart LED Message Writing Board, 32" x 24" Flashing Illuminated Erasable LED Message Chalkboard Neon Effect Menu Sign Board with Remote Control, 8 Colors Chalk Markers

  • [PREMIUM QUALITY] This LED message writing board consists of explosion-proof, anti-scratch, reinforced glass and safe & environmental-friendly accessories (8 Chalk markers with MSDS certification, US power adapter with FCC UL certification).
  • [VERSATILE USE] At daylight, present your business menu with colorful chalk markers in a energy-saving way.
  • at night, display your message in a vivid and eye-catching way with the 16 colors and 4 various flashing modes Flash/Strobe/Fade/Smooth..
  • [BATTERY & AC ADAPTER SUPPLY] You can place the large led flashing writing board anywhere without worrying the power supply. The Dry Erase LED Board can be not only plugged in to supply electricity, and also be operated by the BATTERY..
  • [EASY TO USE & CONVENIENT] No assembly required, ready to go right out of the box, you can easily write message on this led chalkboard with the BONUS 8 colors fluorescent pens, wipe off with a damped cloth, plus the USB connector, hang horizontally or vertically, great for DIY.
  • ATTENTION GETTER: Perfect for business promotion and attracting attention. This neon message board is a good replacement for regular chalkboards, teaching boards, party decor, electronic message board, light up whiteboards, wedding decorative boards, digital signs ....
Check Stock

Vilros BBC Micro:bit Breadboard Adapter/Expansion Board

  • Vilros BBC Micro:bit Breadboard Adapter/Expansion Board.
  • Make wiring your microbit a breeze with the T-Shaped Breakout board that conveniently plugs into your breadboard..
  • Important: Breakout Board Only-Does NOT include A BBC Microbit.
Check Stock

Wii Fit Fitness Journal

  • Balance Board Step cups: Rubber lined cups for stability on many surfaces, Raises the balance board 4 inches from the ground.
  • Exercise speedometer adapter: Detects the speed in miles/kilometers of your swings, Measures the calories lost during your exercise,.
  • Xertube Resistance band: Elastic strap comes with two nylon straps and Stretchable and durable for ActiveTspecific workouts.
  • Yoga mat: Soft, plastic, non-slip Mat, firm support for the Wii Balance board.
  • Water Bottle: Screw top and made of Eco-friendly recyclable material.
Check Stock

IDE to SATA Adapter, Upgrade PCB Hard Drive or Optical Drive Adapter Converter Kit for Sony PS2, IDE Original Network Adapter for Game, Purple

  • ★★【SPECIFICATION】❶Item Type: Adapter❷Material: for PCB❸Color: Purple❹Weight: Approx. 13.0g/0.5oz❺Application: Sony PS2 IDE original network adapter..
  • ★★【SUITABLE FOR SONY PS2】Precise cut, perfect fitness, suitable for Sony PS2 IDE original network adapter..
  • ★★【SATA HARD DISK】A large‑capacity for sata hard disk is used to replace the IDE hard disk to play the game, which will save us a lot of game loading time..
  • ★★【PCB BOARD MATERIAL】High‑quality for PCB board material, with fast operation speed and excellent performance..
  • ★★【EASY TO INSTALL】Equipped with mounting screw pack, which makes it easy to install and detach.Small and lightweight, convenient for us to storage and a good replcement accessory..
Check Stock