ReviewsXlpe Insulation Cable

Electric Water Pipe Heating Cable with Thermostat for Pipe Freeze Protection, 6ft 120V Snow De-Icing Cable with Build in Thermostat, Pipe Warmer, Heat Pipe Tape - CSA/ETL Listed

✅ 003cb003e[100% Money-Back Guarantee] 003c/b003e--Customer satisfaction is our priority. If for any reason you're not completely satisfied, you can ask for a replacement or full refund, no questions asked. Buy with confidence!.
✅ [High quality]--UL, ETL and CSA certified,more safer to use.Industrial grade heat shrinkage tube for connection.Each Cable consists of tough XLPE inner insulation, AL foil, a continuous ground braid as well as weather and non-supportive climatic conditions resistant PVC (high-low temperature) outer coating. Can convert 100% of electrical energy into heat without energy loss..
✅ [Note]--Maximum 1/2 in fiberglass insulation was used over the heating cable for lower temperature protection. Pipes must be at least 3 feet and at least 3/8'' and less than 1 1/2'' in. diameter. No crossing. No spiral. No overlap itself. Only straight. If the ambient temperature is lower than -20°F(-29°C), please use 1" thick insulation material..
✅ [Application]--Suitable for use on water filled plastic ((including PEX)and metal water pipes(including copper, galvanized, ABS plastic, PVC plastic pipes, etc).Not use for empty water pipes, fuel lines, hoses, gutters, steam lines and so on.Keeps water flowing down to -40℃..

2 AWG cable. Please refer to the photo gallery for a technical specification chart (amperage, voltage, stranding, insulation and copper thickness, etc.).
High grade EPDM insulation jacket: Resistant to tears, cuts, abrasion, water moisture, and oil based solvents.
High stranding cable count combined with EPDM insulation results in a very flexible cable.
Rated up to 600 volts, -50°C to +105°C (-58°F to +221°F). Pure copper cable. Copper cable is fully annealed per ASTM standards.
Made in the USA. Copper cable is fully annealed per ASTM standards. Complies with SAE J1127. IEC and RoHS compliant.

2 AWG cable. Please refer to the photo gallery for a technical specification chart (amperage, voltage, stranding, insulation and copper thickness, etc.).
High grade EPDM insulation jacket: Resistant to tears, cuts, abrasion, water moisture, and oil based solvents.
High stranding cable count combined with EPDM insulation results in a very flexible cable.
Rated up to 600 volts, -50°C to +105°C (-58°F to +221°F). Pure copper cable. Copper cable is fully annealed per ASTM standards.
Made in the USA. Complies with SAE J1127. IEC and RoHS compliant.

Please refer to the photo gallery for a technical specification chart (amperage, voltage, stranding, insulation and copper thickness, etc.).
High grade EPDM insulation jacket: Resistant to tears, cuts, abrasion, water moisture, and oil based solvents.
High stranding cable count combined with EPDM insulation results in a very flexible cable.
Pure copper cable. Copper cable is fully annealed per ASTM standards.

2 AWG (2 Gauge) Cable. Please refer to the photo gallery for a technical specification chart (amperage, voltage, stranding, insulation and copper thickness, etc.).
High grade EPDM insulation jacket: Resistant to tears, cuts, abrasion, water moisture, and oil based solvents.
High stranding cable count combined with EPDM insulation results in a very flexible cable.
Pure copper cable. Copper cable is fully annealed per ASTM standards.

Included Items: Pure Copper Cable (select cable gauge, insulation color and length using the selection tabs) + 5pcs 5/16" STUD Copper Cable Lugs + 5pcs 3/8" STUD Copper Cable Lugs + 3 Feet Black Heat Shrink Tubing. Save time and money by purchasing all components in one product listing..
Made in the USA WindyNation Power Flex Cable is an ultra flexible PURE copper cable manufactured with a tough, solvent resistant EPDM insulation jacket. PLEASE SEE THE PHOTO GALLERY FOR A CABLE SPECIFICATION CHART (amperage, voltage, stranding, insulation and copper thickness, etc.).
Copper cable is SAE J1127 approved and uses annealed copper strands per ASTM standards.
Copper Cable Lug Description: pure copper with an exterior tin coating for corrosion protection (excellent for outdoor and marine applications). Cable lug utilizes a closed end design to protect cable from outdoor environment (i.e. moisture, acid, and solvents). Cable lug can be crimped or soldered. Flared barrel end design for easy entry of cable into the cable lug..
Heat Shrink Tubing Description: 600 volts, operating temperature -55 Celsius to +125 Celsius, resistant to most solvents and fire resistant (polyolefin material), black in color with no printing on tube. PLEASE SEE PHOTO GALLERY FOR A D....

Please refer to the photo gallery for a technical specification chart (amperage, voltage, stranding, insulation and copper thickness, etc.).
High grade EPDM insulation jacket: Resistant to tears, cuts, abrasion, water moisture, and oil based solvents.
High stranding cable count combined with EPDM insulation results in a very flexible cable.
Pure copper cable. Copper cable is fully annealed per ASTM standards.

Please refer to the photo gallery for a technical specification chart (amperage, voltage, stranding, insulation and copper thickness, etc.).
High grade EPDM insulation jacket: Resistant to tears, cuts, abrasion, water moisture, and oil based solvents.
High stranding cable count combined with EPDM insulation results in a very flexible cable.
Pure copper cable. Copper cable is fully annealed per ASTM standards.

4 AWG (4 Gauge) cable. Please refer to the photo gallery for a technical specification chart (amperage, voltage, stranding, insulation and copper thickness, etc.).
High grade EPDM insulation jacket: Resistant to tears, cuts, abrasion, water moisture, and oil based solvents.
High stranding cable count combined with EPDM insulation results in a very flexible cable.
Rated up to 600 volts, -50°C to +105°C (-58°F to +221°F). Pure copper cable. Copper cable is fully annealed per ASTM standards.
Made in the USA. Complies with SAE J1127. IEC and RoHS compliant..

4 AWG (4 Gauge) cable. Please refer to the photo gallery for a technical specification chart (amperage, voltage, stranding, insulation and copper thickness, etc.).
High grade EPDM insulation jacket: Resistant to tears, cuts, abrasion, water moisture, and oil based solvents.
High stranding cable count combined with EPDM insulation results in a very flexible cable.
Rated up to 600 volts, -50°C to +105°C (-58°F to +221°F). Pure copper cable. Copper cable is fully annealed per ASTM standards.
Made in the USA. Complies with SAE J1127. IEC and RoHS compliant..