ReviewsXps Foam Board Extruder

DOMINOX Foam Cutter Electric Styrofoam Hot Knife Kit Foam Board Cutter Foam Cutting Tool Heated Knife for Foam Board Insulation, Kaizen Foam, EPP, EPS, XPS, EVA, EPE, PU, KT Board, Sponge, Nylon

...or short-time use occasions with small workload. Foam Cutter usually used for packaging, construction, pitched roof insulation, external wall insulation composite system. For professionals, craftsmen or DIY enthusiasts to provide better help in commercial and industrial use. Foam Cutter can cut lightweight foam, KT board, polyurethane, polyethylene, EPS, XPS, EPP, EVA, EPE, PU, polyester foam, sponge, rubber, nylon and fiber, etc..
【SMOOTH OPERATION】: There is a pure copper induction coil inside the Upholstery Foam Cutter, which adopts innovative circuit design to heat fast and evenly. Upholstery Foam cutter can give you the same experience as cutting butter and bread with a knife. The cutting process is very smooth, and the cutting effect is flat and perfect..
【ADJUSTABLE TEMPERATURE】: The adjustment knob on the top of the Styrofoam Cutter has 16 positions to adjust temperature and power. The wide adjustment range can meet the needs of most industries and jobs. The wider the scale on the knob, the greater the power and heat. If you can't master the temperature control temporarily, we suggest you practice several times on the foam waste (NOTICE: If the red light flashes after pressing the switch, push the adjustment knob forward to increase)..

Check Stock

Creality Official Upgrade Extruder MK8 Extruder Alloy Block Bowden Extruder 1.75mm Filament for Ender 3 Series Ender 5/5 Plus/Pro CR-10 Series 3D Printer

COMPATIBILITY--- All Metal MK-8 Extruder Feeder Drive 1.75mm Filament. It makes loading the filament easier and smoother, with no worries about....
UPGRADE METAL EXTRUDER---The upgrade Creality3D silver metal Bowden extruder is an update for the plastic extruder. Upgrade your Creality 3D Printer....
WORK BETTER--- the extruder drive has better stronger pressure pushing the filament into the printer nozzle and so will improve the printers'....
EASY TO ASSEMBLE--- Our metal extruder kit includes all the necessary screws & parts needed, it can directly replace your old original fragile plastic....
OFFICIAL HIGH QUALITY--- Full metal aluminum alloy material makes our extruder kit more stable and durable. And it has stronger pressure pushing the....

Check Stock

Official Creality 3D Extruder Feeder Drive MK-8 Aluminum Upgraded 1.75mm for CR-10 Ender 3 CR-10S (Black)

【Upgrade Black Extruder】All Metal MK-8 Extruder Feeder Drive 1.75mm Filament. It makes loading the filament easier and smoother, with no worries about filament scraping or breaking. This extruder feeder drive is compatible with nearly all models of 3D printers. No need to change stepper motors or other mounting hardware..
【Wide Application】The upgrade Creality3D silver metal Bowden extruder is compatible with nearly all models of 3D printers(Ender 3/3 Pro, Ender 3 V2, Ender 3 Max, Ender 5/5 Plus/5 Pro, CR-10, CR-10 V2, CR-10 Max, CR-10 S4, CR-10 S5, CR-10S, CR-10 Plus, CR-X, CR 20/20 Pro). No need to change stepper motors or other mounting hardware..
【Very Easy to Install】 Unbolt the old original Creality plastic extruder & screw in the new Metal Extruder and ready to start printing. Our metal extruder kit comes with an instruction on how to put it together, which makes it easier to install. Used for 1.75mm filament of 3D printer MK8 Bowden extruder frame.
【Durable】 All-metal aluminum alloy, DIY aluminum block and you need to be assembled by yourself. Giving a much smoother travel and print quality. Fits a 1.75mm filament..
【Official Creality Original Quality】This high-quality all-aluminum construction is guaranteed to last for years,....

Check Stock

Bowden Extruder V2.1 RNC Nano Coated Gear DDB Universal Geared Extruder for 3D Printer

Kit includes: 1pc Universal Geared Extruder w/ RNC Nano Coated Gear, 1pc Screws package, 1pc Installation tools package, 1pc Stepper motor mounting bracket.
Upgraded High performance extruder for 3D Printer.
Upgrade Highlights: 1. The position of the gears and the accuracy of all screw holes are calibrated. 2. Modified the new buckle, both sides of the V2.1 version of the DDB extruder support filament running thru in and out (it has no specified direction, and you are able to use either side of the material ports).
3. The filament has an independent motion cabin inside the extruder. The new white filament guide inside the extruder is helping the filament running smoothly. 4. The new outer shell design with edge cut on the top of the extruder is reserved for the screw rod of Ender 3 printer. 5. Upgraded shell using new mixed materials.
***Please make sure Gears are Installed and Precisely Aligned before printing, they will perform successfully.

Check Stock

Raise3D 101016001 Pro2 3D Printer Dual Extruder Fully Enclosed

Dual Extruder Electronic driven lifting 4× increased torque performance Diverse Filament Compatibility (300℃).
Huge Build Volume (12*12*11 8 in) Minimum 0 01mm Layer Height.
7" Touch Screen Resume Print after Power Outage Wireless Compatibility.

Check Stock

Official 3D Printer Extruder Upgraded Aluminum Drive Feed Extruders Accessories for 3D Printer 1.75mm Filament Works with Creality CR-10 Series Ender 5 Series Ender 3 Series

✔️Durable Material -- High quality aluminum alloy material and sandblast to surface oxidization, ensuring this red extruder is last for long term....
✔️New Upgraded Design -- The upgraded red extruder has removed pneumatic joint so as to increase gear density, preventing the joint fracture....
✔️Improved Performance -- The optimized extruder with metal extrusion and original hot-end kit pushes the filament into printer nozzle, greatly....
✔️Install Easily -- You just remove the old Creality extruder & screw and then install the new red extruder. All the necessary accessories are....
✔️Wide Compatibility -- Red extruder is suitable for Creality 3d printers accessories: Ender-3 series, Ender-5 series, CR-10S, CR-10, CR-10mini,....

Check Stock

5Aplusreprap Upgraded Dual Gear Extruder Single Connector for Creality Ender 3 CR10 / Pro CR-10S 3D Printer 1.75mm Filament (2 x Extra Gears), Right Hand

Package Include: Single connector upgraded dual gear extruder right-handed 1 Set - extruder aluminum block DIY kit with 4pcs quality stainless steel gears.
Main Material Instruction: Material for extruder: Aluminum Alloy . Material for the gear in extruder kit : Stainless Steel. For filament: 1.75mm.
Advantages: This is an upgraded version of CR10 extruder. A newly added extrusion wheel makes the filament feed more stable. The design of the double-concave gear also reduces the embossing of the consumables by the extrusion wheel..
Features: The mould steel spring is very rigid, strong in pressure and very durable..
Tips: For most Ender/CR Series 3D Printers, please choose the right-handed extruder..

Check Stock

Redrex Ender 3 Extruder Bowden Aluminum Upgraded with 40 Teeth MK8 Drive Gear Kit Compatible with Creality Ender 3V2 /Ender 3 Pro/CR-10 Series and Other Reprap Prusa 3D Printers [Right Hand]

【Application】:This metal extruder is compatible with Creality Ender 3 V2,Ender 3 Pro,Ender 3,CR-10,CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10....
【Direct Drive Extruder】:The upgrade extruder supports direct extrusion.A direct drive extruder improves extrusion and retraction by removing the....
【Filament】：The extruder feeder supports PLA/ABS/Wood/Hips/Flexible/PTEG,with 40 teeth drive gear feeds the 1.75mm filament very smoothy..
【Durable Feeder】:The extruder feeder is made of heavy-duty aluminum alloy material,which is more durable and stable than the plastic one..

Check Stock

Geeetech A10M 3D Printer with Mix-Color Printing Adjustable Dual Extruder Design Filament Detector and Break-resuming Function Updated 3mm Hotbed Kit,Prusa I3 Quick Assembly DIY kit.

✔️【Unique Double Color Printing】2 extruder module and 2-in-1-out hot end, which deliver 4 types of printings--Single color, Double color,....
✔️【20 Minutes Self-Assembly】The modularized design divided the printer into 6 modules--Gantry kit, Bottom kit, Extruder motors, PSU kit, LCD....
✔️【GT2560 V4.1b Marlin Control Board】Using Marlin firmware, stable and easy to operate. It will support auto-leveling function. All what you....
✔️【Filament Detector and Break-Resume】The filament detection system will alert you to change filament when the printer runs in air or the....
✔️【After-sale Services】Our products have strict quality inspection test before leaving the factory,and if you have any problem with this....

Check Stock

FloraCraft Heated Tool CleanKut Foam Cutter

This package includes one CleanKut Foam Cutter and one metal stand..
Easily cut XPS or EPS foam into intricate shapes with no mess..
Thin, wand-style blade is great for piercing into foam to create center cut-outs..
Tool plugs into any standard USB adapter (not included) and comes with a convenient, metal stand to safely rest the tool on a work surface..

Check Stock

Artillery Sidewinder SW-X2 3D Printer Latest Model Ultra-Quiet Printing 300x300x400mm Automatic Leveling Power Failure Recovery 95% pre-Assembled 110V-220V Free Switching

The print speed can reach up to 150 mm/s, and with the Direct Drive Extruder, makes high quality print, especially for flexible filament. When it....
The printer has a direct drive extruder and a fast heating AC heat bed with built in thermal runaway protection, even if the board or the SSR....
There are 3 inductive sensor end stop separately set on XYZ axis while those non-touch, high-precision limit switches can automatically calibrate and....
SW-X2 will save you from the loss of power. When it recover from a power failure, the machine will continue to print. Also, it will automatically....
With a 300 x 300 x 400 mm build volume, the Sidewinder X2 3D printer has a hushed operating sound even working at fast speeds, thanks to its exclusive....

Check Stock