ReviewsYag300w Laser Cutting Machine

SCULPFUN S30 Pro Laser Engraver with Auto-Controlled Air Assist System, 84W Laser Engraving Cutting Machine, 10W Optical Power Laser Cutter for Home Family DIY, Ultra-Thin Carving (S30 Pro Engraver)

  • ...trolled during engraving, and the engraved pattern will be smoked into a fuzzy fog. The S30 Pro is equipped with an air assist 32-bit motherboard and a control-type air pump, which can intelligently control the air-assist switch during engraving through the LightBurn software M8 button, this makes the engraving and cutting very clean, and makes the finished works more high-quality..
  • ▶【Built-in High Pressure Air Assist Nozzle】 - S30 Pro laser cutting machine is equipped with advanced high-pressure air-assisted metal nozzle, which can generate high-pressure airflow under the air pump, greatly improving the cutting efficiency, and the cutting speed is more than 5 times faster than that without air assistance. The powerful airflow blows away the residue, making the cut surface very clean and smoothy..
  • ▶【High Precision Ultra-thin Linear Rail Engraving】 - S30 Pro laser engraver adopts ultra-thin laser shaping technology, the laser focus is as thin as hair, very powerful for engraving. Besides, the carving machine adopts the most accurate 0.005mm industrial linear guide, which greatly improves the engraving accuracy, and there is no wave line when engraving. When comparing small cutting details, the S30 does not have the wavy pattern that appears ....
Check Stock

Woodworking Cutting Machine Set, Firm Clamping 63mm Blada Diameter Table Saw Sliding Rail Design Mini 6000r/min for Wood Aluminum(#2)

  • [UPGRADED MOTOR]: The 6T table saw has an upgraded 885-type high-torque motor with a power of 300W, a speed of up to 13000rpm, ultra-high cutting force and low noise interference.It is equipped with 7-level adjustable speed power supply, which can adapt to different cutting speeds by adjusting the speed. Attached English manual, which is clearly explained and detailed for your reference..
  • [ACCURACY & SAFETY]: Equipped with a straightedge, a miter gauge and a laser scale plate, which can realize high-precision and multi-angle cutting. 1. The integrated steel frame structure and the thickened 5mm aluminum alloy table top are durable enough, ensuring a smooth cutting surface and excellent cutting effect. 2. The transparent baffle meets the cutting safety, and the rubber feet at the four corners of the bottom are non-slip and shock-absorbing..
  • [LIFTABLE SAW BLADE]: The 110mm(4-23/64in) special alloy saw blade can be raised and lowered by adjusting the screw hole on the table. The cutting depth is within the range of 0-29mm(1-9/64in), allowing you to explore more possibilities in the DIY process!.
  • [APPLICATIONS]: Compact size of 9.45*7.87*5.12”, weight about 4kg, portable and suitable for home or portable use. With accessories of different groups, which ca....
Check Stock

Comgrow Laser Engraving Machine for Dog Tag Metal Wood Silicone,Portable Desktop Laser Engraver Machine Tumblers Leather Glass Acrylic

  • ... BLUETOOTH】Do not know how to control our app and machine? we have detail user guide in APP to help you enjoy the laser engraving tool.It has the functions of text editing, photography, photo album, material library, eraser and manual resizing. Engraving mode: bitmap engraving, bitmap grayscale engraving, contour cutting, black and white image, grayscale image, stamp. Operating system: Windows, Android, iOS (computer software can be compatible with Mac OS).
  • 【STRONG COMPACT LASER ENGRAVING CUTTING MACHINE】 1600mw German OSRAM unique laser chip Mini laser Carving Tool for metal cups. The output power of the laser head is stable and can work continuously for more than 10,000 hours. The engraving depth reaches 2mm, the engraving range: 3.8“*3.4“, the laser engraving range: 30mm-80mm, and the engraving resolution: 508dpi. Engraving materials include: cardboard, wood, leather, cloth, bamboo, plastic, acrylic, cut 1mm wood (Note: acrylic, glass, ceramic and transparent or translucent stuff can not be engraved. You need to use the included black marker to blacken the object, or you can buy our laser engraved colored paper ASIN:B09H44ZFVJ）.
  • 【EXCELLENT SAFETY PROTECTION】The pet tag engraver machine will stop working if the engraving cutting machi....
Check Stock

ATEZR P10 Combo 60W Laser Engraver with Air Assist& Rotary Roller, 430 * 430mm Working Area, 10W Laser Power CNC Laser Engraver for PC/Mobile, Hypersonic Laser for Wood/Metal/Acrylic etc.

  • ... Laser Technology】ATEZR P10 60w Laser Engraver has 10W laser output power. The laser focus area is reduced to 0.08*0.06mm, which can cut 10mm wood board and 6mm black acrylic at one time.ATEZR P10 laser cutter can cut up to 18mm wood board and 30mm acrylic board. It can combine precision engraving and high energy cutting. The working life of the laser module can reach 30,000+ hours.
  • 【Multiple Connection Modes】ATZER laser cutting machine has 4 connection modes. You can not only connect to PC, mobile phone/tablet APP, but also connect to touch screen and WLAN. You can download APP from App Store/Google Play Store and use your mobile device to take photos and upload to APP directly to start engraving. ATZER laser cutting and engraving machine will bring you a new DIY control experience.
  • 【Customer Service】We will provide you with a 30-day no-questions-asked money-back guarantee, 2-year warranty for quality issues and lifetime technical support for your Atezr products. You can always contact our support team for a fast and effective solution. Customer service is available 24/7 online.
Check Stock

Laser Engraver Cutting Module, LASER TREE 10W Output Optical Power Diode Laser Head, Double Ultra-Fine Compressed Spot Laser Cutter Module with Air Assistance, Laser Engraver for Wood and Metal, 24V

  • ...ine power and 10W output power, 0.08*0.08mm compressed spot enabling finer laser engraving. The laser module engraves 304 stainless steel up to 300mm/s at a 45mm focus length. And laser cutter module ability to cut through 8mm thickness plywood by one pass at speed of 1.5mm/s. Excellent engraving speed & remarkable cutting ability for a better cutting/engraving experience..
  • AIR ASSIST & EYE PROTECTION MODES – AIR ASSIST Mode: LT-80W-AA laser engraver module is equipped with an air assist metal nozzle that can make material edges cleaner when cutting/engraving. That will greatly reduce burned marks and bring you an excellent cutting experience. (Note: Air-assisted pump not included) Mode 2: This laser module comes with a detachable eye protection cover. When engraving with this laser head, you could use this protective cover that can effectively filter blue light..
  • ULTRA-LONG SERVICE TIME – The main part is made of aluminum alloy to make the module structure more solid. And this laser cutter engraver module built-in fan cooling system, a fan speed of 10000 rpm, and cools efficiently to prolong service life. Original diode, high quality, lifetime up to 20,000 hours. Engraving module kit protective lens can have no fingerprints, it will affect the cut....
Check Stock

CNC Wheel Router Rotary Axis Attachment for CO2 Laser Rotate Engraving Cutting Engraver Attachment Machine 2 Phase Stepper Motor for Laser Engraving Cylindrical Objects, Wine Glass, DIY Kettle, Ring

  • 【PERFECT ATTACHMENT FOR LASER CUTTING MACHINE】laser rotary attachment sold steel structure with 0.01mm motion accuracy and 0.08*0.08mm compression point, the maximum vector engraving speed can reach 360°/s, ensuring ultra-fine lines in high-resolution engraved images. Get the best project for you without missing any details..
  • 【ENGRAVING ROUND SURFACES】This four-wheel laser rotary shaft attachment works with most laser engravers, allowing you to engrave 360° on cylindrical objects such as Christmas glasses, DIY bottles, personalized wine glasses, pipe piping, and more. Unleash your creativity on almost any cylindrical object..
  • 【DOUBLE COMPASSES STRUCTURE】rotary attachment circular rail structure is adopted, and the bilateral fixed support is more stable and rigid.
  • the attachment of the rotary cutting machine can be adjusted up and down according to the demand, suitable for 2-14 inches long and 0.4-6 inches in diameter..
  • 【EASY TO USE AND INSTALL】You just need to connect the 4-wire connection cable of this rotary tool to the dedicated port on the laser engraver and configure the settings in the software to st....
Check Stock

Electric Micro Engraver Pen USB Rechargable Engraving Machines With 36 Bits,Portable Mini Engraver Tools, Cordless Rotary Tools Engraved Jewelry Glass Stone Wood Plastic Metal DIY

  • ▶【Diode Spot Compression Laser】- The S6 Pro laser engraver uses the latest 5.5W diode spot compression laser, which has an ultra-fine square 0.08mm laser focus. With twice cutting penetration and accuracy of ordinary lasers, It can cut 10mm thick wooden boards with high-energy and engrave aluminum oxide, painted metal and ceramic..
  • ▶【Fast Focusing and Sturdy Structure】- With fixed focus lens and sliding design, you only need to slide the laser and tighten the screw to complete fast focusing of the laser cutter machine. The X and Y-axis contain precise scale lines, which is convenient for you to measure the size of engraving objects..
  • ▶【Eye Protection Designs】- The laser filter cover of the metal engraving machine filters 98% of the uv light, allows you to watch the engraving without wearing goggles and prevents your pet from grabing the laser spot. There is a power switch on the machine for emergency power off. The A4 size steel pad can well protect your table from laser damage..
  • ▶【Easy and Fast to Assemble】- The all-metal structure design makes the desktop laser etching machine more solid, steady and durable. There are reserved fixing holes on the the four feet and the body for fixing the machine and the data cable. It is easy t....
Check Stock

xTool M1 10w Compact 3-in-1 Laser Engraver & Cutting Machine with Rotary & Material Box, Higher Accuracy & Smarter 16MP Auto-Focus, Create Christmas DIY Wood/Metal/Paper/Acrylic/Iron-on/Vinyl

  • 3-IN-1 INNOVATION: World's first desktop hybrid laser & blade cutting machine that is perfect for gift-making. xTool M1 integrates Laser Engraving, Laser Cutting and Blade Cutting into one, allowing you to do way more with a super wide range of materials.
  • 300+ MATERIALS SUPPORTED: xTool M1 can cut or engrave 300+ materials including Vinyl/Metal/Leather/Wood/Paper/PVC/Fabric/Iron-on/Cardboard/Felt/Ceramics/Plastic. You can use the blade head to cut vinyl to avoid burnt edge, discoloration and unhealthy fumes.
  • POWERFUL, FAST & ACCURATE: Adopting dual laser technology, xTool M1 laser engraver achieves True 10W output power, capable of cutting a 10mm wood in one pass. Compressed spot technology with a FAC lens achieved ultra-fine 0.01mm Engraving precision at a speed up to 15000mm/min.
  • SMART & 3 STEPS TO START: Equipped with a 16MP high resolution camera inside, xTool M1 can initiate auto-focusing, realize visual processing, and get creations in just 3 simple steps. It also can extract images, designs, and drawings for further creative design and do batch processing with the AI system..
  • SAFELY & ENVIRONMENT-FRIENDLY: Class I(FDA Certificated) safety rating. The viewing cover can filter blue light to protect your eyes. A built-in fan with exhaust pipe quickly....
Check Stock

xTool D1 Laser Engraver with Rotary & Material Box, 10W Higher Accuracy Laser Cutter, 60W Laser Cutting Machine, Laser Cutter and Engraver Machine, Laser Engraver for Wood and Metal, 17'' x 16''

  • You May Be Wondering - 10W is laser output power, which measures the capability of the machine to cut and 60W is the machine power of the laser machine.
  • Fulfill Your Imagination with One Pass - xTool D1 works well on cutting a 10mm wood board and a 5mm black acrylic in one pass, smoothly cutting surface with fewer burn marks.
  • All-Metal Made - The all-steel wheel, shaft, and enclosed synchronous belt make the xTool D1 laser engraver more stable with less noise and 3 lifetimes longer than similar products.
  • Higher Accuracy - xTool D1 laser cutter adopts a 0.08mm*0.06mm ultra-fine compression spot, achieving detailed and vivid engraving images.
  • Wide Compatibility - xTool D1 supports LightBurn and xTool Creative Space software (Newly upgraded). You can transfer data via Wi-Fi, USB cable, and TF card to use the laser engraver.
  • Turn Your Imagination Into Creativity - xTool D1 10W is suitable for more professional creators, like carpenters, craftsmen, artists, designers, practitioners of science and technology education and more.
  • All-in-One Kit - Rotary Attachment and Material Box are also provided, with which you can start your creation quickly with the xTool D1 laser engraver and cutting machine.
  • Eye Protection Design - The anti-UV filter acrylic on the laser mod....
Check Stock

SCULPFUN S30 Laser Engraver with Auto Air Assist Pump & Nozzle, Limit Switchs, 5W CNC Laser Cutter, Industrial Grade Accuracy Engraving Machine, 10 Times Longer Laser Service Life

  • ...eds to be manually turned off when engraving, otherwise it will destroy the engraving pattern or text. The S30 series comes standard with a 32-bit air-assist motherboard and automatic air pump, which can be turned on/off intelligently(air assist turns off automatically when engraving and turns on automatically when cutting). Save the time and trouble of doing it manually or avoid bad engraving due to mistakes..
  • Powerful 5W Dual Laser Output: The S30 laser cutting machine combines 2 high-density, sharp laser beams into 1 to cut 5mm balsa wood and 3mm plywood in 1 pass. With high-pressure airflow from the air-assisted nozzle dramatically increases cutting efficiency, cutting more than 5 times faster than without air assist..
  • Higher Precision Engraving & Cutting: S30 series laser engraving machine adopts extremely sturdy 0.005mm high precision linear slide rail X-axis, and a 0.08mm x 0.06mm ultra-fine compressed spot, making it reach industrial grade engraving accuracy. Achieve detailed and realistic engraved images ..
  • Smooth Edge & Deeper Cutting: Use air to quickly reduce the surface temperature of the cut object to ....
Check Stock

xTool D1 Pro Upgraded Laser Engraver, 10W Output Power DIY Laser Cutter, 60W Higher Accuracy Laser Engraving Machine, Laser Engraver for Wood and Metal, Paper, Fabric, Acrylic (RED)

  • You May Be Wondering: 10W is laser output power, which figures measure the machine's capability to cut and 60W is the machine power of the laser machine..
  • Professional Support: A professional team on standby to reply and solve your after-sales problems as soon as possible.Contact us when you have questions..
  • Powerful 10W Dual Laser Output: Combining 2 laser beams into 1, xTool D1 Pro laser engraving machine is capable of cutting a 10mm wood board and a 5mm black acrylic board in ONE PASS..
  • Higher Accuracy Engraving and Cutting: xTool D1 PRO laser cutter adopts a 0.08mm*0.06mm ultra-fine compression spot, resulting in detailed and vivid engraving images..
  • Newly upgraded xTool Creative Space software: Easy to start DIY with FREE sample projects, unlimited use of 500+ elements, 30+ fonts, and default parameters for common materials..
Check Stock