ReviewsZ Wave Controller

ZRC-90US, BW8510US, by Remotec, Cert ID: ZC10-15100007

  • ...AL is present. Wire it just like the ZEN21/ZEN71 models. Please follow the appropriate diagram in the manual and rewire both boxes exactly as shown. Works great as a single pole switch too!.
  • Z-WAVE HUB COMPATIBILITY: Most basic Z-Wave systems aren't advanced enough to allow scene control programming. The ZEN32 Scene Controller is supported by: SmartThings (with a custom handler, instructions included with the product), Hubitat, Home Assistant, and HomeSeer. Please do NOT buy this device if your hub isn't listed here, it will not be recognized correctly by your system..
  • NEW 700 SERIES: This product is built on the latest 700 series Z-Wave chip for better signal coverage than ever, faster communication, with S2 authenticated security and SmartStart for effortless pairing..
  • EASY INSTALLATION: Clear diagrams and 7-day a week support included. No side tabs and just 1.1" deep to fit shallow and crowded switch boxes. NEUTRAL WIRE REQUIRED (check before buying). The device is ETL certified and conforms with North American safety standards. Backed by a 5-year warranty..
Check Stock

Z-Wave Plus Smart Light Dimmer Plug Built-in Zwave Repeater/Range Extender Zwave Hub Required Works with SmartThings Wink- ZW39

  • Hassle-free Operation: Plug the smart outlet in, can control and dim your lights from anywhere, schedule a timed event or create a custom scene from....
  • Adjust brightness level from 10-100%: Manual & Remote Control,come on or turn off via a schedule, cuts energy costs and extends bulb life.
  • Plug and Play: The wall plug adds to your Z-Wave hub in minutes. Z-Wave Plus dim control for 120V light devices, max loading 500W.
  • Works with Alexa for voice control (Alexa device and hub sold separately). Compatible with the following Z-Wave certified Hubs: SmartThings, Wink,....
  • Once plugged in, the Wall Plug acts as a signal repeater that boosts connectivity between hub and devices. NOTE: Z-Wave gateway controller....
Check Stock

Wireless Z-Wave Multi-Input/Output Dry Contact Bridge Cert ID ZC08-16040002

  • BEFORE YOU BUY: Check to make sure your home automation controller / security panel is interoperable with our device. NOT ALL Z-wave Controllers are....
  • One 24VDC / 110 VAC Relay to control any low voltage device via Z-wave. Controls garage doors, motorized shades, gates, solenoid valves, etc. Relay....
  • One SIGNAL Input terminal block to receive low voltage (digital, analog, or pulse) signals via Z-wave. Use with reed sensors, contact sensors, door....
  • 9V AC power adaptor included. Low voltage wire is NOT included.
  • Please visit our website and youtube page for application details and how-to video's. Wiring diagrams are also downloadable on our website product....
Check Stock

Z-Wave Smart On/Off Light and Appliance Plug, Dual Outlet Plug-in, 1 Alway-On+ 1 Smart, Built-in Zwave Repeater, Zwave Hub Required, Works with SmartThings, Wink

  • Hassle-free Operation-Plug the smart outlet in, control lights from anywhere, schedule a timed event or create a custom scene from anywhere in the world, at any time of the day..
  • Two Outlet-This outlet contains 1 Always-On outlet+1 Z-wave outlet, which is more flexible and convenient to use..
  • Plug and Play-No wiring required. Simply plug in the device to a wall outlet and connect to your hub for convenient ON/OFF functions. The wall plug adds to your Z-Wave hub in minutes..
  • Voice Control-Works with Alexa for voice control (Alexa device and hub sold separately). Compatible with the following Z-Wave certified Hubs: SmartThings, Wink, ADT Pulse, Trane, Nexia, Honeywell, HomeSeer, Harmony Home Hub Extender, Vera, Connect and Iris..
  • Once plugged in, the Wall Plug acts as a signal repeater that strengthens Z-Wave signals and boosts connectivity between hub and devices. NOTE: Z-Wave gateway controller required- sold separately..
Check Stock

Zooz 700 Series Z-Wave Plus Mesh Network Scene Controller ZEN32, White | Z-Wave Hub Required

  • ...AL is present. Wire it just like the ZEN21/ZEN71 models. Please follow the appropriate diagram in the manual and rewire both boxes exactly as shown. Works great as a single pole switch too!.
  • Z-WAVE HUB COMPATIBILITY: Most basic Z-Wave systems aren't advanced enough to allow scene control programming. The ZEN32 Scene Controller is supported by: SmartThings (with a custom handler, instructions included with the product), Hubitat, Home Assistant, and HomeSeer. Please do NOT buy this device if your hub isn't listed here, it will not be recognized correctly by your system..
  • NEW 700 SERIES: This product is built on the latest 700 series Z-Wave chip for better signal coverage than ever, faster communication, with S2 authenticated security and SmartStart for effortless pairing..
  • EASY INSTALLATION: Clear diagrams and 7-day a week support included. No side tabs and just 1.1" deep to fit shallow and crowded switch boxes. NEUTRAL WIRE REQUIRED (check before buying). The device is ETL certified and conforms with North American safety standards. Backed by a 5-year warranty..
Check Stock

Aeotec Range Extender 6, Z-Wave Plus repeater

  • Z-Wave Plus wireless signal repeater and range extender. Compatible with Z-Wave and Z-Wave Plus..
  • Amplifies and repeats weak signals boosting the range and reliability of weak Z-Wave devices..
  • Plug in to 110 volt wall socket. Small design so it does not block other outlets.
  • Compatible with all Z-Wave gateways including Control4, Fibaro, SmartThings, and Vera..
  • Z-Wave Plus certified. Certification number: ZC10-16095239DescriptionYou use Z-Wave to manage your smart home. You use Range Extender 6 to keep Z-Wave reliable. Aeotec's Range Extender 6 works seamlessly to amplify and repeat weak Z-Wave and Z-Wave Plus signals. Simply plug it into a power socket, connect it to your Z-Wave network, and it automatically starts improving any poor Z-Wave signals that are in range. As it's custom desgined as a wireless signal booster, Range Extender 6 performs better than other Z-Wave devices that offer simply repeating.
  • it amplifies the signal too. Designed to use Z-Wave Plus, unlike previous editions Range Extender 6 can work with advanced Z-Wave features such as encryption and security devices such as door locks while remaining compatible with older versions of Z-Wave. It repeats signals 250% faster than other signal repeaters and can repeat Z-Wave signals up to 492....
Check Stock

Eaton RFAS05DW Z-Wave Anyplace Kit (RF9575DW Decorator Switch & RFTR9505-TDW Decorator Receptacle), White

  • Can be mounted to a wall or placed on any flat surface - screws and double sided tape included.
  • Can be used in existing Z-Wave network or as a stand alone controller.
  • Eliminating the need for traditional 3-way wiring. Total Outlet: 2.
Check Stock

Yale Security B-YRD216-ZW-JX-619 Yale Assure Lock Z-Wave with Jamestown Works with Ring Alarm, Smartthings, and Wink Smart Keypad Deadbolt with Matching Handleset, Satin Nickel

  • Never worry about carrying around or losing your keys again. Unlock and lock your home with ease from the backlit keypad. Create unique entry codes for friends and family and remove codes whenever you need to. This lock features Z-Wave and seamlessly integrates into 50+ home automation and security systems including Ring Alarm, SmartThings, Alarm, Honeywell, ADT, Wink and more! When added to most Z-Wave automation systems, lock and unlock your door, create entry codes, view access history and receive notifications from anywhere. The lock is tamper resistant, easy to install and even easier to use! *Features may vary based on Z-Wave controller. A matching passage handle set is included in this great bundle!.
  • Replaces your existing handle with a matching passage handle set!.
  • Works with Z-Wave smart home and alarm systems including Ring Alarm, Samsung SmartThings, Wink, Vera, Honeywell, Alarm, Qolsys and more. Lock/unlock, monitor and share access from your smart home app. *Hub and app required, features vary by system.
  • Forget using keys, just enter your code on the backlit keypad to unlock your door. Lock the door behind you by touching any number on the keypad..
  • Enable Auto Relock to ensure your door always locks behind you.
Check Stock

Yale Security Assure Lock SL Touchscreen with Z-Wave with Valdosta Lever - Works with Ring Alarm, Samsung Smartthings, Wink, ADT and More, Black

  • Never worry about carrying around or losing your keys again. Unlock and lock your home with ease from the backlit keypad. Create unique entry codes for friends and family and remove codes whenever you need to. This lock features Z-Wave and seamlessly integrates into 50+ home automation and security systems including Ring Alarm, SmartThings, Alarm, Honeywell, ADT, Wink and more! When added to most Z-Wave automation systems, lock and unlock your door, create entry codes, view access history and receive notifications from anywhere. The lock is tamper resistant, easy to install and even easier to use! Features may vary based on Z-Wave controller. A matching passage lever is included in this great bundle!.
  • Replaces your existing deadbolt with a smart, key-free deadbolt with touchscreen keypad - No keys to lose, no cylinder to pick! Comes with matching passage lever.
  • Replaces your existing handle with a matching passage lever!.
Check Stock

Yale Security B-YRD226-ZW-JX-619 Yale Assure Lock Z-Wave With Jamestown Works with Ring Alarm, Smartthings, and Wink Smart Touchscreen Deadbolt with Matching Handleset, Satin Nickel

  • Never worry about carrying around or losing your keys again. Unlock and lock your home with ease from the backlit touchscreen keypad. Create unique entry codes for friends and family and remove codes whenever you need to. This lock features Z-Wave and seamlessly integrates into 50+ home automation and security systems including Ring Alarm, SmartThings, Alarm, Honeywell, ADT, Wink and more! When added to most Z-Wave automation systems, lock and unlock your door, create entry codes, view access history and receive notifications from anywhere. The lock is tamper resistant, easy to install and even easier to use! Features may vary based on Z-Wave controller. A matching passage handle set is included in this great bundle!.
  • Replaces your existing handle with a matching passage handle set!.
  • Works with Z-Wave smart home and alarm systems including Ring Alarm, Samsung SmartThings, Wink, Vera, Honeywell, Alarm, Foleys and more. Lock/unlock, monitor and share access from your smart home app. Hub and app required, features vary by system.
  • Forget using keys, just enter your code on the backlit keypad to unlock your door. Lock the door behind you by touching any number on the keypad..
  • Enable Auto Relock to ensure your door always locks behind you.
Check Stock

Peanut Butter SmartSticks 3 Pack Bundle

  • LATEST Z-WAVE TECH: SmartStick+ Includes a 700 Series Z-Wave Module (v7.17x firmware) and is Z-Wave Plus V2 Certified.
  • SUPPORTS Z-WAVE S2 SECURITY: Includes Smart Start Inclusion (Requires Smart Start Compatible Hub or Software).
  • Z-FLASH COMPATIBLE: Works Nicely with HomeSeer Z-Flash OTA Firmware Updater.
  • Z-WAVE PLUS (V2) PERMORMANCE: Longest Range, Fastest Transmission Speed, Best Bandwidth.
  • SUPPORTS NETWORK BACKUP & RESTORE: Easily restore or move your network to another SmartStick+ (requires HomeSeer hub).
Check Stock