ReviewsZ Wave Light Bulb

Zooz Momentary Push-Button in-Wall Switch ZAC99

VERSATILE APPLICATION: Push-button control for garbage disposals. Can be used with Z-Wave dimmer modules for local dimming control (NOTE: THIS IS NOT A Z-WAVE DEVICE)..
MOMENTARY CONTROL: Press and hold to trigger the motor in your garbage disposal, release to stop. Tap to turn on the light, press and hold to adjust brightness, tap again to turn off the light when using with a Z-Wave dimmer module..
FLEXIBLE INSTALLATION: Accepts 14 AWG and 12 AWG wires. Works with loads up to 15 A..
EASY FIT: Slim design for extra room in the switch box..

Check Stock

Aeotec TriSensor, Z-Wave Plus S2 Enabled Zwave Motion Sensor, Temperature, Light Sensor, Work with Zwave Hub Smartthings 3-in 1 Security System, Battery Powered

3-in 1 Motion, Temperature, Light sensor. Motion sensor accurate to 23 feet, TriSensor also detects temperature -10~50°C / 14~122°C with accracy of ±1°C, 0~30000 LUX with ±3% accracy..
Wireless and Cordless. Powered by 1 x CR123A battery, estimated battery life: 1 Year. Battery not packed with the box..
Adjustable calibration. Craft your own smart home with 3 levels of detecting calibration..
Compatible with certified Z-Wave gateways including: Samsung SmartThings, Vera, Zipabox, Open Z-Wave, Homeseer HS3, Domoticz, Isy994i ZW universal controller and more..
Z-Wave Plus and Z-Wave S2 certified for quicker response time, better wireless range up to 490 feet in open space, and additional wireless security encryption. Z-Wave Plus certification number: ZC10-18056128..

Check Stock

EATON RF9640-NWS Z-Wave Plus Universal Dimmer, White Satin

Replaces standard switch to add local and wireless control.
Compatible with most common residential lighting loads including LED, CFL, INC, MLV, ELV, HAL.
Single pole and 3-Way control: Use with Z-Wave Plus Accessory dimmer RF9642-Z.
Features 7 step blue load indicating LED light that can be dimmed in ON or OFF state.
Supports Z-Wave Plus technology including S2 Security certification for advanced encryption & cyber-security.
Voice and app-based control when used with compatible Z-Wave controller.

Check Stock

ZRC-90US, BW8510US, by Remotec, Cert ID: ZC10-15100007

MAIN BUTTON: Connect a 120 V light fixture (up to 150 W for LED's) to control it via Z-Wave or use the main button for wireless control only with up to 7 button triggers available. Z-Wave hub required, sold separately. NOTE: your smart speaker is NOT a Z-Wave hub..
4 REMOTE BUTTONS: Program each button to activate scenes or other devices in your network for one-touch control of your favorite smart lighting presets. Use the buttons to enter "Away" mode on your way out or to turn off all of the lights before you go to bed with a single click..
DIRECT 3-WAY SOLUTION: No add-on switch needed! Works with regular 3-way switches as long as NEUTRAL is present. Wire it just like the ZEN21/ZEN71 models. Please follow the appropriate diagram in the manual and rewire both boxes exactly as shown. Works great as a single pole switch too!.
Z-WAVE HUB COMPATIBILITY: Most basic Z-Wave systems aren't advanced enough to allow scene control programming. The ZEN32 Scene Controller is supported by: SmartThings (with a custom handler, instructions included with the product), Hubitat, Home Assistant, and HomeSeer. Please do NOT buy this device if your hub isn't listed here, it will not be recognized correctly by your system..
NEW 700 SERIES: This product is built on the latest ....

Check Stock

Zooz Z-Wave Plus Q Sensor ZSE11 | Motion, Temperature, Humidity, Light (Hub Required)

4 SMART SENSORS: Get motion alerts and monitor temperature, humidity, and light to take your smart home to the next level. Use this device as the trigger to lighting automations, security alerts, or climate control. It's as versatile and as quick to report as can be. Compatible Z-Wave hub required (sold separately)..
FLEXIBLE MOUNT: Use the included mounting bracket to adjust the sensor's field of view and ensure precise monitoring. Power the sensor with batteries (included) or a micro USB cable (sold separately). Always use a single power source only. Works as a Z-Wave repeater when included on USB power..
Z-WAVE COMPATIBILITY: Most basic Z-Wave systems aren't advanced enough to display multisensors correctly. The ZSE11 Q Sensor is supported by: SmartThings (with a custom handler, instructions included with the product), Hubitat, Home Assistant, Indigo, Vera, and HomeSeer. Please do NOT buy this device if your hub isn't listed here, it will not be recognized by your system..
MINIMAL DESIGN: Simple and modern look to compliment any interior. This sensor is small enough for discreet monitoring of your home, office, or warehouse space..
MORE SECURITY: Includes S2 Authenticated Z-Wave security and SmartStart for the safest communication possible. Back by a ....

Check Stock

Minoston Z-Wave Switch On/Off Toggle Wall Light Switch Works with SmartThings, Wink, Support 3-Way Installation, Signal Repeater, Required Z-Wave Hub, White(MS12Z)

Voice Control: This Z-Wave smart toggle on/off switch is compatible with Alexa Echo and Google Home. REQUIRES AN ALEXA SUPPORTED HUB for voice control with Echo Products. CANNOT connect directly with ECHO PLUS..
Z-Wave certified gateway: The MS12Z is compatible with Samsung Smartthings, the Wink Hub, and all certified Z-Wave controllers..
Work with: This Z-Wave enabled universal switch works for most residential lighting control. It supports LED, CFL,incandescent and halogen bulbs. Supported voltage - 120 VAC..
Wireless control: Turn lights on/off, schedule, or group the light from multiple switches all with a smartphone app, automatically turn lights on when you are home, and off when you are away..
Installation Requires: hard-wired connections. Neutral wire required for single-pole and 3-way installation Ca This Z-Wave switch works w/existing (dumb) switch for a 3-way wiring scenario..

Check Stock

NEO Z-Wave Plus Motion Sensor Z Wave Detector Home Automation Easy Installation Works with SmartThings Wink Vera Green

▶ 3-in-1 SMART SENSOR: z-wave motion sensor can report motion, temperature detection and measures light levels. Feeling the environment change,....
▶ 110-DEGREE MOTION DETECTION FOR ALARM: Motion can be detected from a top view of up to 110°, the position is at a height of 7 meters above the....
▶ LONG-TIME&CONTINUOUS DETECT: The included CR123A battery makes the sensor much longer and service more intimate. Advanced infrared detection....
▶ Z-WAVE TECHNOLOGY: Z-Wave Plus Certified and integrates with most Z-Wave Certified hubs. e.g. SmartThings, Vera, Fibaro, Zipato, Honeywell, Aeotec....
【Please Note】: When the motion sensor will NOT be recognized (Wink): the motion sensor will be recognized as "Generic sensor" instead. only has....

Check Stock

Zooz Z-Wave Plus S2 Outdoor Motion Sensor ZSE29

OUTDOOR SENSOR: Introducing the first Z-Wave motion detector created for outdoor use. Monitor activity remotely through your Z-Wave hub (required, sold separately) and automate outdoor lighting based on motion. Keep away from direct rainfall and sunlight..
EASY TO INSTALL: Add it to your system quickly through auto-inclusion and mount it in minutes with just a couple of screws. Power it with batteries (included) or micro USB (cable + adapter sold separately). Program motion time-out and light level trigger by turning the knobs right on the sensor. New version (2.0) comes with advanced settings for motion sensitivity and lux reports if supported by your hub. Motion detection up to 20 feet..
COMPATIBILITY: The sensor works great on HomeSeer, Hubitat, Fibaro, and Vera. Custom device handler needed for SmartThings (go to Zooz support portal or contact seller for instructions). Does NOT work with Wink, Ring, ADT, or other Z-Wave alarm panels. Alexa is NOT a Z-Wave hub (the sensor won't work directly with Echo)..
SECURITY: Equipped with the latest authenticated S2 security protocol for encrypted signal and hacker-proof smart home (NOTE: your Z-Wave hub needs to support S2 for this feature to work). Tamper protection and low battery alerts for your peace of mi....

Check Stock

Aeotec Multisensor 6 Z-Wave Plus 6-in1 motion temperature humidity light UV vibration sensor

6-in-1 Z-Wave Plus MultiSensor: motion, humidity, temperature, light lux, UV, vibration sensor..
Super-small at 1.8 inches. Can be installed in corner, in-wall, on shelf or in downlight..
Works with certified Z-Wave gateways and tested with Fibaro, Indigo 7, openHAB, SmartThings, Vera..
Z-Wave Plus certified. Certification number: ZC10-15070011.

Check Stock

GoControl WD500Z-1 Z-Wave 500-Watt Wall-Mount Dimmer Switch

Z-wave & Manual Control For Connected Lights.
White.This device requires a neutral connection.
Easily replace existing standard switch to add a Z-Wave controlled lighting dimmer. Compatible with any Z-Wave certified gateway.
Linear Z-Wave products provide up to 100 feet range between the wireless controller and/or the closest Z-Wave device.
Linear has been providing best-in-class home & business control solutions for over 50-years and is a leading worldwide mfg.. of Z-Wave products.
Compatible with incandescent and most dimmable fluorescent, halogen, Xenon and LED fixtures and The wires are pre-cut for easy stripping..

Check Stock

GoControl/Linear GD00Z-4 Z-Wave Garage Door Opener Remote Controller, Small, Black

Go Control z-wave products provide up to 100 feet range between the wireless controller and/or the closest z-wave device.
Nortek security & control/Go Control has been providing best-in-class home & business control solutions for over 50-years and is a leading worldwide mfg. . of z-wave products.
Garage door position sensor frequency: 345 MHz.
This product requires the use and pre-installation of a Z wave HUB..
Add Z-Wave control to your current garage door opener. Compatible with virtually any automatic garage opener w-sectional garage door.
Linear Z-Wave products provide up to 100 feet range between the wireless controller and/or the closest Z-Wave device.
Provides both audible and visual warnings prior to door movement.
Linear has been providing best-in-class home & business control solutions for over 50-years and is a leading worldwide mfg.. of Z-Wave products.
Specifications - Power: 120VAC, 50/60 Hz, Garage door position sensor frequency: 345 MHz, Z-Wave Frequency: 908.42 MHz.

Check Stock