ReviewsZ Wave Light Bulbs

Enbrighten, White & Light Almond, GE Z-Wave Plus Smart Motion Light Dimmer, Works with Alexa, Google Assistant, SmartThings, Wink, Zwave Hub Required, Repeater/Range Extender, 3-Way Compatible, 26933

...tified hub). Works with the following Z-Wave certified hubs: SmartThings, Ring Alarm, Wink, ADT Pulse, ADT Command, Trane, Vivint, Nexia, Honeywell, Home Seer, Harmony Home Hub Extender, Vera and more..
SELECt MOTION CONTROL – The dimmer adjusts brightness levels of dimmable LED, CFL, incandescent and halogen lights from 0-100 percent to reduce energy costs and improve bulb life. Personalize the dimmer with three motion-detection options – occupancy, vacancy and manual. Occupancy mode turns lights ON/OFF automatically, while lights are turned on manually and off automatically in the vacancy setting. To deactivate the motion sensor, select manual operation. With five time-out duration options ranging from five seconds to 30 minutes and up to 180-degree detection coverage, the dimmer accommodates any room with varying amounts of activity. Additionally, enjoy custom scenes, versatile scheduling and convenient alerts with remote operation and voice control when connected to a compatible hub..
3-WAY READY – The smart device operates perfectly on its own or seamlessly integrates into multi-switch setups with required add-on switches – models 12723 or 46199. Up to four add-on switches can be connected to the same device..

Check Stock

EATON RF9642-ZDW Z-Wave Plus Accessory Dimmer, White

Compatible Z-Wave controller/hub required.
Z-Wave Plus devices can be controlled through voice assistants such as Amazon Alexa or Google Home when used with compatible Z-Wave controller/hub.
Must be used with Z-Wave Plus Master Dimmer (RF9640-N).
Multi-location dimming when used with master dimmer (RF9640-N).
Dimmable seven step blue LED display alongside push pad indicates selected light level - even in full daylight (coordinates light level status with associated dimmer accessory).

Check Stock

GE Enbrighten Z-Wave Plus 1000-Watt Smart Dimmer, No Neutral Wire Required, Halogen/Incandescent Bulbs Only, Works with Alexa/Google Assistant, ZWave Hub Required, White & Light Almond, 14299

IDEAL FOR OLDER HOMES – A neutral wire is not required for installation of the indoor, hardwired dimmer making it ideal for old as well as many new homes not designed with home automation in mind. The dimmer provides full-range dim ability by adjusting the brightness of incandescent and halogen lights from 0-100 percent to reduce energy costs and improve bulb life. Easily replace any standard in-wall switch to remotely turn ON/OFF, adjust lighting brightness and create schedules for a wide range of fixtures. Control the device remotely with your smartphone and voice commands when connected to a compatible hub. Home automation is simple through custom scenes, versatile scheduling and convenient alerts..
3-WAY READY – The smart device operates perfectly on its own or seamlessly integrates into multi-switch setups with required add-on switches – models 12723 or 46199. Up to four add-on switches can be connected to the same device..
FULL-HOME COVERAGE – Z-Wave Plus works with all previous Z-Wave generations to allow continued expansion of your home-automation network. The dimmer is capable of controlling indoor or outdoor fixtures for whole-home automation and repeats your Z-Wave signal from your hub or other devices to exte....

Check Stock

GE Dimmer, 3-Way, Toggle On/Off with Slide Lighted, Ivory 18026

...Extended signal range increases your home automation coverage to enhance your control..
EASY INSTALLATION – Requires indoor in-wall installation with hardwired connections. NEUTRAL WIRE REQUIRED. Wall plate not included. Full-range dimmability for use with dimmable LEDs and CFLs as well as incandescent and halogen bulbs. Supported wattage – 600W incandescent.
300W LED/CFL. Supported voltage – 120VAC. Operating temperature range 32-104 degrees Fahrenheit..

Check Stock

Nortek GoControl WD500Z5-1: Z-Wave Wall Dimmer Switch 500W 908.42 MHz 120VAC 15A

The WD500Z5-1 Wall Mounted Dimmer allows remote ON/OFF control and dimming of connected lights. The Z-Wave Wall Mount Dimmer is easily wired in place of a standard wall dimmer. This device requires a Neutral connection. The Wall Mounted Dimmer integrates with other Nortek Security & Control Z-Wave enabled products, and can also act as a wireless repeater to ensure that commands intended for another device in the network are received (useful when a device would otherwise be out of radio range)..
Replaceable Trim Ring The WD500Z5-1 Wall Mount Switch has a field replaceable trim ring - the color of the device can be altered with the Trim Ring Kit model in black, brown, almond and ivory. Auto-Sense: Unique to Nortek Security & Control, the Auto-Sense feature allows for local lamp activation independent of the Z-Wave controller status..
Maximum Load: 500 Watts for control of permanently installed lighting fixtures only (Not for control of receptacles) Signal (Frequency): 908.42 MHz Range: Up to 100 feet line of sight between the wireless controller and/or the closest Z-Wave device Input: 120v 15A 60Hz.
Network wide inclusion Scene: Command class Security beaming Requires a Neutral Auto-Sense feature built-in Replaceable trim ring design.

Check Stock

Honeywell Z-Wave Plus Smart Light and Appliance Control Duplex Receptacle Outlet, In-Wall Tamper Resistant| 1 Always On/1 Controllable | ZWave Hub Required - SmartThings, Wink, Alexa Compatible, 39349

...HO PLUS (Only ZigBee products can connect directly to Echo Plus)..
REQUIRES A Z-WAVE CERTIFIED HUB – Compatible with the following Z-Wave Hubs: Honeywell, SmartThings, Pulse, Trane, Wink, Nexia, Honeywell, HomeSeer, Harmony Home Hub Extender, Vera, Fibaro, Vivint and ADT..
SCHEDULE LIGHTS AND OTHER DEVICES- Schedule timed events for connected devices. Customize scenes for day or night, home or away. Wirelessly control switch from anywhere through your smartphone, tablet, PC or Z-Wave remote. Switch can be operated manually as well..
2 TAMPER RESISTANT OUTLETS – 1 always-on grounded outlet (top) and 1 wirelessly controlled outlet (bottom). Both outlets are tamper resistant in order to prevent objects from being forcibly inserted into a single slot. Also features a blue LED indicator light to locate the outlet in a dark room..
IN-WALL INSTALLATION WITH HARD WIRED CONNECTIONS (NEUTRAL WIRE REQUIRED) – replace your existing outlet in as little as 15 minutes. Works with all LED, CFL, halogen and incandescent bulbs, and other devices. Wall plate is NOT included..

Check Stock

Enbrighten Z-Wave Plus Smart Light Dimmer with QuickFit and SimpleWire, 3-Way Ready, Compatible with Alexa, Google Assistant, ZWave Hub & Neutral Wire Required, Toggle, 46204

... Extended signal range increases your home automation coverage to enhance your control..
EASY INSTALLATION – Requires indoor in-wall installation with hardwired connections. NEUTRAL WIRE REQUIRED. Wallplate not included. Full-range dimmability for use with dimmable LEDs and CFLs as well as incandescent and halogen bulbs. Supported wattage – 600W incandescent.
300W LED, CFL. Supported voltage – 120VAC. Operating temperature range 32-104 degrees Fahrenheit..

Check Stock

GE Enbrighten Z-Wave Plus Smart Toggle Light Switch, On/Off Control, in-Wall, Built-in Repeater/Range Extender, Zwave Hub Required, Works with SmartThings Wink and Alexa, 14292

...devices to extend your range by up to 150ft. Extended signal range increases your home automation coverage to enhance your control..
EASY INSTALLATION – Requires indoor in-wall installation with hardwired connections. NEUTRAL WIRE REQUIRED. Wall plate not included. Works with all LED, CFL, incandescent and halogen bulbs as well as other devices. Operating temperature range 32-104 degrees Fahrenheit..

Check Stock

Aeotec Siren 6, Z-Wave Plus S2 Enabled Zwave Siren Safety Speaker, Wall-Mounted Sound & Light Security Intruder Zwave Alarm with Backup Battery, 110dB

Aeotec Zwave Siren 6 is your home smart indoor siren. Built with Z-Wave Plus S2 to be a smart home security siren, it features a 110dB speaker coupled with 1,000 lumens visual light alert strobe. Can be used as siren for security alarm, smoke sensor, and CO sensors via Z-Wave.
Pre-loaded 6 security sounds, 8 safety sounds, and 30 tones in total. Each tone is volume adjustable between 80dB and 110dB.
4-hour backup battery lets Siren 6 work even when power is turned off.
Can also be used as doorbell by pairing with Aeotec Button. Can use up to 3 zwave buttons, each sold separately.
5-Compatible with certified Z-Wave gateways including: Samsung SmartThings, HomeSeer, Open Z-Wave, Zipabox and more(Not compatible with Vera). Z-Wave Plus and Z-Wave S2 certified for quicker response time, better wireless range up to 490 feet in open space, and additional wireless security encryption. Z-Wave Plus certification number: ZC10-19046417..

Check Stock

Aeotec Range Extender 6, Z-Wave Plus repeater

Z-Wave Plus wireless signal repeater and range extender. Compatible with Z-Wave and Z-Wave Plus..
Amplifies and repeats weak signals boosting the range and reliability of weak Z-Wave devices..
Plug in to 110 volt wall socket. Small design so it does not block other outlets.
Compatible with all Z-Wave gateways including Control4, Fibaro, SmartThings, and Vera..
Z-Wave Plus certified. Certification number: ZC10-16095239DescriptionYou use Z-Wave to manage your smart home. You use Range Extender 6 to keep Z-Wave reliable. Aeotec's Range Extender 6 works seamlessly to amplify and repeat weak Z-Wave and Z-Wave Plus signals. Simply plug it into a power socket, connect it to your Z-Wave network, and it automatically starts improving any poor Z-Wave signals that are in range. As it's custom desgined as a wireless signal booster, Range Extender 6 performs better than other Z-Wave devices that offer simply repeating.
it amplifies the signal too. Designed to use Z-Wave Plus, unlike previous editions Range Extender 6 can work with advanced Z-Wave features such as encryption and security devices such as door locks while remaining compatible with older versions of Z-Wave. It repeats signals 250% faster than other signal repeaters and can repeat Z-Wave signals up to 492....

Check Stock

NEO Z-Wave Plus Smart Light Switch 1 Gang 2 Switchs in-Wall Smart Switch Touch Panel Touch Sensitive Home Automation Remote Control, Work with Z-Wave Hub

【SIMPLE OPERATION】 Each light switch has a unique ID code. When you add or remove the switch from the alarm host, just place light switch in the Z-wave network range of gateway. The LED Night Navigation can easily to spot the position of the lights in the night..
【MAKING A COMPARISON】Compare with the traditional light switch. The device not only does it allow for manual control, but also remote. Meet the requirements of traditional switch wiring, no need to change the exiting wire.High Touch Sensitive, it can provide immediately response. You also can check the real-time status of lights from your mobile phone APP. Remind you to turn off lights and save energy..
【AUTOMATE YOUR LIFE】 Automate your NEO smart switch with Z-Wave gateway and set it to turn lights on or off when you get home. The smart switch can control incandescent, resistive, fluorescent, and inductive lights. Only used indoor, NOT dimmer..
【Z-WAVE TECHNOLOGY】 Z-Wave Plus Certified and integrates with most Z-Wave Certified hubs. Support multi-device controlled, can be working interactively with other Z-Wave sensors via the gateway..
【Important Notes Before Buying】 1) Please double check the size of the switch and mounting bracket. The device is 1 gang and support 2 switc....

Check Stock