ReviewsZ Wave Temp Sensor

Aeotec Siren 6, Z-Wave Plus S2 Enabled Zwave Siren Safety Speaker, Wall-Mounted Sound & Light Security Intruder Zwave Alarm with Backup Battery, 110dB

  • Aeotec Zwave Siren 6 is your home smart indoor siren. Built with Z-Wave Plus S2 to be a smart home security siren, it features a 110dB speaker coupled with 1,000 lumens visual light alert strobe. Can be used as siren for security alarm, smoke sensor, and CO sensors via Z-Wave.
  • Pre-loaded 6 security sounds, 8 safety sounds, and 30 tones in total. Each tone is volume adjustable between 80dB and 110dB.
  • 4-hour backup battery lets Siren 6 work even when power is turned off.
  • Can also be used as doorbell by pairing with Aeotec Button. Can use up to 3 zwave buttons, each sold separately.
  • 5-Compatible with certified Z-Wave gateways including: Samsung SmartThings, HomeSeer, Open Z-Wave, Zipabox and more(Not compatible with Vera). Z-Wave Plus and Z-Wave S2 certified for quicker response time, better wireless range up to 490 feet in open space, and additional wireless security encryption. Z-Wave Plus certification number: ZC10-19046417..
Check Stock

HomeSeer HS-MS100+ G2 Z-Wave Plus Motion Sensor

  • MOTION SENSOR: Sends Z-Wave commands back to the hub when motion has been sensed and when motion has not been sensed for a period of time..
  • EASY TO INSTALL: Includes 1-screw magnetic mount for easy installation anywhere in your home..
  • SECURE: Includes Z-Wave S2 encryption for the highest level of security..
  • COMPATIBILITY: Works with most Z-Wave hubs. Device handler available for SmartThings new app users..
Check Stock

HomeSeer HS-LS100+ Z-Wave Plus Leak Sensor

  • LEAK SENSOR: Sends Z-Wave commands back to your hub when water is sensed or has not been sensed for a period of time..
  • TWO MOUNTING OPTIONS: Simply place the unit where you want it or attach it to the provided cable probe wall mount for even greater accuracy..
  • SECURE: Works with Z-Wave S2 encryption for the highest level of security..
  • COMPATIBILITY: Works with most Z-Wave hubs. Device handler available for SmartThings new app users..
Check Stock

FIBARO Motion Sensor Z-Wave Plus Multisensor-Movement Temperature Light Intensity Accelerometer FGMS-001 doesn t work with HomeKit

  • All you need: dependable motion alerts, quick light reports, real-time temperature readings, and vibration notifications sent straight to your z-wave....
  • And more: all data is transmitted to your system using encrypted signals, protected by tamper alerts. With the multifunctional led, you can access....
  • Hub required: this sensor will work beautifully with any open z-wave system like smart things, Vera, nexia, home center lite, or home seer. It is not....
  • Ultra small: install the smallest 4-in-1 sensor anywhere without ruining the view. It attaches to any flat surface with a single screw or a piece of....
  • You're covered: this is a z-wave plus certified and ul listed device created and built in Europe from quality materials. Support portal and....
Check Stock

Aeotec Multisensor 6 Z-Wave Plus 6-in1 motion temperature humidity light UV vibration sensor

  • 6-in-1 Z-Wave Plus MultiSensor: motion, humidity, temperature, light lux, UV, vibration sensor..
  • Super-small at 1.8 inches. Can be installed in corner, in-wall, on shelf or in downlight..
  • Works with certified Z-Wave gateways and tested with Fibaro, Indigo 7, openHAB, SmartThings, Vera..
  • Z-Wave Plus certified. Certification number: ZC10-15070011.
Check Stock

Sensative Z-Wave Plus Indoor/Outdoor Flood Prevention and Water Sensor Strips Drip Works with SmartThings

  • Ultra-thin Z-Wave Plus sensor notifies you when water leaks or freezing temperatures are detected.
  • Included temperature and light sensors monitor ambient temperature and light.
  • Communicates with Z-Wave devices up to 131 feet (40 meters).
  • Compatible with most Z-Wave controllers, plus Ring, Raspberry Pi and more.
Check Stock

Fibaro FGFS-101 ZW5 FGFS101ZW5 Flood Sensor, Z-Wave Plus Water Leak Detector-FGFS-101, White

  • The ultimate Z-Wave Plus water leak sensor/detector, with temperature and tilt sensor.
  • Get alerted on your smartphone/tablet/email, trigger certain lights, activate specific scenes, or even sound an alarm when water is detected.
  • Three 24K plated Gold telescopic feet always makes contacts with both even and uneven surfaces and never corrodes.
  • Built-in temperature sensor can alert you If there is a sudden rise or fall in temperature, which can help prevent damage due to frozen pipes.
  • Z-Wave Plus certified sensor with enhanced features such as longer battery life and better range: ZC10-16025007.
Check Stock

Zooz 700 Series Z-Wave Plus Water Leak XS Sensor ZSE42 for for Smart Flood Prevention. Hub Required (Sold Separately). Compatible with SmartThings, Hubitat, and Ring Alarm.

  • PREVENT WATER DAMAGE: Receive alerts on your phone when water is detected by the sensor once you include it to your Z-Wave hub (required, sold separately). Check below for compatibility. Pair with the Zooz Titan Water Valve actuator (sold separately) for a smart flood prevention system..
  • EXTRA SMALL: Place it under your appliances to monitor for leaks discreetly. It's OK if the device is splashed with water but it can't be fully submerged so keep that in mind when choosing the installation location..
  • NEW 700 SERIES CHIP: You get more Z-Wave range and longer battery life with this sensor. Better signal means more reliable and quicker reports to help you act faster in case of a leak..
  • Z-WAVE COMPATIBILITY: Supported by open Z-Wave systems only, including Home Assistant, HomeSeer, Hubitat, and Ezlo hubs (NOT supported by older Vera hubs). Compatible with SmartThings and Ring Alarm (no access to advanced settings). NOT supported by alarm panels like Vivint, Qolsys, 2GIG, ADT, or others..
  • SMART SECURITY: Equipped with the highest level of S2 security with SmartStart for fully ....
Check Stock

Zooz 700 Series Z-Wave Plus Open|Close XS Sensor ZSE41 for Door, Window, and Gate Monitoring. Hub Required (Sold Separately). Compatible with SmartThings, Hubitat, and Ring Alarm.

  • FAST AND RELIABLE: Get notified on your Z-Wave hub’s app or via text when a door or window is opened for easy DIY security monitoring. Use on safety gates, cabinet doors, patio doors, and more. Z-Wave hub required, sold separately (check below for compatibility)..
  • EXTRA SMALL: Perfect for discreet mounting with a slim profile to fit most frames and surfaces..
  • OUTDOOR CASE AVAILABLE: The sensor is coated with protective rubber oil against corrosion and water leak damage. A splash is fine but if you want to install it outdoors, you’ll need a dedicated waterproof case (sold separately, ask Zooz about it)..
  • Z-WAVE COMPATIBILITY: Supported by open Z-Wave systems only, including Home Assistant, HomeSeer, Hubitat, Vera, and Ezlo hubs. Compatible with SmartThings and Ring Alarm (no access to advanced settings). NOT supported by alarm panels like Vivint, Qolsys, 2GIG, ADT, or others..
  • SMART SECURITY: 700 series Z-Wave chip with longer range, better battery life, and the highest level of S2 security with SmartStart for fully encrypted communication. Covered by a 5-year limited warranty and backed by lifetime tech support 7 days a week..
Check Stock

Zooz Z-Wave Plus S2 Motion Sensor ZSE18 with Magnetic Mount, Works with Vera and SmartThings

  • EXTRA FEATURES: Adjustable motion sensitivity and retrigger time. Built-in Z-Wave range test tool for easier network troubleshooting. Vibration reports on SmartThings and other selected gateways..
  • 2 POWER SOURCES: Runs on a single battery for up to a year (depending on traffic and settings) OR on micro USB cable (NOT INCLUDED). Acts as signal extender when connected to USB..
  • FLEXIBLE DESIGN: Extremely small and light, the sensor sits in a perfectly shaped magnetic mounting base for precise and firm positioning..
  • CERTIFIED SECURE: Uses the latest S2 Z-Wave protocol and AES-128 signal encryption. Z-Wave Plus chip for longer range and increased battery life..
Check Stock

Aeotec Range Extender 6, Z-Wave Plus repeater

  • Z-Wave Plus wireless signal repeater and range extender. Compatible with Z-Wave and Z-Wave Plus..
  • Amplifies and repeats weak signals boosting the range and reliability of weak Z-Wave devices..
  • Plug in to 110 volt wall socket. Small design so it does not block other outlets.
  • Compatible with all Z-Wave gateways including Control4, Fibaro, SmartThings, and Vera..
  • Z-Wave Plus certified. Certification number: ZC10-16095239DescriptionYou use Z-Wave to manage your smart home. You use Range Extender 6 to keep Z-Wave reliable. Aeotec's Range Extender 6 works seamlessly to amplify and repeat weak Z-Wave and Z-Wave Plus signals. Simply plug it into a power socket, connect it to your Z-Wave network, and it automatically starts improving any poor Z-Wave signals that are in range. As it's custom desgined as a wireless signal booster, Range Extender 6 performs better than other Z-Wave devices that offer simply repeating.
  • it amplifies the signal too. Designed to use Z-Wave Plus, unlike previous editions Range Extender 6 can work with advanced Z-Wave features such as encryption and security devices such as door locks while remaining compatible with older versions of Z-Wave. It repeats signals 250% faster than other signal repeaters and can repeat Z-Wave signals up to 492....
Check Stock