ReviewsZ Wave Water Sensor

Monoprice 700 Door/Window Sensor | Longer Wireless Range, Burglar Alert, Easy Installation, Ideal for Home, Garage, Apartment - Z-Wave Plus Series

  • Easy Setup: Setup is as simple as scanning the QR code on the sensor with your smartphone, then following the step by step instructions..
  • Powerful and Robust Security: The Z Wave Plus V2 Series 700 standard provides the highest level of security of any Z Wave standard. It supports Network Key, AES 128 bit encryption, ECDH key agreement protocol, Security 2 (S2), and SmartStart, which renders man in the middle hacking virtually impossible..
  • Long Battery Life: The Z Wave Plus Series 700 standard delivers up to 50% longer battery life than previous Z Wave standards, allowing this sensor's battery to last for up to 10 years..
  • Small and Compact: Measuring only 2.2" x 1.0" x 0.2" (56 x 26 x 6 mm), this is one of the smallest and most compact door/window sensors on the market..
  • Longer Wireless Range: The Z Wave Plus Series 700 standard provides a wireless hop mode range of up to 800 meters (2,624 feet), more than 200 meters greater than the Series 500 standard..
Check Stock

Trane XL850, TCONT850AC52UA, by Trane, Cert ID: ZC08-14090003

  • Frequency Region: U.S./Canada/Mexico, Z-Wave Library Version: 4.55.00.
  • Device Categories: Thermostats,Controllers.
  • Supported Command Classes: Association,Battery,Binary Sensor,Binary Switch,Clock,Configuration,Door Lock,Firmware Update MD V2,Thermostat Setpoint V2,User Code,Wake Up,Sensor Multilevel V2,Switch.
  • Controlled Command Classes: Association,Battery,Binary Sensor,Binary Switch,Clock,Configuration,Door Lock,Firmware Update,Multilevel Sensor,Multilevel.
Check Stock

Zwave Door Sensor Window Sensor, Z-Wave Plus Enabled Aeotec 3-1 Door Window Sensor 7 Pro, Zwave Hub Required, Gen 7, White (Door/Window Sensor 7 Pro)

  • Smallest 3-in-1 Zwave Door Sensor Window Sensor. MultiSensors include magnetic contact, dry contact relay, and a tilt sensor. The tilt detection must be in operation with the magnet sensor in its description.40% smaller than previous generation at only 2.8”x0.75”x0.7” (main body).
  • 3 year+ battery life powered by 1 x 1/2 AA battery. Optimised to use up to 66% less battery power to communicate than previous generations..
  • With a SmartStart enabled gateway, you can connect it to your ZWave hub by simply scanning its QR code. From there, stick it to your door and Door / Window Sensor 7 is ready to power your home and protect it..
  • Zwave Window Sensor 7 is powered by the speed enhancements that come from Z-Wave Plus and Z-Wave S2 enabling it to wireless communicate 50% faster and up to 67% further in real-world use..
  • Compatible with Samsung SmartThings, Vera, Zipabox, HomeSeer, Ring, Open Z-Wave, Nexia, Domoticz and more., Frequency: 908.40 MHz, 916.00 MHz, ID: ZC12-20080085.
Check Stock

First Alert Smoke Detector and Carbon Monoxide Detector Alarm | Z-Wave

  • Help keep your family safe with this battery-operated smoke and carbon monoxide combination alarm. This easy-to-install smoke and carbon monoxide combination alarm connects with other Z-Wave compatible alarms and a Z-Wave hub (sold separately).
  • Integrated wireless alarm system is Iris compatible to send you mobile alerts and emails, so you’re aware of dangers after the alarm is activated, whether you’re home or away.
  • Alarm features photoelectric smoke-sensing technology optimized to detect larger smoke particles produced by smoldering fires, and an electrochemical carbon monoxide sensor.
  • Certified for use with Nexia Home Intelligence, Ring Home Security System, and other third party Z-Wave systems.
  • Includes test/silence button, side-access battery door, plus a tamper-resistant battery drawer and pins that lock the alarm to the mounting bracket.
  • Certified for use with Nexia Home Intelligence or other Z-Wave systems.
  • Combination Smoke and Carbon Monoxide protection that alerts you whether you are home or away.
  • Photoelectric smoke sensor helps reduce false alarms such as from cooking or shower steam.
Check Stock

Zooz 700 Series Z-Wave Plus Open|Close XS Sensor ZSE41 for Door, Window, and Gate Monitoring. Hub Required (Sold Separately). Compatible with SmartThings, Hubitat, and Ring Alarm.

  • FAST AND RELIABLE: Get notified on your Z-Wave hub’s app or via text when a door or window is opened for easy DIY security monitoring. Use on safety gates, cabinet doors, patio doors, and more. Z-Wave hub required, sold separately (check below for compatibility)..
  • EXTRA SMALL: Perfect for discreet mounting with a slim profile to fit most frames and surfaces..
  • OUTDOOR CASE AVAILABLE: The sensor is coated with protective rubber oil against corrosion and water leak damage. A splash is fine but if you want to install it outdoors, you’ll need a dedicated waterproof case (sold separately, ask Zooz about it)..
  • Z-WAVE COMPATIBILITY: Supported by open Z-Wave systems only, including Home Assistant, HomeSeer, Hubitat, Vera, and Ezlo hubs. Compatible with SmartThings and Ring Alarm (no access to advanced settings). NOT supported by alarm panels like Vivint, Qolsys, 2GIG, ADT, or others..
  • SMART SECURITY: 700 series Z-Wave chip with longer range, better battery life, and the highest level of S2 security with SmartStart for fully encrypted communication. Covered by a 5-year limited warranty and backed by lifetime tech support 7 days a week..
Check Stock

Aeotec Siren 6, Z-Wave Plus S2 Enabled Zwave Siren Safety Speaker, Wall-Mounted Sound & Light Security Intruder Zwave Alarm with Backup Battery, 110dB

  • Aeotec Zwave Siren 6 is your home smart indoor siren. Built with Z-Wave Plus S2 to be a smart home security siren, it features a 110dB speaker coupled with 1,000 lumens visual light alert strobe. Can be used as siren for security alarm, smoke sensor, and CO sensors via Z-Wave.
  • Pre-loaded 6 security sounds, 8 safety sounds, and 30 tones in total. Each tone is volume adjustable between 80dB and 110dB.
  • 4-hour backup battery lets Siren 6 work even when power is turned off.
  • Can also be used as doorbell by pairing with Aeotec Button. Can use up to 3 zwave buttons, each sold separately.
  • 5-Compatible with certified Z-Wave gateways including: Samsung SmartThings, HomeSeer, Open Z-Wave, Zipabox and more(Not compatible with Vera). Z-Wave Plus and Z-Wave S2 certified for quicker response time, better wireless range up to 490 feet in open space, and additional wireless security encryption. Z-Wave Plus certification number: ZC10-19046417..
Check Stock

HomeSeer HS-MS100+ G2 Z-Wave Plus Motion Sensor

  • MOTION SENSOR: Sends Z-Wave commands back to the hub when motion has been sensed and when motion has not been sensed for a period of time..
  • EASY TO INSTALL: Includes 1-screw magnetic mount for easy installation anywhere in your home..
  • SECURE: Includes Z-Wave S2 encryption for the highest level of security..
  • COMPATIBILITY: Works with most Z-Wave hubs. Device handler available for SmartThings new app users..
Check Stock

FIBARO Motion Sensor Z-Wave Plus Multisensor-Movement Temperature Light Intensity Accelerometer FGMS-001 doesn t work with HomeKit

  • All you need: dependable motion alerts, quick light reports, real-time temperature readings, and vibration notifications sent straight to your z-wave....
  • And more: all data is transmitted to your system using encrypted signals, protected by tamper alerts. With the multifunctional led, you can access....
  • Hub required: this sensor will work beautifully with any open z-wave system like smart things, Vera, nexia, home center lite, or home seer. It is not....
  • Ultra small: install the smallest 4-in-1 sensor anywhere without ruining the view. It attaches to any flat surface with a single screw or a piece of....
  • You're covered: this is a z-wave plus certified and ul listed device created and built in Europe from quality materials. Support portal and....
Check Stock

Aeotec Multisensor 6 Z-Wave Plus 6-in1 motion temperature humidity light UV vibration sensor

  • 6-in-1 Z-Wave Plus MultiSensor: motion, humidity, temperature, light lux, UV, vibration sensor..
  • Super-small at 1.8 inches. Can be installed in corner, in-wall, on shelf or in downlight..
  • Works with certified Z-Wave gateways and tested with Fibaro, Indigo 7, openHAB, SmartThings, Vera..
  • Z-Wave Plus certified. Certification number: ZC10-15070011.
Check Stock

Zooz Z-Wave Plus S2 Motion Sensor ZSE18 with Magnetic Mount, Works with Vera and SmartThings

  • EXTRA FEATURES: Adjustable motion sensitivity and retrigger time. Built-in Z-Wave range test tool for easier network troubleshooting. Vibration reports on SmartThings and other selected gateways..
  • 2 POWER SOURCES: Runs on a single battery for up to a year (depending on traffic and settings) OR on micro USB cable (NOT INCLUDED). Acts as signal extender when connected to USB..
  • FLEXIBLE DESIGN: Extremely small and light, the sensor sits in a perfectly shaped magnetic mounting base for precise and firm positioning..
  • CERTIFIED SECURE: Uses the latest S2 Z-Wave protocol and AES-128 signal encryption. Z-Wave Plus chip for longer range and increased battery life..
Check Stock

Aeotec Range Extender 6, Z-Wave Plus repeater

  • Z-Wave Plus wireless signal repeater and range extender. Compatible with Z-Wave and Z-Wave Plus..
  • Amplifies and repeats weak signals boosting the range and reliability of weak Z-Wave devices..
  • Plug in to 110 volt wall socket. Small design so it does not block other outlets.
  • Compatible with all Z-Wave gateways including Control4, Fibaro, SmartThings, and Vera..
  • Z-Wave Plus certified. Certification number: ZC10-16095239DescriptionYou use Z-Wave to manage your smart home. You use Range Extender 6 to keep Z-Wave reliable. Aeotec's Range Extender 6 works seamlessly to amplify and repeat weak Z-Wave and Z-Wave Plus signals. Simply plug it into a power socket, connect it to your Z-Wave network, and it automatically starts improving any poor Z-Wave signals that are in range. As it's custom desgined as a wireless signal booster, Range Extender 6 performs better than other Z-Wave devices that offer simply repeating.
  • it amplifies the signal too. Designed to use Z-Wave Plus, unlike previous editions Range Extender 6 can work with advanced Z-Wave features such as encryption and security devices such as door locks while remaining compatible with older versions of Z-Wave. It repeats signals 250% faster than other signal repeaters and can repeat Z-Wave signals up to 492....
Check Stock