ReviewsZ Wave Wireless Outdoor Camera

EATON RF9642-ZDRB Z-Wave Plus Accessory Dimmer, Oil-Rubbed Bronze

Wireless accessory for Eaton’s Z-Wave Plus Universal Smart Dimmer (RF9640-N).
Ideal for applications where no traveler wires exist for 3-Way & multi-location control.
Supports Z-Wave Plus technology including S2 Security certification for advanced encryption & cyber-security.
Can be associated with (5) other Z-Wave Plus devices when used with a compatible Z-Wave controller.

Check Stock

ENERWAVE Z-Wave Plus Relay, Hidden Smart Switch Wireless Remote Control to Lights and Ceiling Fans, 120-277VAC, 10A, Neutral Wire Required, ZWN-RSM1-PLUS, Black

Z-Wave micro switch installs behind an existing wall switch to upgrade it into a Z-Wave switch. Upgrade home automation system while keeping your original switches.
Wirelessly control your appliances (lights, fans) from an internet-connected smartphone, tablet, or computer.
Utilizes Z-Wave Plus featuring improved battery life, wireless range, increased bandwidth.
Acts as a Z-Wave repeater to extend the range of Z-Wave signal up to 100ft.
the switch will still work if the module fails.
Z-Wave hub and neutral wire required. Single Pole, 120-277 VAC, 50/60Hz, Up to 150ft Range, 10, 000mA (10A) Maximum Load, 908. 42MHz, Slim Design - Dimensions: 1. 63" x 1. 63" x 0. 82". FCC and ETL listed. 1-year.

Check Stock

Zwave Door Sensor Aeotec Recessed Door Sensor 7, Z-Wave Plus Enabled Smart Door Sensor Battery Powered, SmartStart S2, Zwave Hub Required SmartThings Fibaro Home Centre 3 Hubitat

Safer than the previous z-wave recessed sensor. Come with z wave security 2 (S2) framework which is the most advanced security for smart home zwave devices and controllers, z-wave gateway and zwave hub in the market today, it’s better to protect your family.
Anytime and anywhere, it’s great wireless door sensors for security. Smart hubs compatible with z-wave hub Samsung SmartThings, Wink, HomeSeer HS3, Hubitat, ISY994i, Open Z-Wave, Domoticz and more. Frequency: 908.40 MHz, 916.00 MHz.
Take your home under zwave controller. Open close sensor zwave Optimized to use up to 66% less battery power to communicate than previous generations. 3 year+ battery life powered by 1 x 1/2 AA battery. Battery included. Never worry about missing any important moment or running out of battery.

Check Stock

GoControl Z-Wave Wall Dimmer Switch, 1000W - WD1000Z-1

Wireless 1,000W z-wave wall dimmer switch offers both z-wave & manual control for connected lights.
Linear-only Auto sense feature allows for Local lamp activation Independent of the z-wave controller status.

Check Stock

Minoston Z-Wave Plug with Energy Monitor, 700 Z-Wave Outlet Switch, Z-Wave hub Required, Work with SmartThings, Wink, Vera(MP31ZP)

This Z-Wave smart plug is compatible with those Z-Wave hub: SmartThings, Vera, Fibaro, Homeseer. ALEXA & GOOGLE ASSISTANT COMPATIBLE (requires a Z-Wave certified hub). CANNOT connect directly with ECHO PLUS！Z-Wave Frequency: 908.42MHz. FCC & ETL listed..
Energy Efficient: Z-Wave outlet comes equipped with energy monitoring capability. Monitor use and Save on bills. Enjoy a more efficient home..
Timer schedule: Control lights and application to come on or turn off via a schedule at certain times of the day to reduce your electricity bill, set up custom scenes with other devices enrich intelligent life..
Wireless control: A large range of types of load are supported to be wirelessly controlled like lamps or small appliances from anywhere and any time by your mobile devices. Home automation is from a little Z-Wave Plug to control small appliances that you want. Overcurrent protection, when the loading is over 15A, the device wil turn off!.
Easy to Setup: No wiring required. Simply plug in the device to a wall outlet and connect to your hub for convenient ON/OFF functions. Space-saving design leaves the top second outlet free for continued use. Z-Wave Frequency: 908.42MHz..

Check Stock

EATON RF9640-NWS Z-Wave Plus Universal Dimmer, White Satin

Replaces standard switch to add local and wireless control.
Compatible with most common residential lighting loads including LED, CFL, INC, MLV, ELV, HAL.
Single pole and 3-Way control: Use with Z-Wave Plus Accessory dimmer RF9642-Z.
Features 7 step blue load indicating LED light that can be dimmed in ON or OFF state.
Supports Z-Wave Plus technology including S2 Security certification for advanced encryption & cyber-security.
Voice and app-based control when used with compatible Z-Wave controller.

Check Stock

Zooz Z-Wave Plus S2 Outdoor Motion Sensor ZSE29

OUTDOOR SENSOR: Introducing the first Z-Wave motion detector created for outdoor use. Monitor activity remotely through your Z-Wave hub (required, sold separately) and automate outdoor lighting based on motion. Keep away from direct rainfall and sunlight..
EASY TO INSTALL: Add it to your system quickly through auto-inclusion and mount it in minutes with just a couple of screws. Power it with batteries (included) or micro USB (cable + adapter sold separately). Program motion time-out and light level trigger by turning the knobs right on the sensor. New version (2.0) comes with advanced settings for motion sensitivity and lux reports if supported by your hub. Motion detection up to 20 feet..
COMPATIBILITY: The sensor works great on HomeSeer, Hubitat, Fibaro, and Vera. Custom device handler needed for SmartThings (go to Zooz support portal or contact seller for instructions). Does NOT work with Wink, Ring, ADT, or other Z-Wave alarm panels. Alexa is NOT a Z-Wave hub (the sensor won't work directly with Echo)..
SECURITY: Equipped with the latest authenticated S2 security protocol for encrypted signal and hacker-proof smart home (NOTE: your Z-Wave hub needs to support S2 for this feature to work). Tamper protection and low battery alerts for your peace of mi....

Check Stock

GE Enbrighten Z-Wave Plus Smart Outdoor Switch, 1-Outlet Plug-In (2nd Gen.), Weather-Resistant, Works with Alexa, Google Assistant, for Landscape & Seasonal Lighting, ZWave Hub Required, 14298,Black

Weatherproof Impact- and weather-resistant housing withstands the elements for outdoor placement. The grounded outlet faces down with the switch is properly mounted to be protected from rain and debris..
Manual operation A convenient ON/OFF button on the switch housing allows manual control of the connected device..
Optional LED An integrated LED indicator illuminates to show switch status and can be reversed, turned off or always on based on your indicator preferences..
Voice control Enjoy the convenience of voice control with Google Assistant or Amazon Alexa when connected through a compatible Z-Wave hub..
Convenient design reduced size from previous outdoor plug-in Z-Wave switches and blends into any setting while the high-quality drop cable is ideal for use with covered outdoor outlets. Dual keyhole brackets offer secure, simple installation options..
Range extender The switch repeats your Z-Wave signal from your hub or other Z-Wave device to extend your range by up to 150ft. Extended signal range increases your home automation coverage to enhance your control..
LED, CFL, incandescent and halogen The smart switch is compatible with all types of light sources. Enjoy the full benefit of LED, CFL, incandescent and halogen lights..

Check Stock

Minoston Z-Wave Switch On/Off Toggle Wall Light Switch Works with SmartThings, Wink, Support 3-Way Installation, Signal Repeater, Required Z-Wave Hub, White(MS12Z)

Voice Control: This Z-Wave smart toggle on/off switch is compatible with Alexa Echo and Google Home. REQUIRES AN ALEXA SUPPORTED HUB for voice control with Echo Products. CANNOT connect directly with ECHO PLUS..
Z-Wave certified gateway: The MS12Z is compatible with Samsung Smartthings, the Wink Hub, and all certified Z-Wave controllers..
Work with: This Z-Wave enabled universal switch works for most residential lighting control. It supports LED, CFL,incandescent and halogen bulbs. Supported voltage - 120 VAC..
Wireless control: Turn lights on/off, schedule, or group the light from multiple switches all with a smartphone app, automatically turn lights on when you are home, and off when you are away..
Installation Requires: hard-wired connections. Neutral wire required for single-pole and 3-way installation Ca This Z-Wave switch works w/existing (dumb) switch for a 3-way wiring scenario..

Check Stock

HomeSeer HSM200 Z-Wave Motion, Temperature and Light Sensor with RGB LED Indicator

Z-WAVE PLUS MULTISENSOR: Reports Motion, Temperature, Light Levels With Wireless Z-Wave Commands.
ANNUNCIATOR: RGB LED May Be Programmed To Glow 7 Different Colors When Things Happen In Your HomeSeer Controlled Smart Home.
LINE POWERED: Just Plug It Into Any 120-Volt US Style Receptacle | No Batteries To Replace.
WORKS AS REPEATER: Expands The Range And Performance Of Your Z-Wave Network.
COMPATIBILITY: Works with HomeSeer, Hubitat, Home Assistant and SmartThings (with HomeSeer Edge Driver). NOT FOR USE WITH Wink or Vera..

Check Stock

SCHLAGE FE599NX Camelot by Accent Keypad Entry with Z-Wave with 16086 Latch 10027 Strike Lifetime Brass Finish

Works with Alexa for voice control (hub required, Alexa device and hub sold separately)..
Receive text or email alert when your family uses their codes, so you know who's home.
Grant access to your home when you can't be there with a scheduled code to let someone.
Add, delete or change user codes remotely.
Run the most important systems in your home-thermostats, locks, lights and cameras from anywhere with Nexia Home Intelligence.
This Z-Wave enabled product communicates wirelessly to other Z-Wave products in your home.
remote management with a Nexia Home Intelligence system.
This Z-Wave enabled product allows for wireless communication to other Z-Wave products in your home.
Door range: 1-3/8 to 1-3/4 (35mm-44mm) standard.

Check Stock