ReviewsZero Phase Current Transformer

ATO 1 hp VFD, 4A 0.75kW 120V Input 220V Output, Single Phase to 1phase/3phase Variable Frequency Drive, for AC Motor Speed Control

ATO 1 hp 110v VFD, 0.75 kW single phase 110v/120v input, single phase or three phase 220v output variable frequency drive. Running your 1 phase/3 phase motors on 120 volt supply via ATO VFD.
Input voltage: 1 phase 120V AC ±15%, Input frequency: 50Hz/60Hz, Output voltage: 1 phase or 3 phase 220V AC ±15%, Output frequency: 0.00~400.00Hz.
【APPLICATION】: ATO 110V Variable frequency drive can be widely applied to drive the AC motor, such as fans, pumps, power tools, etc..
【TIPS】: Choose a VFD base on motor rated current: VFD output current ≥ motor rated current.
【CUSTOMER FIRST】If you are not sure about the size or have any issue about the product or service, please don't hesitate to email us. We will answer you within 12h.

Check Stock

LiteFuze LT-5000 5000 Watt Voltage Converter Transformer - Step Up/Down - 110V/220V - Circuit Breaker Protection [5-Years Warranty]

NOTE: This converter is designed only for European/Asian 220V (Single Phase) , it will not Work with American 220 (Dual Phase).
Up to 5000 Watt Maximum Capacity, Heavy Duty Step Up/Down Voltage Converter Transformer (110/120V 220/240V).
Circuit Breaker Protection, convertingbox Technology (Lighter Weight & Noise Reduction), Thick Industrial Heavy Grade Cord Multiple Sockets....
Weight: 29.25 lbs, Dimensions: 8.75" x 6.75" x 12.00", CE Certified. Limited 5 Year Warranty.
Efficiency Factor of 1.25x. Make sure you multiply the wattage of your appliance by 1.25 and get a transformer bigger than that..

Check Stock

Transformers Connections: Distibution of electric energy using one-phase transformers (Distribution of Electric Energy)

Special attention: the maximum power of the transformer cannot exceed 10W.Input voltage: 110V / 50//60Hz(Red),Output voltage:12V 10VA(Blue). The input line is two red lines, and the output line is two blue lines. This transformer is only used for AC to AC.
Product name:Power Transformer,Structure: single phase transformer..
Total Size: 75x44x42mm/2.9''x1.7''x1.6''(L*W*H). wires length: 18cm/7.1''. Weight: about 360g..
Wide range of uses: power transformers can be used in voltage transformation occasions such as audio and lighting power supplies..
Product package:1xPower Transformer .If there is any problem with the switch you received, please contact me by email in time and I will reply you within 24 hours..

Check Stock

3-Phase Voltage Monitoring Relay AC 220-440V Phase Sequence Protection Small Size Protection for Industry Applications

Dynamic phase loss, static phase loss protection: refers to the phase failure of any phase when the protected device is in the running state or non-operating state. The indicator light is in the form of red light and priority.
Wrong phase protection: A protection measure to prevent the phase sequence of L1, L2, L3 three-phase AC power supply from being connected incorrectly. Instant action. The indicator light is in the form of yellow light..
Voltage Unbalance Protection: Refers to a voltage imbalance that will affect the safe operation of the device. When the voltage imbalance rate is higher than 8%. The form of the indicator light is: the lack of phase red light is on, and priority..
Delay protection: When there is a fault, the monitor will delay after 1~2 seconds, and the relay will release..
The protection function of the monitor is not affected by the current of the line or load, the inrush current, the unbalanced current and the nature of the load. Long-term work with full performance and full climate. Power consumption is no more than 2W..

Check Stock

Voltage Monitoring Relay Phase Sequence Protection TG30S Phase Sequence Relay 3-Phase Mini for Industry Applications

Dynamic phase loss, static phase loss protection: refers to the phase failure of any phase when the protected device is in the running state or non-operating state. The indicator light is in the form of red light and priority.
Wrong phase protection: A protection measure to prevent the phase sequence of L1, L2, L3 three-phase AC power supply from being connected incorrectly. Instant action. The indicator light is in the form of yellow light..
Voltage Unbalance Protection: Refers to a voltage imbalance that will affect the safe operation of the device. When the voltage imbalance rate is higher than 8%. The form of the indicator light is: the lack of phase red light is on, and priority..
Delay protection: When there is a fault, the monitor will delay after 1~2 seconds, and the relay will release..
The protection function of the monitor is not affected by the current of the line or load, the inrush current, the unbalanced current and the nature of the load. Long-term work with full performance and full climate. Power consumption is no more than 2W..

Check Stock

Simran Power Converter Regulator Stabilizer with 110 Volt - 220/240 Volt Built-in Voltage Transformer, 20,000W (AR-20000)

20,000 Watt Regulator with built-in 110v-240v voltage transformer. Note this transformer will not work with 2-Phase 220/240 Volt power.
Converts 110/120V to 220/240V or converts Single Phase 220/240V to 110/120V. Compatible with 50hz/60hz.
This stabilizer can regulate big range fluctuating voltage into general voltage output.
Input voltage AC 75V-130V or 180V-260V. Output voltage: AC 110v+-4% or ac220v+-260v.
5 outlets on front of unit (accept US plugs and 2 prong Euro plugs). on/off switch. Thermal fuse - protects damage to your valuable equipment. Comes with terminal connectors - hardwire input required.

Check Stock

Cafurty 1N4007 DO-41 Axial Silastic Guard Junction Standard Rectifier Diode (Pack of 20)

☞ Model: MDQ-100A is designed for single phase Full wave rectification, which has four diodes connected in a one phase bridge configuration..
☞ Max. Average Forward Rectified Current : 100A.
Production Size: 80 x 40 x 32mm/ 3.1" x 1.6" x 1.2" (L*W*T).
package content: 1 x rectifier bridge 1 net weight: 130g.
package content: 1 x rectifier bridge radiator.
☞ Applications: DC power supply for instrument equipment , Input of PWM frequence converter rectifying power supply , Excitation power supply for DC motor, Input of switch power supply and auxiliary current Inverter current..

Check Stock

Voltage Monitoring Relay Protection 3-Phase AC 220-440V Small Size Phase Sequence Protection Phase Sequence Relay for Industry Applications

Dynamic phase loss, static phase loss protection: refers to the phase failure of any phase when the protected device is in the running state or non-operating state. The indicator light is in the form of red light and priority.
Wrong phase protection: A protection measure to prevent the phase sequence of L1, L2, L3 three-phase AC power supply from being connected incorrectly. Instant action. The indicator light is in the form of yellow light..
Voltage Unbalance Protection: Refers to a voltage imbalance that will affect the safe operation of the device. When the voltage imbalance rate is higher than 8%. The form of the indicator light is: the lack of phase red light is on, and priority..
Delay protection: When there is a fault, the monitor will delay after 1~2 seconds, and the relay will release..
The protection function of the monitor is not affected by the current of the line or load, the inrush current, the unbalanced current and the nature of the load. Long-term work with full performance and full climate. Power consumption is no more than 2W..

Check Stock

TG30S Mini AC 220-440V Voltage Monitoring Relay Phase Sequence Protection Protection 3-Phase Phase Sequence Relay for Industry Applications

Dynamic phase loss, static phase loss protection: refers to the phase failure of any phase when the protected device is in the running state or non-operating state. The indicator light is in the form of red light and priority.
Wrong phase protection: A protection measure to prevent the phase sequence of L1, L2, L3 three-phase AC power supply from being connected incorrectly. Instant action. The indicator light is in the form of yellow light..
Voltage Unbalance Protection: Refers to a voltage imbalance that will affect the safe operation of the device. When the voltage imbalance rate is higher than 8%. The form of the indicator light is: the lack of phase red light is on, and priority..
Delay protection: When there is a fault, the monitor will delay after 1~2 seconds, and the relay will release..
The protection function of the monitor is not affected by the current of the line or load, the inrush current, the unbalanced current and the nature of the load. Long-term work with full performance and full climate. Power consumption is no more than 2W..

Check Stock

Mini AC 220-440V TG30S Phase Sequence Protection Voltage Monitoring Relay Voltage Phase Protective Relay Building Electronics Projects for Industry Applications

Dynamic phase loss, static phase loss protection: refers to the phase failure of any phase when the protected device is in the running state or non-operating state. The indicator light is in the form of red light and priority.
Wrong phase protection: A protection measure to prevent the phase sequence of L1, L2, L3 three-phase AC power supply from being connected incorrectly. Instant action. The indicator light is in the form of yellow light..
Voltage Unbalance Protection: Refers to a voltage imbalance that will affect the safe operation of the device. When the voltage imbalance rate is higher than 8%. The form of the indicator light is: the lack of phase red light is on, and priority..
Delay protection: When there is a fault, the monitor will delay after 1~2 seconds, and the relay will release..
The protection function of the monitor is not affected by the current of the line or load, the inrush current, the unbalanced current and the nature of the load. Long-term work with full performance and full climate. Power consumption is no more than 2W..

Check Stock

ELC T-5000 5000-Watt Voltage Converter Transformer - Step Up/Down - 110V/220V - Circuit Breaker Protection [3-Years Warranty]

Up to 5000 Watt Maximum Capacity, Heavy Duty Step Up/Down Voltage Converter Transformer (110/120V 220/240V).
NOTE: This converter is designed only for European/Asian 220V (Single Phase) , it will not Work with American 220 (Dual Phase, Not designed for US....
Dual Circuit Breakers Protection for Each Voltage (120V & 220V) 2 x 110V Socket, 1 x Universal 220V Socket, Weight: 21 lbs., Dimensions: 10.25" x 8" x....
MAX - 5000 Watt for 30 Mins Use. For continuous use: 2500W. Make sure you multiply x2 the wattage of your item and get a transformer bigger than that.
WARNING: We do not recommend for high wattage heat producing items such as Coffee Maker, Expresso Machine, Toaster & Welding Equipment ETC.

Check Stock