ReviewsZinc Die Casting Mold

Simond Store 2 Part Cast Iron Flask Mold and 2 Piece Aluminum Ring Making Mold for Sand Casting, Jewelry Making Casting Tool for Delft Sand Clay Petribond Casting

  • Material: These pair of Sand Casting Flask Mold and Ring mold are highly durable and robust. Traditional Jewellers Metal Casting Flask Mold are made of cast iron and Ring Mold is made of aluminum material..
  • Cost Effective: These casting mold are extremely price effective thanks to low tooling and equipment cost.
  • Neat and Easy Alignment: Correct alignment of flask mold frames is feasible with four locating pins which hold the frames firmly..
  • Applications: It permits you to simply duplicate shapes, metals, coins, rings, jewelry items, and other complex shapes with ease..
  • Ample Scope: Ideal to be used with Petro bond, Delft and Sand Casting Clay and metals like Gold, Silver, Copper, Brass etc.
Check Stock

Mold Star 15 SLOW - 1A:1B Mix By Volume Platinum Silicone Rubber - Pint Unit

  • Tear Resistant - Mold Star silicones cure to soft, strong rubbers which are tear resistant and exhibit very low long term shrinkage *Packaging may vary*.
  • Heat Resistant - Cured Mold Star rubber is heat resistant up to 450°F (232°C) and is suitable for casting low-temperature melt metal alloys.
  • Curing - Allow Mold Star 15 SLOW silicone rubber to cure for 4 hours at room temperature (73°F/23°C) before demolding..
  • Vacuum Degassing - Although not necessary, vacuum degassing helps eliminate any entrapped air in pourable silicone rubber.
  • Mold Performance - The physical life of the mold depends on how you use it (materials cast, frequency, etc.). Casting abrasive materials such as concrete can quickly erode mold detail, while casting non-abrasive materials (wax) will not affect mold detail. Before storing, the mold should be cleaned with a soap solution and wiped fully dry. Two part (or more) molds should be assembled. Molds should be stored on a level surface in a cool, dry environment.
Check Stock

Alzassbg Single Front Door Knocker Satin Nickel 6.2 Inch Door Hardware Door Knockers for Front Door AL8200SN

  • High Quality Satin Nickel Finish. Zinc Alloy Die Casting..
  • Polybagged with Mounting Screws Included..
Check Stock

Ice Cream Stick Mold, Stainless Steel 40Pcs/Pan Spiral Popsicle Mold Ice Lolly Popsicle Frozen Pop Molds with Stick Holder DIY Homemade, Commercial

  • ✤【Stainless Steel Popsicle Molds】Made of high quality stainless steel. Each Mold Size: 32*29*125 MM/1.26" x 1.14" x 4.9". Our stainless steel ice pop maker also helps freeze ice pops faster than plastic or silicone..
  • ✤【Features】Fast freeze mold is easy to use, easy to clean, and will last you a life time.[note: Spiral cup mold popsicles must use a round stick because a flat stick cannot rotate the popsicle and will make it difficult to pull out the mold.]].
  • ✤【40Pcs/Pan】It can make 40 pieces spiral popsicle one time, You can DIY popsicles made of milk, milk powder, sugar, fruit, red beans, mung beans, glutinous rice and fruit juice. Best gift for both adults and kids..
  • ✤【Classic Design】Robotic precision welding, seamless die casting and the cute shapes will bring more fun to your family..
  • ✤【Perfect Choose】 Simply hold the mold in your hand for a moment, or run under warm water briefly, release quickly. It’s the perfect family bonding experience for you and your little ones to spend time together in the kitchen and make new memories they’ll look back on fondly..
Check Stock

2 Pieces Resin Ring Molds Silicone Ring Molds Assorted Sizes Ring Casting Mold Resin Casting Circle Jewelry Molds with Syringe in 20 ml for DIY Craft Ring Making

  • Quality material: the rings resin casting mold is made of silicone, soft, flexible and durable, heat resistant from -40 to 230 °C / -40 to 446 °F.
  • Features transparent appearance, you can check the casting process at any moment.
  • How to use: just pour the melting resin into the casting mold and fill to the top, and wait for the cold process, then pop up your design, no need extra cutting and edging, silicone mold with toughness, simple to remove the ring from the mold.
  • DIY your own rings: you can add glitter, dried flowers, colored beads, sequins, trinkets or decorations to the silicone mold and to make your ring even more personalized, nice DIY ring jewelry tools for crafts making lovers.
  • Package quantity: package comes with 2 pieces resin ring molds (rings not includes) and 1 piece syringe in 20 ml, each silicone ring mold contains 14 ring holes in different sizes, which can satisfy your multiple crafts making.
  • Please note the ring finished products on the picture are not included.
Check Stock

ProForm 141-930 Valve Cover, Slant-Edge, Tall, Baffled, Breather Hole, Recessed Chevrolet Bowtie Logo, Aluminum, Chrome, Small Block Chevy, Pair

  • Die Casting w/Generous Internal Clearance.
  • Package Dimension : 52.577 cms L x 27.177 cms W x 12.192 cms H.
Check Stock

Baby Alginate Molding Powder Replacement - Refill for Baby Hand & Baby Feet Mold Casting Kit- (Step 1 & 2) - Perfect for Baby Keepsake Items, Gifts, & Family Activities - Create-a-Mold by Luna Bean

  • LUNA BEAN BABY PRINT KIT REFILL: Baby hand and footprint kit refill Includes 1 bag of Step 1 Molding Powder & 1 bag of of Step 2 Casting Stone. Basic mixing directions printed on the bag. Creates 1 casting..
  • FAST FOOT & HAND CAST REFILL: Make another baby foot print with a Luna Bean hand casting kit refill. Simply mix, mold, cast, and peel away. Average time is 6-8 minutes. [The exact time is dependent upon water temperature & water amount.]Preserve every precious detail, even fingerprints! It's simple, fast and fun..
  • EASY PLASTER HAND MOLD CASTING KIT: Our hand mold kit refill makes casting kits for families of all ages easy and fun! Comes with bolder color-changing properties, you can follow the instructions more easily as the color changes from pink to white as it sets. The amazing rubbery mold will capture tiny toenails, fingernails and dimples even if baby wiggles!.
  • 100% SAFE BABY FOOTPRINT KIT REFILL: Get more from your baby foot printing kit baby keepsake refill with non-toxic and hypo-allergenic molding material. Fun & easy no-bake drying that' 100% safe. The alginate molding material is Luna Bean's highest quality custom "Create-A-Mold." It has more working time, forms a stronger mold, provides better detail, and has bolder color changing prope....
Check Stock

Snaps Rivet Grommet Prong Eyelet Popper Fastener Self Cover Fabric Button Hand Press Machine Set

  • [Handpress Machine] Universal Hand Press Machine for grommets, snap buttons, rivets, fabric covered buttons.
  • [Snap Button Dies] 1 set of die for 10 mm 'S' spring press fasteners type VT2 (includes 4 pieces) 1 set of die for 12,5 mm 'S' spring press fasteners type T54 (includes 4 pieces) 1 set of die for 15 mm 'S' spring press fasteners type Alfa (includes 4 pieces) 1 set of 9.5mm Perforated prong snap button fastener button tool/die (includes 2 pieces).
  • [Rivet Dies] 1 set of 7mm Rivet Die/Mold (includes 2 pieces) 1 set of 9mm Rivet Die/Mold (includes 2 pieces).
  • [Grommet Eyelets Dies] 1 set of 5.4mm Grommet/Eyelet Die/Mold (includes 2 pieces) 1 set of 7.5mm Grommet/Eyelet Die/Mold (includes 2 pieces) 1 set of 9mm Inner Diameter Grommet/Eyelet Die/Mold (includes 2 pieces).
  • [Hole Puncher] 1 piece 2mm Hole Puncher 1 piece 4mm Hole Puncher 1 piece brass base for a hole cutter.
Check Stock

Golf Divot Repair Tool Sneakers Style Golf Green Fork Ball Marker 2 PCS

  • Die-casting Divot tool is made of sturdy zinc alloy..
  • A Great little divot tool, Perfect size to fit easily in a pocket..
  • Novel design divot repair tool, good grip, easy to use..
  • Great gift idea for golfers. Every golfer should have one of these in the bag..
  • Protected By Kakuru No-Hassle Lifetime Replacement..
Check Stock

Graphite Ingot Mold Silver Ingot Mould Gold Casting Ingot Crucible Mold for Melting Casting Refining Gold Silver Metal Aluminum Copper Brass (40 x 40 x 45 mm, 1000 g Gold/ 500 g Silver)

  • Size information: the outside dimension is 50 x 50 x 50 mm and the inner is 40 x 40 x 45 mm, the capacity is about 1000 g gold or 500 g silver, general size can meet your most melting or casting needs for metals.
  • Durable material: the main material is graphite, hardly ash content ensures that the metal purity will not be affected during the metal refining process.
  • Fast cold and hot conditions, with good thermal stability, exquisite refining effect.
  • Nice performance: our casting ingot crucible mold has nice thermal conductivity, which can highly shorten the melting time and save energy, and withstand 2000 degrees Celsius, nice acid and alkali resistance, nice corrosion resistance, impact resistance, 89 MPA compression resistance, and 48.7 MPa flex resistance, nice impact resistance performance to ensure the reliability of product quality.
  • Wide uses: this ingot mould is suitable for experiments and melting of non-ferrous metals, such as gold, silver, brass, copper, aluminum zinc, lead and so on, also can be applied as graphite crucible melting into non-ferrous metals, test analysis, as the ingot mold and other purposes.
  • Taking the size of the product into account, small-capacity metal melting are more suitable.
  • Package contents: you will get 1 piece of gra....
Check Stock

Polytek Pol-Ease 2500 Release Agent (12oz. Can)

  • Can be washed off models and castings if they need to be painted.
  • For Mold Making: Apply to non-porous or sealed models when making silicone rubber molds (not recommended for use with liquid polyurethane rubbers)..
  • Apply to silicone rubber molds when casting liquid silicone rubber.
  • To extend mold life, apply to silicone molds when casting materials such as polyurethane plastics, rubbers or epoxies (release agent is not needed for this process, but can extend mold life).
  • Apply to polyurethane molds before casting polyurethane liquid plastics.
Check Stock