ReviewsZinc coated Exhaust Clamp

EVIL ENERGY Exhaust Clamp,Narrow Band Muffler Clamp Stainless Steel 2.5 Inch,2Pcs

  • Size: joins 2.5inch OD-ID slip fit pipe, width of strap: 1.22inch /31mm..
  • Application: Narrow Band clamp is a simple, effective way to connect exhaust system components such as pipes, mufflers, catalytic converters etc..
  • Advantage: No welding design, easy to install or remove. It is recommended that put exhaust sealant on the pipes before installation..
  • Material: 304 stainless steel band, zinc-plated M10 bolt and nut, steel gasket, aluminum alloy I-block..
  • Feature: The band clamps make the force of 360 evenly distributed to provide a seal. Torque: 63 N·m..
Check Stock

Roadformer 5 inch Exhaust Clamp - Lap Joint Exhaust Band Clamps Preformed Stainless Steel (2 Pack)

  • 5" exhaust clamp is to joint 5" OD overlapping into 5" ID. Stainless Steel Band in the width of 3 inch/76 mm, using 12.9 degree high-strength fasteners.
  • Lap joint exhaust clamp is fast, easy and accurate installation, and minimize noise and exhaust gas leak, protect exhaust ends from damaged when fastening.
  • The stepped band stainless steel is tested over 100 hours salt spray to ensure the great performance in anti-corrosion with superior product quality in durability and reliability.
  • Designed 360-degree full clamping area to create overall sealing without distorting exhaust pipe, exhaust muffler ends and exhaust tubing in exhaust system connections.
  • Exhaust clamp will come with plastic sticker to protect the band.
  • you can use with it or you can remove the protection sticker off before using.
Check Stock

Roadformer 2.5" Lap Joint Exhaust Band Clamp Preformed Aluminized Steel

  • Roadformer 2.5" exhaust clamp is to joint 2.5" OD pipe overlapping into 2.5" ID pipe. It is fast, easy and accurate installation, also minimize noise and exhaust gas leak. The lap joint Clamp is widely used in exhaust system of Automotive, Commercial Vehicle and off high way industry..
  • This stepped exhaust band clamp is made in high quality standard and using 12.9 degree high-strength fasteners to provide truly sealing force.
  • Designed 360-degree full clamping area to create overall sealing without distorting exhaust pipe, exhaust muffler ends and exhaust tubing in exhaust system connections.
  • Our Innovation reaction block technology offers great protection without exhaust ends be damaged when fastening. The band steel is tested over 100 hours salt spray to ensure the great performance in anti-corrosion with superior product quality in durability and reliability.
  • Roadformer is dedicated in providing real value to our customers and end users. We set industry quality standard.
Check Stock

SYKRSS 3 Stainless Steel Butt Joint Narrow Band Exhaust Seal Clamp with 1 Block

  • Application: Seal exhaust clamp is the muffler repair parts, narrow strap clamp can be used for Catalytic Converter, Exhaust Tips, Exhaust Manifold,....
  • Universal fitment, Joins 3.0" OD pipe to 3.0" ID pipe, There are 5 sizes for choose, it can meet your various needs. Please measure the size of your....
  • The narrow band clamp add the mild steel semi-circular gasket parts, it can hold the pipe tightly without loosening. The I-shape block again enhances....
  • Easy to remove and install, the exhaust band seal clamp chose the design of flexible bolt and nut structure. can easily disassemble and install them.....
  • SYKRSS value your shopping experience, If you encounter any problems in installing the 3.0" narrow band clamp, you can feel free to contact us via....
Check Stock

Roadformer 3' Butt Joint Exhaust Band Clamp - Aluminized Steel for 3' OD Exhaust Pipe, Muffler, Elbow and Exhaust Tubing Connection

  • PREMIUM QUALITY STANDARD – 3" butt joint exhaust clamp is made in high quality standard. This band clamp is used for 3" OD exhaust ends connection.
  • REAL SEALING CAPABILITY – Roadformer 3" exhaust band clamp is in 12.9 degree high-strength fastener providing real sealing capability of leak free.
  • INNOVATION TECHNOLOGY - Our Innovation reaction block technology offers great protection without exhaust ends be damaged when fastening, Pre-attached hardware provides fast, easy and accurate installation.
  • DURALITY & RELIABILITY - Roadformer clamps band steel is tested over 100 hours salt spray to ensure the great performance in anti-corrosion with superior product quality in durability and reliability.
  • FULL CLAMPING AREA - Designed 360 degree full clamping area to create overall sealing force without distorting exhaust pipe, exhaust muffler ends and exhaust tubing in exhaust system connections.
Check Stock

SEUNMUK 4 Pack 2.5 Inches Exhaust Clamp Sleeve, Stainless Steel Butt Joint Band Clamp Exhaust Coupler Exhaust Band Clamp Sleeve for 2.5-Inch OD Exhaust Pipes, Mufflers

  • ROBUST CONSTRUCTION - The stainless steel exhaust clamp is high-quality 304 stainless steel material, well polished with smooth mirror finish and high strength, which is solid and durable to last and can be reused for a long time..
  • EASY TO JOINT - No welding design, the joint exhaust band clamp features a practical components including bolts, nuts and I-block, you can easily mount or disassemble them, and you can also wrap some exhaust heat tape to enhance complete sealing..
  • TIGHT SEALING - Uniform distribution of clamping force will not crush the pipeline, which can provide tight seal and keep off exhaust and noise leakage. The exhaust band clamp sleeve can close fit on the exhaust pipes or mufflers..
  • PRACTICAL AND MULTIPURPOSE - 4 packs of joint exhaust muffler clamps is designed with 2.5-inch diameter and 3 inches length, which fits for exhaust pipes or mufflers, manifolds, catalytic converters of that with an outer diameter of 2.5 inches..
  • SATISFACTORY SHOPPING EXPERIENCE - If you have any dissatisfaction with exhaust clamp 2.5 inch, you will get a full refund within 30 days. If you have any questions about the product, please feel free to contact us, we will provide you with a satisfactory solution..
Check Stock

-2 Pack- 90° bend Universal Weld In Place Exhaust Hanger Rod - MADE IN THE USA

  • Our Universal Exhaust Hangers Are A Versatile And Convenient Option For Custom Exhaust Systems Or Original Replacements. These Hangers Can Be Easily Adjusted To Fit A Wide Range Of Exhaust Pipes, Making Them A Perfect Fit For Custom Exhaust Setups Or Replacing Worn Or Damaged Original Hangers..
  • MADE IN THE USA - Superior Quality Steel For Excellent Welds.
  • The Double Ribbed Design Helps To Keep The Hanger Aligned And In Place, Preventing It From Slipping Or Shifting On The Rubber Insulator. The Added Ribbing Provides Extra Stability And Support, Ensuring That Your Exhaust Remains Securely In Place..
  • Mild Steel - Zinc Coated For Corrosion Resistance.
Check Stock

POWERTEC 20308 J Hook Toggle Clamp 451 w Hook Type Draw Latch Pull Action – 375 lb Holding Capacity, 1PK

  • INCLUDES: (1) J-Hook Type Toggle Clamp 451 type.
  • FUNCTION: An essential clamping tool that utilizes a hook type draw latch for straight-pulling action – perfect for table saw stand attachments, racks, gates, smoker lids, creative automotive functions and woodworking projects.
  • BUILD: Made with heavy duty, highly durable and shock resistant cold-rolled carbon steel, enhanced with a protective corrosion resistant zinc plated coating, and paired with a red ergonomically designed anti-slip vinyl hand grip for optimal comfort and control.
  • DESIGN: Features an impressive holding clamping capacity of 375lbs with reliable latch and clamp action, plus a hold-down side mounting with U-shaped clamping profile.
  • SPECS: Clamp Base 1-1/2” x 1-7/8” | Mounting holes: 7/32” spaced 15/16” x 1-3/8” apart | 5/16” J Hook: 5-1/2” (length) with 5/16-18 thread.
  • Ideal for use on doors, machinery, automobiles, jig assemblies and other medium to heavy-duty job applications.
  • Cold-rolled carbon Steel with Zinc plated coating for corrosion resistance.
  • Features hook shaped clamp rod for clamping any custom latch point.
Check Stock

Hi-Lift Jack UTV-364 36' UTV Jack

  • The Hi-Lift Jack 36 inch UTV Jack is a crafted with the same high quality components as standard Hi-Lift jacks, sized and equipped for use with UTVs..
  • Unique gold zinc-coated winch/clamp/spreader attachment.
  • Black powder-coated jack and handle with gold zinc-coated hardware.
  • Two piece handle and socket is durable and reliable.
  • Safe use information stickers, including rated load details and operating instructions, affixed to handle.
Check Stock

Roadformer 3 Lap Joint Exhaust Band Clamp Preformed Aluminized Steel

  • Roadformer 3" exhaust clamp is to joint 3" OD pipe overlapping into 3" ID pipe. It is fast, easy and accurate installation, also minimize noise and....
  • This stepped exhaust band clamp is made in high quality standard and using 12.9 degree high-strength fasteners to provide truly sealing force.
  • Designed 360-degree full clamping area to create overall sealing without distorting exhaust pipe, exhaust muffler ends and exhaust tubing in exhaust....
  • Our Innovation reaction block technology offers great protection without exhaust ends be damaged when fastening. The band steel is tested over 100....
  • Roadformer is dedicated in providing real value to our customers and end users. We set industry quality standard.
Check Stock

Freedom Performance IN00082 Combat 2:1 Shorty Exhaust Systems - Black/Chrome

  • Fits 2015-2022 Indian Scout Bobber and Scout Sixty - The First & The Original - Equip your ride with a legit shorty motorcycle muffler that combines form and function. Founded in 2006, our brand is the pioneer in making slip-on motorcycle GP shorty exhausts..
  • A Sleek, Clean Look - Give your motorbike a striking appearance with this exhaust. It shows off a powder-coated black finish, which complements the color of your motorcycle's factory parts..
  • Fuss-Free Installation - Installing this motorcycle exhaust muffler won't take all day. Just remove your motorcycle's stock muffler, replace it with this exhaust, tighten the clamp, and you're all set!.
  • Heavy Duty Motorcycle Mods - You need a muffler that can keep up with you. This shorty GP exhaust is welded construction and designed to withstand the formation of rust or corrosion..
  • Great sound quality and the DB killer can be removed for sound adjustment. Optional baffle DB killer included to reduce exhaust noise, the motorcycle silencer insert is easy to install..
Check Stock