ReviewsZinc plated Anchor Kit

Vestil AS-344-4PK Concrete Anchor Four Bolt Kit, 3/4\ Diameter x 4-1/4\ Length

  • Anchor design makes installation quicker and easier.
  • Zinc plated steel provides a strong anchor point.
  • Anchor construction hold units in place in the most demanding environments.
Check Stock

CONFAST 3/4\ x 5-1/2\ Wedge Anchor Zinc Plated (Box of 20)

  • ZINC PLATED - Helps prevent rust in dry environments.
  • WIDE RANGE OF SIZES - Insures proper fastener for best results.
  • PACKAGED WITH NUTS AND WASHERS - Fast, quick, complete installation.
  • HOLE SIZE IS ANCHOR SIZE - Simplicity and ease of installation.
Check Stock

Drywall Self-Drilling Anchor with Screw Kit Anchor Screw Combination No Drill Or Hole in Wall for Hanging TV Shelf Strap Cabinet Decoration Fixing Curtain 50 Sets,0.47 x 1.18 Inch

  • Ample quantity: the package includes 50 pieces 0.47 x 1.18 inch/ 12 x 30 mm drywall self-drilling anchors with 50 pieces of screws kit, 100 pieces/ 50....
  • Pretty quality: the anchors and screws combination is derived from carbon steel and plated with yellow zinc for maximum durability, strong and....
  • Thoughtful design: the drywall self-drilling anchor will expand while tightening the screw in to increase its holding power.
  • No hole or drilling: when you use the wall anchor and screw kit, there are no hole or drilling required, ensuring that the screw and item are easily....
  • Broad usage: the anchors and screws combination is suitable for installing drywall in homes, offices or any other buildings.
Check Stock

Anrik 1\\/4 inch x 2-1\\/4 inch - 20 Pieces Wedge Anchor Zinc Plated Heavy Duty Fastener for Concrete

  • Wedge anchor diameter: 1/4" | Length: 2-1/4" | Qty: 20 pieces. Our wedge anchor is made from high quality carbon steel, and is zinc plated to prevent rust.
  • Drill bit diameter/Hole diameter is the same as anchor diameter. Use a 1/4" drill bit to drill a hole in the base material (Concrete only).
  • The wedge anchor is a torque-controlled, wedge expansion anchor. The required installation torque of the anchor is 4 ft/lbs..
  • The concrete anchor is for heavy duty fastening applications where high pull out values in concrete are needed. It is for concrete only, not for block or brick base material.
  • The wedge anchor is used in fastening sheet metal, steel and aluminum angles, or wood to concrete. The wedge anchor is ideal for structural anchorage, storage racking anchorage, machinery and hand rails installation.
Check Stock

uxcell® M6x45mm Zinc Plated Hammer Drive Anchor Expansion Bolt Fastener 8pcs

  • Total Length(Not Included Nail): 45mm/1.8".
Check Stock

FOREVTL Dry Wall Anchors and Screws Kit - 32pcs Drywall Anchors Heavy Duty Includes 8 Different Assorted Size Anchors and Screws and Installation Plier with Organizer Box

  • Perfect Solution for Hollow Walls: Hang things up easily on drywall and plasterboard with this hollow wall anchor kit..
  • Convenient & Comprehensive Package: This molly bolts setting tool includes everything you need, so you won't need to worry about buying extra screws or tools. It comes with a hollow wall anchor setting tool and 32 molly bolts in 8 different sizes, all packed in a double-sided box for easy storage and use..
  • Durable and Safe Setting Tool: The molly bolts setting tool is made of 2.5mm thickened reinforced carbon steel with heat treatment for corrosion resistance and deformation resistance. The ergonomic, non-slip grip shape of the tool also helps to prevent injuries while using it..
  • High-quality and Versatile Molly Bolts: These zinc plated carbon steel bolts are heavy-duty and can be used both indoors and outdoors. They offer a holding power of 40-65 pounds depending on size, ensuring that your items stay safely and securely in place..
  • Easy to Use and Remove: Drilling the hole, driving the anchor into the drywall, backing the screw out about 1/4", mount....
Check Stock

Hilitchi 160-Pieces Large/Small Zinc Plastic Self Drilling Drywall Hollow-Wall Anchor Assortment Kit

  • High-quality Zinc / Plastic Self-Drilling Anchor Kit, Constructed From Durable Plastic and Zinc for Maximum Durability, Can Be Easily Removed..
  • Applicable to 3/8", 1/2" or 5/8" Gypsum Wallboard, No Pre-Drilling Needed, Anchors can be Removed..
  • Starts Easier Than Other Drywall Anchors, Drills Directly Into Drywall Even If You Hit a Wood Stud..
  • Kit Includes 20pcs Large 20pcs Small Zinc / Plastic Anchors and 40pcs #81'' Screws, 40pcs #81-1 / 4'' Phillips Screws and a Plastic Case..
  • Package Quantity: 160pcs (80-Pairs), Material: Plastic, Zinc, Stainless Steel (Is not an ordinary iron screw)..
Check Stock

Monster FIX Best Quality Drywall Self-Drilling Anchors with Screws No Drill Or Holes in Wall Screws as a Gift Kit of 100 Pieces

  • ✔ STARTS EASIER THAN OTHER DRYWALL ANCHORS - drills directly into drywall even if you hit a wood stud..
  • ✔ HIGH QUALITY MATERIALS AND UNIQUE DESIGN - made of carbon steel and plated with yellow zinc for maximum durability. The split in the ribbed....
  • ✔ WON’T DESTROY THE WALL - no hole or drilling required. Can easily remove screw & item leaving anchor in wall for reuse and no hole left in the....
  • ✔ WIDE APPLICATION - deep thread design provides strong engagement in 1/4", 3/8", 1/2" or 5/8" gypsum wallboard, Hangs up to 66 lbs..
  • ✔ KIT INCLUDES - 50pcs 0.47x1.18 in (12x30 mm) Steel Anchors and 50pcs Zinc Screws.
Check Stock

AKKTOL Hollow Plaster Wall Drywall Anchor Setting Tool with 35 PCS Molly Bolts in 7 Sizes Heavy Duty Storage Box Included

  • Perfect Kit: Comes with a hollow wall anchor setting tool that perfectly works with M3/M4/M5/M6/M8 Molly Bolts and 35pcs molly bolts in 7 sizes: M4x32mm,M4x46mm, M4x60mm,M5x37mm,M5x52mm, M5x65mm,M6x52mm, intended for use on 0.12”-1.52" thin or hollow walls such as drywall, plasterboard, and other board materials. All are packed in a durable plastic box, convenient for your use and storage..
  • Easy to Use: With this tool, you just drill the hole, drive the anchor into the drywall, back the screw out about 1/4", mount the tool and squeeze. The tool ratchets and pulls the screw out, expanding the anchor perfectly..
  • Strong & Reliable Connection: Made of zinc-plated carbon steel, the largest of these sleeve-type dry wall anchors will safely hold items up to 50 pounds, the smallest anchors hold up to 18 pounds and the medium-size anchors hold up to 25 pounds. You’ll find these mollies suitable for hanging coat racks, mirrors, and other medium-weight items..
  • Durable Setting Tool: This hollow wall anchor setting tool is made of 2.5mm thickened REINFORCED CARBON STEEL with heat treatment which protects against corrosion and resists to deformation. With ergonomic type shape non-slip grips, protects you from getting hurt when using it..
Check Stock

Hilitchi 196-Pcs [11-Sizes] Heavy Duty Drywall Ribbed Anchors Assortment Kit Masonry with Self Tapping Stainless Steel and Galvanized Steel Screws Wall Anchor Set

  • ECO-FRIENDLY MATERIALThis kit contains plastic(nylon) anchors and galvanized (coated in zinc) and stainless steel self drilling screws. Stainless steel can be used in humid environment and could last for a a long time. Zinc alloy is of extreme hardness so it would not break easily. All are rustproof, anti-corrosion and quality materials. Whats more, plastic anchors can prevent the wall from damage. Money well spent for this kit !.
  • WHAT YOU WILL GETHigh Value Combo Pack, convenient to have the different sizes(11sizes anchors, each size with its matching self tapping screws all kept in one compartment). Also, it comes with one reusable storage plastic box with snap-tight lid for easy storage. Good variety many different wall anchors. Got a lot of small items to hang on the wall ? or wanna put large mirrors and pictures on the wall ? Order now for household spare tool. It suits all your basic anchoring needs..
  • INDISPENSABLE HELPERSend this kit to your children or your friends if they prepare to move out and start their independent life. We offer you a good start for an independent life. You must have faith in a new life you are heading towards and also have faith in our products. We believe that your money would be well spent :) if not, contact us anytime....
Check Stock

TOVOT 77PCS Wall Anchor Setting Tool Heavy Duty Hollow Wall Anchor Tool with 5 Sizes Molly Bolts Hollow Drive Wall Anchor Screw Kit (M4 M5 M6)

  • 【Practical Anchor Tool】: The setting tool with semi-automatic design can well finish the work of nailing bolts. The tool can be more comfortable with non-slip rubber material handle, and suitable for different types of bolts, heavy duty and reliable..
  • 【Widely Applications】: The setting tool set can be used as a fixed connection on hollow walls, plasterboard, and wood panels, suitable for mounting curtains, hanging pictures, and fixing shelves. The structure of the bolt is stable, heavy duty and not easy to break..
  • 【High-Quality】: The material of the wall anchor setting tool is  zinc plated carbon steel, which is water-resistant and highly hard, not easy to rust and deform by long term use..
  • 【Package Content】: The kit contains 1 metal hollow wall anchor tool, 76pcs, 5 seizes carbon steel molly bolts: 20pcs×M4×32mm, 20pcs×M4×38mm, 12pcs×M5×52mm, 12pcs×M6×52mm, 12pcs×M6×65mm..
  • 【Installation】: Equipped with anchors setting tool, easy to use and save time. Sufficient quantity and rich size for interior decoration use, plastic handheld work box, easy to car....
Check Stock