ReviewsZinc plated Split Washer

Prime-Line 9119507 Medium Split Lock Washers, Metric, M8, Zinc Plated Steel, (25-pack)

Round washer with a split and helical shape.
When fully fastened, the edges at the split bite into the nut and material surface.
Provides a spring tension force that adds additional friction.
Helps to prevent nuts from loosening in cases where it may be subject to vibration, in some applications a flat washer is used with the split lock washer.
Specification(s) Met: DIN 127 TYPE B, ISO 12683 TYPE 1.

Round washer with a split and helical shape.
When fully fastened, the edges at the split bite into the nut and material surface.
Provides a spring tension force that adds additional friction.
Helps to prevent nuts from loosening in cases where it may be subject to vibration, in some applications a flat washer is used with the split lock washer.

Round washer with a split and helical shape.
When fully fastened, the edges at the split bite into the nut and material surface.
Provides a spring tension force that adds additional friction.
Helps to prevent nuts from loosening in cases where it may be subject to vibration, in some applications a flat washer is used with the split lock washer.

Round washer with a split and helical shape.
When fully fastened, the edges at the split bite into the nut and material surface.
Provides a spring tension force that adds additional friction.
Helps to prevent nuts from loosening in cases where it may be subject to vibration, in some applications a flat washer is used with the split lock washer.

Round washer with a split and helical shape.
When fully fastened, the edges at the split bite into the nut and material surface.
Provides a spring tension force that adds additional friction.
Helps to prevent nuts from loosening in cases where it may be subject to vibration, in some applications a flat washer is used with the split lock washer.

Package Contents：5 sets, each include one hex bolt, hex nut, flat washer and lock washer.
Screw Length: 5" or 125mm (measured from under the head).
Made of 304 Stainless Steel (no coating outside) which is superior to regular steel and any zinc plated fasteners, provides good strength and corrosion resistance in bad environments.

(100pcs) M6 Curved Wavy Spring Washer with Shiny Yellow Zinc Plating.
High Quality Yellow Zinc Finish Over Steel.
Irregular shape acts like a spring, compressing when tightened and distributing the weight against the work.

Split Lock washers apply greater bolt tension per unit of applied torque as well as a hardened bearing surface adding to a more uniform torque control.These lock washers resist loosening caused by vibration and corrosion..
Package Content : 100x Split Lock Washer.

Phillips truss-head screws with self-guiding Pilot Point design..
High-grade carbon steel construction prevents stripping..
Corrosion and rust-resistant black zinc chromate plating..
Pre-installed nylon washers to avoid scratching equipment..
10-32 threaded, 3/4" long.DescriptionProduct Details The AC Infinity rack screw set is designed for installing various rack mount devices such as shelves, cable managers, network and AV equipment. The screws are constructed of high-grade strengthened carbon steel which prevents stripping. With a zinc chromate plating, they are more corrosion and rust resistant than black oxide coatings. Pre-installed nylon washers on each screw averts scratching equipment. Each set includes 50 pieces of 10-32 screws and washers.

...) 5/16-24 Nylon Insert Locking Nut, (1) Left Side Drawbar, (2) 3/8-24 Nylon Insert Locking Nut, (1) Right Side Drawbar, (2) 1/4-20 X 0.5 Hex Head Cap Screw, (1) Hardware Kit, containing: (1) 5/16-24 X 1.5 Full Thread, Hex Head Cap Screw, (2) Black Spacer .36, (2) Pin, 5/16 X 1.5, (2) Black Spacer .71, (2) 5/16 Lock Washer, (4) 5/16-18X1.75 Black Button Head Cap Screw, (6) 5/16 Flat Washer, (4) 5/16 Black Flat Washer, (2) 3/8 Split Lock Washer, (4) 5/16 Black Split Lock Washer, (2) 3/8 Flat Washer, (2) 5/16-24 X 1.5 Hex Head Cap Screw, (1) 1-7/8” Hitch Ball, (2) 3/8-24 x 2.75 Hex Head Cap Screw, (1) 3/4 Split Lock Washer, (1) 3/4-16 Hex Nut.
suggested tools for smooth installation: Combination Wrench Set, Torx Wrench Set, Hex Wrench Set, Torque wrench.
This Kuryakyn part is most compatible with Harley: '14-'19 Electra Glides, Road Glides (except '19 FLTRXSE), Road Kings & Street Glides (except '15-'19 FLHXSE).
Will not fit with accessory Saddlebag Guard Rails P/N 90200561.

This Washer Spring Removal Tool Fits for removing inner/outer door boot seal clamps on LG, Samsung and Kenmore Washing Machine. Replacement for 383EER4001A, 383EER4004A..
Washing Machine Spring Expansion Tool made of ddvanced carbon steel, zinc plated surface, with anti-slip rubber handle..
The built-in spring makes the tool more flexible, and you can repair the washing machine in a simple and quick way within 10 minutes, saving your working time..
If any issues from our Washer Spring Tool arise please don’t hesitate to contact us. We guarantee the quality of our tools and want to ensure you’re getting the best..