ReviewsZirconia Aluminum Oxide

3M (XL-WL) EXL Deburring Wheel, 14 in x 1 in x 8 in 8A MED [You are purchasing the Min order quantity which is 1 Wheels]

Freer cutting with higher metal removal rates than standard zirconia alumina blends.
Up to 5X the life of standard aluminum oxide products.
Highly effective on dirty, scale-covered castings.

Check Stock

3M Flap Disc 769F, T27, High Performance Abrasive, Ceramic Precision-Shaped Grain, 40+, 4 1/2 in x 7/8 in

LONG LASTING: Delivers long lasting high performance and value.
PRECISION-SHAPED GRAIN: The 3M Precision-Shaped Grain cuts faster and lasts longer than traditional abrasives.
OPTIMAL PERFORMANCE: Unique blend of ceramic Precision-Shaped Grain and aluminum oxide outperforms traditional alumina-zirconia flap discs.
CONSISTENT CUT RATE: Individual flaps break down to expose fresh minerals and deliver a consistent cut rate.
For industrial/occupational use only. Not for consumer sale or use..

Check Stock

Red Label Abrasives 2 X 42 Inch Knife Sharpening Sanding Belts - Premium Ceramic - Coarse Grits - 6 Pack Assortment

Kit includes 1 each: P36, P40, P60, P80, P100, and P120 grit premium ceramic sanding belts (6 total).
Industrial quality metalworking material designed specifically for knife making | Closed coat | Heavy duty y-weight polyester cloth backing.
Precision engineered bi-directional tape joint | Anti-clogging stearate to reduce heat and buildup | Resin over resin bonding for long belt life.
Wet or dry applications | Unique properties of ceramic grain deliver outlast other types (zirconia, silicon carbide, aluminum oxide, etc.) | Great for general metalworking as well.
Factory direct | Hand built in usa by Red Label Abrasives | Money back guarantee.

Check Stock

75Pcs 3 inch Quick Change Disc Set, Crossarctic Zirconia Roll Lock Sanding Disc with 1/4\ Holder for Die Grinder Surface Prep Strip Grind Polish Finish Burr Rust Paint Removal

✅Multiple Choices: 25 of each 36 Grit, 60 Grit and 80 Grit twist lock sanding discs. With 2 mandrel shafts, 1/4” drill or driver and die grinder do real well to do surface prep polishing grinding..
✅Completely Safe: Sanding disc 3 inch has non-woven, open web abrasive material which enables cool disc running and reduces the risk of heat induced warping and discoloration..
✅Save Time: The safe locking torque on the grinding disc is spirally connected to the shank holder, so this quick change locking device system reduces downtime..
✅Long Lasting: Zirconia Oxide is a tough abrasive, harder and more durable than Aluminum Oxide. The surface is attached with thermal and blocking resistant coating, which can improve the grinding efficiency and service life..
✅Widely Use: 3” sanding discs are excellent for using on surfaces of carbon steel, stainless steel, alloys, iron, wood, non-ferrous and used in shipbuilding, car building, aviation, machinery..

Check Stock

Benchmark Abrasives 2\ Ceramic Quick Change Sanding Discs with a Male R-Type Backing Pad 60 Grit - 25 Pack

QUANTITY: This is a packge of 25 Ceramic Quick Change Discs..
DIMENSIONS: 2" Diameter with a Male R-Type backing pad..
APPLICATIONS: Ceramic Quick Change Discs prodive the best cut rate to cost ratio. They are well-suited for grinding, deburring and finishing..
USE: Our quick lock discs are made for use on a die grinder and should only be used with the proper size mandrel. 2" discs should be used with a 2 inch mandrel..
INFO: Ceramic grains run cooler than aluminum oxide and zirconia grains. Ceramics are the number one choice for work on heat sensitive alloys such as stainless steel, nickel alloys and titanium..

Check Stock

Walter Surface Technologies 15D044 Backing Pad Assembly - 4 ½ in. Sanding Disc Pad. Abrasive Wheel Pads

Components: the set includes a plastic back pad and a 5/8 in.-11 clamping nut. The nut ensures secure mounting of the pad on sanding disc for uninterrupted sanding operations.
Sander Backer Pad: the disc pad is specially manufactured for dissipating heat, maximizing the durability of resin fiber sanding discs.
Efficiency: back pad works suitably well with 4 ½ in. Coolcut (aluminum oxide) and Topcut (zirconia alumnia) sanding discs from Walter Surface Technologies. This pad is rated for maximum rotational speed of 13300 RPM.
Multipurpose: being flexible, the pad can be employed during blending or removal of welds and finishing of erratic or curved surfaces. The backing pad is made from industrial-grade plastic with impact resistance.
Specifications: this orange-colored pad measures 4 ½ in. in diameter and weighs 2.82 oz..

Check Stock

Norton Blue Fire Right Cut Right Angle Grinder Reinforced Depressed Center Abrasive Cut-off Wheel Type 27 Zirconia Alumina 5/8 -11 Hub 4-1/2 Diameter x 0.045 Thickness Pack of 10

Zirconia alumina is self-sharpening and durable, allowing for a faster cut rate than aluminum oxide.
Type 27 depressed center wheels are used for cutting off and portable grinding.
Reinforced design helps provide safety, strength, and straight cuts.
Resin bonds soften under the heat of grinding, releasing dulled abrasive grains.
Depressed center wheels for use on right angle grinders, also called angle grinders, without gouging the workpiece.

Check Stock

Tshya 270Pack 2inch Sanding Discs Pad Variety Kit for Drill Grinder Rotary Tools Die Grinder Accessories with 1/8'&1/4' Shank Backer Plate, Sanding Pads Includes 36-3000 Grit

✔ FIRST CHOICE - Premium 2" Variety Zirconia-Nylon Nonwoven-Strip-Wool die grinder sangding Discs(26Pcs) and Aluminum oxide hook loop discs (240Pcs),sanding with common grits (P36-3000) to meet your various polishing requirements..
✔ TWO TYPES SHANKS - We have found all the connection methods for your project as far as possible. Roll Lock 1/4 inch(6.35mm) Round shank works better with pneumatic tools.
1/4 inch Hex shank more suitable for electric tools..
✔ THREE WAYS CONNECT - The Air-Tool Backer Plate with 1/8"&1/4" Shank can work with any air or electric drill, die grinder, and other rotary tools for the utmost sanding control. You can even put the pad directly on a pneumatic tool without shank..
✔ PERFECT FOR DIE GRINDER - A special soft PU Foam adapter Pad has been developed for this Kit, you can easily install the Hook Loop sandpaper on the Black Disc Pad Holder, so that your can do more with die grinder,Time is Money！.
✔ 270 PACK – 240Pcs 2 inch H&L Sanding Discs (P80/120/180/240/320/400/600/800/1000/1500/2000/3000 each 20Pcs), 15 Pcs Zirconia roll lock discs (P36/60/80 each 5Pcs), 9 Pcs Non-woven discs, 1Pcs Strip disc, 1Pcs Wool disc, 1Pcs Air-Tool Backer Plate with 1/8"&1/4" Shank, 1Pcs Disc Pad with 1/4"Round/Hex Shanks, 1Pcs Soft....

Check Stock

#80 Grit Aluminum Oxide Blast Media (8 LBS/3.6kg) - Premium Long-Lasting Sand Blasting Media, High Abrasive Force Sand Blaster Sand for Metal, Sandblasters, Blasting Cabinet, Blasting Guns - by TITGGI

【HIGH HARDNESS】Brown fused aluminum oxide is a mineral with a hardness of 9 on the Mohs scale (just below diamond), our aluminum oxide blast media will clean & etch on all types of surfaces including glass, granite, marble, ceramic and steel for fast, effective rust removal..
【LONG-LASTING】Aluminum oxide blast media won't break down as fast as glass blasting media and has a longer cycle life than most blast media. Lasts 10 times longer than silica and save your money..
【ECO-FRIENDLY】We provide you sand blasting media with strict quality standards, no free silica, 100% recycled of the sand blaster sand for metal, can be used wet or dry..
【PERFECT PACKAGING】We use a high quality white bucket for 8 LBS aluminum oxide blast media, you can easily carry and use it, without worry about damaged and leaked like carton..
【100% SATISFACTION GUARANTEE】If you are not satisfied with our aluminum oxide blast media, we will provide you a full refund or free replacement!.

Check Stock

100pc 1/8\ Shank Rotary Tool Accessory Set for Dremel (Sanding | Polishing | ...

Universal fit for all rotary type tools including Dremel | 1/8th Shank.
Sanding Band, Rubber Mandrel for Sanding Band, Fiber Glass Cutoff Wheel, Abrasive Wheel,.
15pc Soft Wool, 9pc Pink Aluminum Oxide, 9pc Green Aluminum Oxide, Polishing Woolen Wheel.
30pc Soft Wool, 10pc Hard Wool, Silicon Cutoff Wheel, Aluminum Oxide Cutoff Wheel,.
Stainless Steel Brush, Mounted Abrasive Point, Diamond Burs, HSS Burs/ Drills, HSS Burs/ Drills.

Check Stock

Dura-Gold - Premium - Variety Pack 40,60,80,120,220,320,400,600,800,1000 - 3 Gold Hook & Loop Sanding Discs for DA Sanders - Box of 50 Sandpaper Finishing Discs for Automotive and Woodworking

Variety Pack Box of 50 Dura-Gold Premium 3" Sanding Discs with a Hook & Loop Backing plus a 3" Drill Backing Plate with Soft Interface Pad. Pack....
Superior quality sanding discs made with super coated aluminum oxide corundum that's fused with zirconia alumina. It delivers a fast, exceptionally....
This variety packs a range of extra-fine to extra coarse sandpaper discs, making them ideal for sanding on all types of surfaces. Use them for fine to....
Our sandpaper discs are suitable for use in auto body and paint shops, woodworking wood furniture making, metalworking metal sanding, crafting,....
Dura-Gold offers a complete vast product line of professional, high-quality sandpaper types that provide exceptional sanding performance, so you can....

Check Stock