ReviewsZwave Thermostat Battery

Aeotec Range Extender 7, Zwave Extender and Repeater (One Pack)

  • WIRELESS ZWAVE REPEATER- Amplifies and repeats weak signals boosting the range and reliability of weak Z-Wave / Z-wave Plus devices. 250% further wireless range.
  • 50% FASTER Z-WAVE COMMUNICATION- Built upon Aeotecs unique Gen7 hardware and firmware stack, stable performance, achieving seamless automation.
  • SECURITY 2 SYSTEM COMPATIBLE- This particularly means it can amplify and repeat signals from security focussed devices, including door locks and smoke sensors.
  • SMARTSTART QR CODE- Simplest possible device installation. Compatible with Zwave hub including Control4, Fibaro, SmartThings, Vera and more..
  • Easy as plug and play. Start your smart home here. Z-Wave Plus certified. Certification number: ZC12-19080007.
Check Stock

MPF Products 380mAh TL284443 Battery Replacement Compatible with Nest Learning Thermostat (2nd Generation)

  • Replacement for the Following Battery Model/Part Numbers: TL284443..
  • Intended for/Compatible with the Following Thermostat Models: Nest Learning Thermostat (2nd Generation). Please Note: In most cases, the Nest thermostat can get enough power from the systems heating and cooling wires to charge its internal battery. But in a small number of situations you may need to first charge the unit via USB after initial battery installation or connect a common or C wire to deliver enough consistent power to your thermostat and keep the unit charged..
  • 3.7V 380mAh 1.41Wh Lithium-Polymer Rechargeable Battery Pack. Includes Free Installation Tool..
Check Stock

J.LUMI YCA2002 Microwave Ceiling Motion Sensor, 5.8 GHz Microwave Motion Detector Light Switch 1200W, Ceiling Mount Motion Detector, 32-ft Range, White (85-265V AC)

  • 360 DEGREE DETECTION. Ideal for ceiling height of 8 feet to 13 feet (Designed specifically for Home and Office use).
  • ADJUSTABLE SENSITIVITY with LED status indication. Craft your own smart home with different levels of detecting sensitivity..
  • ZWAVE Plus Technology. Real-time battery power level monitoring, Anti-tamper alarm, Low consumption..
  • COMPATIBLE with the following certified Z-Wave Hubs: FIBARO, VERA, HOMESEER..
  • EASY SETUP. Takes only moments to install and easily pair up with Z-wave gateway. The wireless device is powered by 2 replaceable AA batteries, estimated battery life: 2 years..
Check Stock

AduroSmart ERIA Smart Home Hub / Gateway, Compatible with ZigBee Lighting/Sensors/Plugs/Thermostats/Locks, Works with ERIA APP/Alexa/Google Assistant/Apple Shortcuts/IFTTT

  • ...k your colors, change the brightness, store and play your favorite lighting scenes, set timers, and control your lighting through the ERIA App or through your Voice with Amazon Alexa or Google Assistant. Compatible with ERIA, Hue, Sylvania, Cree, Tradfri, GE and Sengled ZigBee smart bulbs. (Note. Does Not work with Zwave devices!). (see a detailed compatibility list on our website)..
  • Add ZigBee wireless smart sensors: Monitor your home while you are at home and away and be alerted and receive notifications on your smart phone when there is a situation that requires your attention. Compatible with ERIA, Centralite, Iris, Sylvania, Sengled & SmartThings ZigBee sensors. (Note! Does Not work with Zwave devices!). (Find a detailed Compatibility list on our website)..
  • Add ZigBee wireless smart plugs to control your appliances through the ERIA App or through your Voice with Amazon Alexa or Google Assistant or Set timers or create automations to automate your switching. Compatible with ERIA, Centralite, GE, IKEA, Iris, Leviton, Sylvania, Sengled, SmartThings ZigBee smart plugs..
  • Add a ZigBee wireless Smart lock to open, manage and monitor access to your Smart lock remotely through the ERIA app or through your Voice with Amazon Alexa or Google Assistant Compatib....
Check Stock

Aeotec Z-Stick Gen5 Z-Wave Hub Z-Wave Plus USB to Create Gateway (Ordinary White)

  • Works with Windows / Mac / Linux / Raspberry Pi 4 (2020 upgrade) to create a zwave hub for control of Z-Wave plus and Zwave devices, Tiny but powerful.
  • 1.1 x 0.4 x 3.5 inches in size and capable of controlling up to 232 different Z-Wave devices. package: 1x Z-Stick Gen5, 1x Manual, the others are not included.
  • Can be used to upgrade the firmware of compatible Z-Wave Plus devices that can accept OTA / wirelss firmware upgrades.
  • Compatible with Z-Wave enabled, home automation software including Home Assistant, Home Seer, Indigo 7, OpenHab, and OpenHab2. No software included.
  • Z-Wave Plus certified. Certification number: ZC10-15060006.
Check Stock

Arlo - Wireless Home Security Camera System with Motion Detection | Night vision, Indoor/Outdoor, HD Video, Wall Mount | Cloud Storage Included | 4 camera kit (VMS3430)

  • The Arlo Ultra SmartHub securely connects Arlo, Arlo Pro, Arlo Pro 2 & Arlo Ultra wire-free cameras.
  • Connects to the Internet via your home router, while providing long-range connectivity and the best battery life for your cameras.
  • Features include WiFi (2.4GHz), ZWave, Zigbee, and ArloRF ready, local backup, Smart Siren and expanded coverage through additional base stations.
Check Stock

24V Transformer for Thermostats, 16.5ft Long C Wire Adapter for Nest, Honeywell, Ecobee Thermostats

  • Upgraded 24V Thermostat Transformer - With the upgraded system, the new adapter is more stable and without noise during use. Continuously transfer 110/120v to 24volt Make your thermostat works more stable and safe..
  • Low Battery Issue is Solved - The adapter is a quick and convenient way to charge your smart thermostat continuously. Now get rid of all battery issues and with no more interrupt or any safety concerns..
  • Wide Compatibility - This plug in adapter is compatible with Honeywell, Nest, Ecobee, Emerson, Ecobee4 Smart WiFi thermostat, etc. .
  • Certificated Safe to Use - Made of high quality fireproof material and pure copper plugs. A waterproofed 16.4ft cable is long enough for you to put the thermostat any where higher or lower on your wall..
  • 2 Yrs Warranty - The adapter comes with 10 clips for easy install. 2 Yrs quality warranty. Feel free to contact us if you have any questions..
Check Stock

Aeotec Z-Stick 7 Plus, Zwave Plus USB to Create Z-Wave hub, Gateway Controller with 700 Series ZWave, SmartStart and S2, Works with Raspberry Pi 4, Compatible with Home Assistant

  • Works with Raspberry Pi, Windows, Mac, Linux to create a zwave hub for control of Z-Wave and Z-Wave Plus devices..
  • German engineered to use Aeotec exclusive Gen7 and 700 series technologies. Offers ZWave SmartStart and S2 security..
  • Faster, further. Z-Stick 7 wirelessly transmits up to 250% further in open-place space and with 18% faster CPU.
  • Compatible with Z-Wave enabled, home automation software including Home Assistant and Indigo 7. No software included..
Check Stock

Honeywell Lynx Touch L5210 Home Automation/Security Alarm Kit with WiFi and Zwave Module

  • Kit Includes LYNX Touch 5210 Control Panel with Transformer and Battery Backup (3) 5815 Slim Door/Window Transmitters, (1) 5834-4 Four-button Wireless Keyfob & (1) 5800PIR-RES Wireless Motion Detector.
  • Integrated Z-Wave Support via L5100-ZWAVE Z-Wave Control Module (Included) for up to three thermostats (HVAC system or battery powered) with 1°F and 0.5°C set points Four door locks - Jammed locks reported to Honeywell Total Connect Remote Services 40 devices (lights, switches and lamp modules) 20 scenes 20 rules (event-based actions) 20 schedules (time-based actions) Sunrise/sunset lighting control Randomized lighting control.
  • Wi-Fi via L5100-WIFI Wi-Fi IP Communication Module (Included) for L5210 IEEE 802.11 B/G/N radio Supports alarm reporting Supports two-way voice LYNX Connect app supports up to four mobile iOS and Android devices. Internet Central Station Communication with L5100-WIFI or ILP5 Module.
  • Control Panel Dimensions (approx) 6.1" H x 8.5" W x 1.71" D (15.5cm H x 21.6cm W x 4.4cm D).
  • **PAID MONTHLY SERVICE REQUIRED FOR HONEYWELL'S TOTAL CONNECT REMOTE SERVICES**.
Check Stock

Arlo Pro SmartHub - Arlo Certified Accessory - Connects Arlo Cameras to the Internet, Works with Arlo Ultra, Ultra 2, Pro 3, Pro 4, Pro 3 Floodlight, Essential & Video Doorbell Cameras - VMB4540

  • The Arlo Ultra SmartHub securely connects Arlo, Arlo Pro, Arlo Pro 2 & Arlo Ultra wire-free cameras.
  • Connects to the Internet via your home router, while providing long-range connectivity and the best battery life for your cameras.
  • Features include WiFi (2.4GHz), ZWave, Zigbee, and ArloRF ready, local backup, Smart Siren and expanded coverage through additional base stations.
Check Stock

24 Volt Transformer, 500mA Power 500cm Cable C Wire Adapter for All Version Ring Doorbell, Competible with Nest Hello Skybell Ecobee Sensi Smart and Honeywell Thermostat (24V)

  • ♥【UNIVERSAL DESIGN】- The power adapter compatible with the Ring Video Doorbell, Ring Video Doorbell 2 and Ring Video Doorbell Pro. It also fit most of Thermostat, such as Nest Hello Skybell Ecobee Sensi Smart and Honeywell Thermostat, You can now let your video doorbell or thermostat operate continuously without the need to remove it to change its battery, with no uninterrupted operation and viewing influence..
  • ♥【POWER SPECIFICATION】- Plugs into your standard 110v/120v outlet and converts to 24 volt/500mA AC, Powers your popular smart thermostats (Nest, Ecobee, Honeywell, Emerson Sensi, Hive, etc.) and doorbells (Ring, Nest Hello, Skybell, August) that require 24 volt power for operation..
  • ♥【EASY TO INSTALL】- 16.4FT cable Don't need a resistor. Assemble along the wall from your outlet to your doorbell or thermostat without the existing doorbell or wiring. Easy installation and can be set up in minutes..
  • ♥【SAFE & NO MORE HASSLE】- Our battery backup has gotten the UL certificate. Never charge your battery again, A quick fix to the problem of "Low batter" you can charge it directly (plug adapter into outlet and power up). that means you don't need to remove your honeywell thermostat in order to charge up the battery. With an AC outp....
Check Stock