Reviewsboring Bar Industrial Tool

OSCARBIDE 1/2 x 7 Indexable Boring Bar with 10 Pieces Carbide Insert CCMT09T304 CCMT32.5 Right-Hand Sclcr Boring Bar

Sclcr Boring Bar 1/2" Shank Diameter,Overall Length 7”.
Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient,good wear resistance.
Used for Turning internal hole,reaming,copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
CCMT09t304(CCMT32.5) Carbide Inserts 80 degree,negative 5 degree end & side cutting angle.
Packing:1 pc 1/2'' x 7'' RH SCLCR Indexable Boring Bar with 10pcs carbide inserts CCMT09T304(CCMT32.5).

Check Stock

AXA #4 QUICK CHANGE HEAVY DUTY BORING BAR CNC TOOL POST HOLDER 250-104

For use with AXA tool post 250-100 or 250-111. up to 12" swing..
Equipped with a split bushing to accommodate a boring bar of smaller diameter. Holds 5/8" tool with bushing, 3/4" diameter without bushing.

Check Stock

ASZLBYM 2PCS 5/8\ MGIVR2016-2 MGIVL2016-2 Lathe Boring Bar Grooving Cut-Off Tool Holder with 2PCS MGMN200-G NC3020 Insert

Sclcr Boring Bar 5/8" Shank Diameter, Overall Length 8”.
Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
CCMT09t304(CCMT32.5) Carbide Inserts 80 degree，negative 5 degree end & side cutting angle.
Packing:1 pc 5/8'' x 8'' RH SCLCR Indexable Boring Bar with 10pcs carbide inserts CCMT09T304(CCMT32.5).

Check Stock

iCarbide 3/4 Shank Indexable Boring Bar 6pcs Set with 6pcs Carbide Inserts

Sclcr Boring Bar 1-1/2" Shank Diameter, Overall Length 14”.
Insert Material: made of solid carbide with Multilayer coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
OSCARBIDE boring bars Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
CCMT120408( CCMT432) Carbide Inserts 80 degree，negative 5 degree end & side cutting angle.
For semi-finishing and finishing operations.

Check Stock

OSCARBIDE 3/4 Shank 8 Pieces/Set Indexable Boring Bars,90 Degree Round Shank Boring Bars with Indexable Carbide Inserts 4 Pieces TCMT21.51 & 4 Pieces TCMT221

OSCARBIDE Boring Bar Set ,Bar holders are made of high quality steel with coated, inserts with Tin-coated are made of carbide,for moistureproof, rust-proof,for long time use.
Round shanks allow the operator to set positve or negative rake,chip breaker eliminates long stringer chips.
Carbide Inserts can be indexed, when it is dull use another sided,It is not necessary to remove tool from chuck or tool post.
Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
Replacement insert for this kit ,please search the Asin of item: B07Q2HNGVF & B07R6M1F3H.

Check Stock

Original Speculaas - Hellema Dutch Spiced Cookies Bubble Wrapped and Boxed with Ribbon - 14.1 Oz

...,and they're potentially useful for different parts of different guns. for reaching into tiny space areas (gas blocks,bolt carriers etc) to easily remove any caked on carbon without scratching metal,pry loose tight fitting parts or grip shell case in chamber,more you can imagine..
【100 Pcs Cotton Swabs】Lint Free Industrial-grade Low-lint cotton Doesn't leave lint behind.6 inch Long enough to clean pistol bore and magazine well.Tips hold up well when cleaners are used Allow perfect placement of oils..
【100 Pcs Bamboo Handle Cotton Swabs】Lint Free Industrial-grade Low-lint cotton Doesn't leave lint behind.6 inch Long enough to clean pistol bore and magazine well.Tips hold up well when cleaners are used Allow perfect placement of oils..

Check Stock

Saker Multi-function Foldable Level, 28-Inch Multi-Angle Measurement Woodworking Tools,Precise Leveling In Any Position,Save Your Precious Time

...,and they're potentially useful for different parts of different guns. for reaching into tiny space areas (gas blocks,bolt carriers etc) to easily remove any caked on carbon without scratching metal,pry loose tight fitting parts or grip shell case in chamber,more you can imagine..
【100 Pcs Cotton Swabs】Lint Free Industrial-grade Low-lint cotton Doesn't leave lint behind.6 inch Long enough to clean pistol bore and magazine well.Tips hold up well when cleaners are used Allow perfect placement of oils..
【100 Pcs Bamboo Handle Cotton Swabs】Lint Free Industrial-grade Low-lint cotton Doesn't leave lint behind.6 inch Long enough to clean pistol bore and magazine well.Tips hold up well when cleaners are used Allow perfect placement of oils..

Check Stock

OXA #4 Quick Change Heavy Duty Boring Bar Tool Post Holder OXA 250-004

For use with OXA tool post 250-000. 6-8" swing.
Holds 3/8" with bushing (1/2" diameter without bushing).
Equipped with a split bushing to accommodate a boring bar of smaller diameter.

Check Stock

DASBET 16PCS Blind Inner Bearing Puller Hole Remover Extractor Set Slide Hammer Tool Kit

【Applicable】This inner bearing puller set is designed for loosening and pulling tight bearings and bushings, and fit for all vehicles 8-53MM bore bearing..
【Instructions to operate】: How to use? Firstly insert the correct collet in the bore of the bearing and turn the nut to expand the collet till it is secure within the bearing.
Attach the small slide hammer and yank the weight towards the handle to give an extra snap of weight.
Repeat action until the bearing or bushing has been removed.
U-shaped bearing seal puller can be used by threading the bushing puller onto the collet and tightening the nut to slowly pull the bearing out of place..
【Usage】This slide bearing removal tool is designed to quickly finish the job without damaging the removed parts or the tool. This small bearing puller tool is ideal for professionals and do-it-yourselfers..
【Sturdy Construction】: Constructed of a strong, durable carbon steel, the bearing extractor tool is sure to pull even the toughest wheel bearing and bushings from tight positions. This blind bearing puller set has a long steel rod and a T-bar handle. The flared ends of the shop hammer weight provides a sturdy grip. The forged hardened steel and rust-proof finish help to increase pulling strength an....

Check Stock

Romanideal Practical Entry Level Gun Cleaning Kit Includes Gun Cleaning Brush Gun Cleaning Picks Gun Cleaning Patches 6 Inch Cotton Swabs 10ML Oiler and Gun Cleaning Cloths.

...,and they're potentially useful for different parts of different guns. for reaching into tiny space areas (gas blocks,bolt carriers etc) to easily remove any caked on carbon without scratching metal,pry loose tight fitting parts or grip shell case in chamber,more you can imagine..
【100 Pcs Cotton Swabs】Lint Free Industrial-grade Low-lint cotton Doesn't leave lint behind.6 inch Long enough to clean pistol bore and magazine well.Tips hold up well when cleaners are used Allow perfect placement of oils..
【100 Pcs Bamboo Handle Cotton Swabs】Lint Free Industrial-grade Low-lint cotton Doesn't leave lint behind.6 inch Long enough to clean pistol bore and magazine well.Tips hold up well when cleaners are used Allow perfect placement of oils..

Check Stock

Blush Confetti Cute Cocktail Shaker with Lid and Built-in Strainer, Fun Bar Tool and Accessory, BPA-Free, Gold

THROW YOURSELF A PARTY - Tired of the usual boring, plain-old bar tools and bar accessories? Liven up your kitchen and bar cart with a cocktail shaker that puts the rest to shame. Show off your personality whether you’re mixing drinks like a pro bartender, or just showing it off on your home bar cart or liquor cabinet..
SHAKE OFF THE WORKDAY AND MIX UP SOME FUN - Perfect for work happy hours or enjoying a cocktail by the pool, this confetti cocktail shaker will make every cocktail feel like a celebration. Mix up colorful drinks like the iconic cosmopolitan or other fun cocktail recipes and show off the ingredients through the sides of the shaker..
CAP AND BUILT IN-STRAINER MAKE BARTENDING A BREEZE - All you need is your cocktail ingredients and glassware. This bar accessory handles all of the shaking and straining, ensuring perfectly chilled cocktails and shots, without any extra ice or lingering ingredients. Make all of your favorite shaken cocktail recipes in this fun bar tool!.
BPA-FREE DOUBLE-WALLED PLASTIC FILLED WITH CONFETTI - Every shake creates a flurry of confetti. When you mix up drinks, it looks like there’s a party going on right in the shaker! And you’ll be getting the party started when you show off this cute bar accessory to friend....

Check Stock