Reviewsboring Bar Power Tool

OSCARBIDE 3/4 Shank 8 Pieces/Set Indexable Boring Bars,90 Degree Round Shank Boring Bars with Indexable Carbide Inserts 4 Pieces TCMT21.51 & 4 Pieces TCMT221

OSCARBIDE Boring Bar Set ,Bar holders are made of high quality steel with coated, inserts with Tin-coated are made of carbide,for moistureproof, rust-proof,for long time use.
Round shanks allow the operator to set positve or negative rake,chip breaker eliminates long stringer chips.
Carbide Inserts can be indexed, when it is dull use another sided,It is not necessary to remove tool from chuck or tool post.
Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
Replacement insert for this kit ,please search the Asin of item: B07Q2HNGVF & B07R6M1F3H.

Check Stock

RIKON Power Tools 70-105 10\ x 18\ 1/2 hp Mini Lathe

Rikon mini lathe: This Rikon mini lathe features a ½ motor that provides ample power for all turning needs. With a 10” swing and 18” between centers, this mini lathe also has a self ejecting tail stock and has easy access to speed change..
Sturdy and Dedicated: Designed specifically at the request of pen turners who wanted a sturdy, dedicated machine for their craft. This scaled-down, basic mini lathe is made from cast iron, so vibration is not a factor, unlike other lathes made of aluminum..
5 speed ranger: This mini lathe has a 5 speed range that covers the bases for boring barrel holes, roughing out pen billets, turning to shape and finishing..
Includes: This lathe includes a live center, tool rest, knock-out bar, and wrenches..

Check Stock

OXA #4 Quick Change Heavy Duty Boring Bar Tool Post Holder OXA 250-004

For use with OXA tool post 250-000. 6-8" swing.
Holds 3/8" with bushing (1/2" diameter without bushing).
Equipped with a split bushing to accommodate a boring bar of smaller diameter.

Check Stock

DASBET 16PCS Blind Inner Bearing Puller Hole Remover Extractor Set Slide Hammer Tool Kit

【Applicable】This inner bearing puller set is designed for loosening and pulling tight bearings and bushings, and fit for all vehicles 8-53MM bore bearing..
【Instructions to operate】: How to use? Firstly insert the correct collet in the bore of the bearing and turn the nut to expand the collet till it is secure within the bearing.
Attach the small slide hammer and yank the weight towards the handle to give an extra snap of weight.
Repeat action until the bearing or bushing has been removed.
U-shaped bearing seal puller can be used by threading the bushing puller onto the collet and tightening the nut to slowly pull the bearing out of place..
【Usage】This slide bearing removal tool is designed to quickly finish the job without damaging the removed parts or the tool. This small bearing puller tool is ideal for professionals and do-it-yourselfers..
【Sturdy Construction】: Constructed of a strong, durable carbon steel, the bearing extractor tool is sure to pull even the toughest wheel bearing and bushings from tight positions. This blind bearing puller set has a long steel rod and a T-bar handle. The flared ends of the shop hammer weight provides a sturdy grip. The forged hardened steel and rust-proof finish help to increase pulling strength an....

Check Stock

Grizzly Industrial G0842-14" x 37" Wood Lathe with Copy Attachment

Rikon mini lathe: This Rikon mini lathe features a ½ motor that provides ample power for all turning needs. With a 10” swing and 18” between centers, this mini lathe also has a self ejecting tail stock and has easy access to speed change..
Sturdy and Dedicated: Designed specifically at the request of pen turners who wanted a sturdy, dedicated machine for their craft. This scaled-down, basic mini lathe is made from cast iron, so vibration is not a factor, unlike other lathes made of aluminum..
5 speed ranger: This mini lathe has a 5 speed range that covers the bases for boring barrel holes, roughing out pen billets, turning to shape and finishing..
Includes: This lathe includes a live center, tool rest, knock-out bar, and wrenches..

Check Stock

Blush Confetti Cute Cocktail Shaker with Lid and Built-in Strainer, Fun Bar Tool and Accessory, BPA-Free, Gold

THROW YOURSELF A PARTY - Tired of the usual boring, plain-old bar tools and bar accessories? Liven up your kitchen and bar cart with a cocktail shaker that puts the rest to shame. Show off your personality whether you’re mixing drinks like a pro bartender, or just showing it off on your home bar cart or liquor cabinet..
SHAKE OFF THE WORKDAY AND MIX UP SOME FUN - Perfect for work happy hours or enjoying a cocktail by the pool, this confetti cocktail shaker will make every cocktail feel like a celebration. Mix up colorful drinks like the iconic cosmopolitan or other fun cocktail recipes and show off the ingredients through the sides of the shaker..
CAP AND BUILT IN-STRAINER MAKE BARTENDING A BREEZE - All you need is your cocktail ingredients and glassware. This bar accessory handles all of the shaking and straining, ensuring perfectly chilled cocktails and shots, without any extra ice or lingering ingredients. Make all of your favorite shaken cocktail recipes in this fun bar tool!.
BPA-FREE DOUBLE-WALLED PLASTIC FILLED WITH CONFETTI - Every shake creates a flurry of confetti. When you mix up drinks, it looks like there’s a party going on right in the shaker! And you’ll be getting the party started when you show off this cute bar accessory to friend....

Check Stock

NEW 9 pcs 1/2

9 Piece boring bar set features C-6 carbide for use in harder materials but also works great in aluminum and other soft metals All shanks are held to 0.0000-0.0005" from the nominal diameter and made of special heat treated alloy steel. Shank Diameter- 1/2".
Contains: (3) pcs. 5/16" minimum bore (1 ea. 3/4" bore depth x 2-1/4" overall, 1 ea. 1-1/8" x 2-5/8", & 1 ea. 1-1/2" x 3").
Contains: (3) pcs. 7/16" minimum bore (1 ea. 1-1/8" bore depth x 2-5/8" overall, 1 ea. 1-11/16" x 3-3/16", & 1 ea. 2-1/4" x 3-3/4"), (3) pcs. 9/16" minimum bore (1 ea. 1-1/2" bore depth x 3" overall, 1 ea. 2-1/4" x 3-3/4", & 1 ea. 3" x 4-1/2").

Check Stock

EWK 2\ to 7\ 3 Stones Engine Cylinder Hone Tool Adjustable Cylinder Deglazer Piston Honer 220 Grit

... walls to produce an oil holding cross hatch pattern and provide an adequate seal..
【 Smooth Surface Deglazing 】Fits 2” to 7 (50.8mm to 177.8mm) diameter brake caliper bores, engine cylinders of automotive, motorcycle and industrial equipment. The 3 pieces adjustable 3” stones are perfect to work with 1/4” power drill for effectively creating friction on cylinder bore..
【 Highly Flexible 】 Adjustable tension screw, controls the spring pressure of stones against cylinder bore to meet different piston diameters. The self-aligning and flexible shaft ensures a smooth movement to get you a nice even hatch pattern bore..
【 Durable & Long Lasting & Replaceable 】 Made of premium steel, maximize the cylinder honing tool with extra strength and durability. The 220 grit stones are replaceable and will worn out gradually depends on how often you use it..
【 EWK Assurance】Excellent WorKing experience guaranteed! EWK provides you premium quality tools and the best service with 12 months warranty. If there is any problem or concern with our products, please contact us for assistance..

Check Stock

7PCS Carbide Turning Inserts Lathe Threading Tool Set, 12mm Mini Indexable Shank Lathe Drill Bar Turning Tool with Carbide Inserts for Finishing Operations

High-Quality Materials: Made of durable high-quality alloy steel materials with hardened and sharp carbide blades for effective processing..
Durability and Sharpness: Tungsten carbide blades are tinned to provide long life and sharpness, and have a higher temperature than ordinary steel tools. The turning tool holder is made of high-quality steel and plated with nickel, which has durability, moisture resistance, rust resistance and corrosion resistance..
Excellent Cutting Performance: Each tool holder has a cemented carbide insert with a positive cutting angle and a built-in chip breaker, which is very suitable for general cutting operations..
Usage Scenarios: It is used for turning inner holes, reaming, boring, etc. Used for semi-finishing machining on the basis of existing holes on boring machines or lathes..
Product Packaging: Including Shank Lathe Drill Bar Turning Tool model S12M-SCLCR06 / SER1212H16 / SCL1212H06 / MGEHR1212-2 / SNR0012M11 / SDNCN1212H07 / SDJCR1212H07.

Check Stock

MT2 Boring Shank, Mt2-1-1/2-18- (m10) Manganese Steel Boring Bar CNC Lathe Tool Inch Boring Head Shank Connecting Rod

HIGH-QUALITY MATERIALS: The boring bar is made of high-quality manganese steel to improve durability and service life..
SCOPE OF APPLICATION: Boring bar for CNC lathes with 1/2 "boring head. It can be used for boring, round, end face, step hole, inner hole end face, cutting inner hole and annular groove on the outer circle, etc..
ACCURATE THREAD: The thread of the boring bar is accurate and can be tightly connected with the boring head..
EXQUISITE WORKMANSHIP: The connecting rod of the British boring head handle is very smooth, professional and practical appearance design, easy to use..
HIGH STABILITY: MT2 bracket is stable, accurate and high stability, very stable during work, and reliable tools..

Check Stock

Amana Tool 203351 Carbide Tipped Hinge Boring Drill Bit 35mm Dia x 57mm Long x 10mm Right Hand

HINGE BORING BIT – The Amana Tool Carbide Tipped Hinge Boring Bit allows you to bore a recess into your workpiece for cup hinges to be installed..
DESIGNED FOR – Boring machine bit (10mm shank) and boring drill bit presses (3/8" shank)..
DRILL CLEAN HOLES – Use the boring drill bits for wood and boring drill bits for metalworking, they provide clean and accurate hole cutting every time..
PERFECT SIZE – The hinge drill bit features sharp, fine blades for perfect drilling each time. (D) diameter: Boring bit 35 mm. Overall length (L): 57mm. Rotation: right hand..
INDUSTRIAL-QUALITY TOOLS – Amana Tool is a worldwide leading tool provider with USA-based corporate headquarters and warehouse, specializing in industrial-quality cutting tools..

Check Stock