Reviewshard Carbide Boring Bar

OSCARBIDE 1/2 Round Shank 4 Pieces/Set Boring Bar Set,90 Degree with Indexable Carbide Inserts TCMT21.51 TCMT110204

  • OSCARBIDE Boring Bar Set ,1-1/4”to 2-1/2”Boring Depth ,7/16” to 1/2”Min Bore ,1-3/4” to 4” Overall length,Bar holders are made of high quality steel with coated, inserts with Tin-coated are made of carbide,for moistureproof, rust-proof,for long time use.
  • Allow the operator to set positve or negative rake,chip breaker eliminates long stringer chips.
  • Carbide Inserts can be indexed, when it is dull use another sided,It is not necessary to remove tool from chuck or tool post.
  • Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • Replacement insert for this kit ,please search the Asin of this item: B07Q2HNGVF to buy it.
Check Stock

ASZLBYM S06K/S07K/S08K/S10K/S12M-SCLCR06 Lathe Indexable Internal Boring Bar Set Lathe Turning Tools Holder Set with CCMT21.51/CCMT060204 Carbide Indexable Boring Turning Inserts + 5pcs T8 Wrench

  • ♥PACKAGE INCLUDES : 5pcs lathe turning tools (S12M-SCLCR06 + S10K-SCLCR06 + S08K-SCLCR06 + S07K-SCLCR06 + S06K-SCLCR06 )+ 5PCS CCMT21.51( = ISO CCMT060204 ) carbide inserts + 5PCS T8 wrench , Comes with individual package, packed in Plastic box with Size mark on the box..
  • ♥5PCS BORING BAR : The material of the boring bar is 40Cr steel, Widely Use, Tightly impacted bolt, simple structure, often used for small hole machining..
  • ♥Lead cutting angle: 95 Degree, cutting direction: right hand, turning insert: CCMT21.51( = ISO CCMT060204 ), clear mark on the wrench, easy to identify bar holder..
  • ♥ 5PCS CCMT21.51 INDEXABLE INSERTS : inserts are made of carbide and the coating material is Multilayer ,the Inserts can be used for finishing or semi-finishing stainless steel and cast iron..
  • ♥ADVANTAGE : the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability .If you need more CCMT21.51/CCMT060204,you can search for ASIN: B09495PCR6.
Check Stock

Accusize Industrial Tools 1'' x 12'' Oal Right Hand S-Mwln Heavy-Duty Boring Bars with Wnmg43 Insert(Oxide Body), 0028-1970

  • Profiling bar for semi-finishing and finishing operations.
  • Boring from light roughing to finishing in small bores.
  • Using 80 degree carbide WNMG inserts negative 5 degree end and side cutting angle.
Check Stock

Auliuakz Boring Bar Set,9pcs HSS Material 1/2 inches Round Shank Boring Bar Set Machine Tool Accessories

  • Boring Bar Set:Made of high quality HSS material, high hardness, wear resistance and heat resistance..
  • Boring Bar Set:9 kinds of boring bar of different lengths to meet your different needs..
  • Boring Bar Set:Boring bar can be used on boring machine, lathe or milling machine..
  • Boring Bar Set:Excellent workmanship to ensure high accuracy..
  • Boring Bar Set:The handle of boring bar is thicker, more durable..
Check Stock

YG-1 P15202 Spade Drill Straight Shank Holder, Straight Flute, 0.318\ Shank Diameter, 31/32\-1-3/8\ Drill Insert Range

  • ☞This product is the main accessory of coordinate boring machine, horizontal boring machine, ordinary boring and milling machine, boring and milling CNC machine tools. It can be used for boring, boring outer circle, boring end face, boring stepped hole, boring inner hole end face, cutting inner hole and ring groove on outer circle, etc..
  • ☞Precise control and free adjustment: The scale of the dial is clear, and the circle is divided into 100 equal parts. The movement of each scale is 0.005mm, the diameter is 0.01mm, and the operation is simple..
  • ☞Select material with high hardness. Using 40CrMo material, it has strong rigidity, special surface treatment, high hardness, good seismic performance, suitable for high speed, and guarantees the density of hole processing..
  • ☞The boring range of the complete set of boring tools: 10-150mm, and the diameter of the boring tool bar is 50mm. Precision fine-tuning: 0.01mm (one revolution of 0.02mm), adjustable stroke 20mm. The boring bar easily and directly enters the boring head hole..
  • ☞The refined boring bar is made of alloy steel, which has strength and toughness, good hardenability, and no obvious temper brittleness. After quenching and tempering, it has obvious impact resistance. The taper design of the b....
Check Stock

MAXTOOL 2PCs 16NR12ACME Internal American Acme Indexable Threading Inserts 3/8\ I.C. 12 TPI Carbide TIALN-Coat; 16NR12ACME-T02

  • ♥Package includes ：11pcs 16IR A60 inserts, 1pc SNR0013M16 holder, 1pc wrench T15.
  • ♥Turning holder : tool holder is black oxidized smooth surface and tool hardness (HRC 48 degrees up and down) and precision are up to the first grade..
  • ♥16IR inserts pitch : AG60 60°, machining pitch range: 0.5mm~3.0mm. Inserts are made of carbide and the coating material is TiN ,it can be used for finishing or semi finishing steel ,the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability ..
  • ♥Holder Cutting direction: Right, Shank Diameter :1/2" inch ≈ 13mm, Over Length: 6" inch ≈ 150mm.
  • ♥Package: The carbide inserts and turning boring bar are packed in plastic containers, safe and easy to store ..
Check Stock

Accusize Industrial Tools Sclcr 4 Pc Indexable Boring Bar Set with 14 Carbide Cvd Coating Ccmt32.51 Inserts 1/2 5/8 3/4 1 P252-S416

  • SCLCR 4 Pc Indexable Boring Bar Set with 14 CCMT32.51 Inserts, 1/2, 5/8, 3/4, & 1".
  • Extreme Gloss Finish. Negative 5Degree End side cutting angle.
  • Utilizes 80Degree Diamond CCMT inserts. Bar hardness approx. 45HRC.
  • The insert is securely held with a torx screw to reduce tool slipping.
  • 1 each of 1/2'', 5/8", 3/4'' and 1" and CCMT 32.51 Carbide Black/Yellow Inserts.
Check Stock

NEW 9 pcs 1/2

  • 9 Piece boring bar set features C-6 carbide for use in harder materials but also works great in aluminum and other soft metals All shanks are held to 0.0000-0.0005" from the nominal diameter and made of special heat treated alloy steel. Shank Diameter- 1/2".
  • Contains: (3) pcs. 5/16" minimum bore (1 ea. 3/4" bore depth x 2-1/4" overall, 1 ea. 1-1/8" x 2-5/8", & 1 ea. 1-1/2" x 3").
  • Contains: (3) pcs. 7/16" minimum bore (1 ea. 1-1/8" bore depth x 2-5/8" overall, 1 ea. 1-11/16" x 3-3/16", & 1 ea. 2-1/4" x 3-3/4"), (3) pcs. 9/16" minimum bore (1 ea. 1-1/2" bore depth x 3" overall, 1 ea. 2-1/4" x 3-3/4", & 1 ea. 3" x 4-1/2").
Check Stock

OSCARBIDE 3/4 Shank 8 Pieces/Set Indexable Boring Bars,90 Degree Round Shank Boring Bars with Indexable Carbide Inserts 4 Pieces TCMT21.51 & 4 Pieces TCMT221

  • OSCARBIDE Boring Bar Set ,Bar holders are made of high quality steel with coated, inserts with Tin-coated are made of carbide,for moistureproof, rust-proof,for long time use.
  • Round shanks allow the operator to set positve or negative rake,chip breaker eliminates long stringer chips.
  • Carbide Inserts can be indexed, when it is dull use another sided,It is not necessary to remove tool from chuck or tool post.
  • Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine.
  • Replacement insert for this kit ,please search the Asin of item: B07Q2HNGVF & B07R6M1F3H.
Check Stock

findmall 8 Pcs Indexable Boring Bars Set,3/4 Shank,90 Degree Round Shank Boring Bars with Indexable Carbide Inserts 4 Pcs TCMT21.51 & 4 Pcs TCMT221,with Alumium Carrying Case

  • Product - Boring Bar Set ,Bar holders are made of high quality steel with coated, inserts with Tin-coated are made of carbide,for moistureproof, rust-proof,for long time use..
  • Parameter - Positive Rake 90Degree Lead, Uses 0.050 key, C6 grade: carbide for steel and alloy steel..
  • Function - Round shanks allow the operator to set positve or negative rake,chip breaker eliminates long stringer chips..
  • Feature - Chip breaker eliminates long stringer chips, A new cutting edge may be presented by simply, indexing the insert..
  • Application - Used for Turning internal hole, reaming, copying,etc.,used for semi-finishing on the existing hole cutter,fit boring machine, lathe machine..
Check Stock

RIDGID 72327 418 Oiler Gun, All-Weather Pipe Threading Oiler Gun with Simple 2-Finger Trigger Design, heavy-duty 1-Gallon Capacity Reservoir and Handy 54-Foot Hose,Silver,Small

  • 1. Material: Steel(Turning Holder)+Carbide(Carbide inserts).
  • Color: Black(Boring Bar)+Golden (Threading Insert).
  • 2. Direction: Right Shank Dia: 13mm=0.51"=1/2".
  • 3. Package: 1pc SNR0013M16+1pc SER1616H16 +5pcs 16ER AG60+5pcs 16IR AG60+2pcs wrenchs.
  • 4. Black oxided smooth finish on each turning tool holder style and shank size. Blades exquisite workmanship, high strength, high toughness, stable and durable..
  • 5. If you need more 16ER AG60 ,please search 【ASIN：B07RB5BKG7】,16IR AG60【ASIN：B07S1WSNJ6】.
Check Stock