Reviewsodroid Gpio

GPIO Status LED Terminal Block Breakout Board for Raspberry Pi A+ 3A+ B+ 2B 3B 3B+ 4B

GPIO status LED and power 5V / 3.3V indication..
GPIO output or input level high LED on, output or input level low LED off. 5V blue, 3.3V red, GPIOs green. The position of the LED is in a one-to-one correspondence with the position of the Raspberry Pi 2x20pin connector, and the logic level of the GPIO can be observed very quickly and intuitively. The driving current of each LED is only 0.1mA, so you don't have to worry about it affecting the read and write status of GPIO..
Support for Raspberry Pi A+, 3A+, B+, 2B, 3B, 3B+, 4B.
Terminal block pitch 3.5mm, wire size range 26AWG to 16AWG, strip length 5mm, screw M2 steel, pin header and cage copper. 2 x 20 pins expansion pin header, height 8mm..
Packing list: 1x terminal block breakout module, 4x M2.5x16mm nylon standoffs, 4x M2.5x6mm nylon standoffs, 4x M2.5 nylon nuts(NOTE: the item not include Raspberry Pi module).

Raspberry Pi Pico GPIO Expansion Board is used to break out all the pins and power of the Raspberry Pi Pico development board via male or female headers.
Pico GPIO Expansion Board allows the user to connect it to other components with the help of a jumper wire.
It has been designed to enhance the learning experience for the user.
GPIO Expansion Board is specifically made to work with the Raspberry Pi Pico Board.
Compatible with all the variants of Sensors/Modules.

Raspberry Pi Pico is Raspberry Pi's first microcontroller board, designed especially for physical computing.
It can be easily reprogrammed over USB from a Raspberry Pi or other computer using the C/C++ SDK or the official MicroPython port.
Raspberry Pi Pico GPIO Expansion Board is used to break outall the pins and power of the Raspberry Pi Pico development board via male or female headers.
Raspberry Pi Pico GPIO Expansion Board allows the user to connect it to other components with the help of a jumper wire.
Raspberry Pi GPIO Expansion Board is specially made to work with the Raspberry Pi Pico Board.

Installation instructions video: Please get the link from the product description below. PLZ NOTE: ★This case is not compatible with 3.5 Inch HDMI TFT LCD Display, It is designed to RPI 3.5 Inch GPIO Display, ★The 3.5 inch screen is not included!!!.
Dual-use: You can use it only on the Raspberry Pi motherboard, or use it on the Raspberry Pi motherboard and Raspberry Pi 3.5inch display,Then decide whether to cover the its cover. (Note: The Raspberry Pi motherboard and Raspberry Pi 3.5inch display are not included!!!).
Can install mini cooling fan: The case when used without the display screen, you can install mini cooling fan, Snap-in installation, the cooling fan was included in packaging..
With GPIO open position: There is a GPIO open position on this case cover,when you use it only with Raspberry Pi motherboard, it can easy to pull up and insert the GPIO pins, don't need to open the cover. This case is easy to install and has good ventilation..
With cable guide hole: It reserved cable guide hole for the camera, more convenient to use with camera.

85mm*56mm, Credit-card-sized High Performance Board.
4*USB HOST, 1*HDMI Out, 1*Micro USB, 1*UART, 1*GPIO interface, WiFi and 100M LAN interface,Support Micro SD card.
Rockchip RK3128 with Quad-core Cortex-A7 up to 1.2GHz.
40 Pin header enables hardware re-use by maintaining compatible alternate pin functions like I2S, I2C, PWM, UART, and GPIO. Form-factor compatible with Raspberry Pi 3 for easy migration..
Form Factor & GPIO Compatibility with Raspberry Pi for Maximum Re-usability.

Compatible with Raspberry Pi Zero/Zero 2 and Raspberry Pi Zero W/Zero W 2 (Raspberry Pi Zero Board is Not Included).
Case with Power Supply, refer to ASIN B09Q5CHCGX.
The heatsink is for better heat dissipation and GPIO header makes it easy to connect the GPIO ports..
Acrylic case with 2 covers and screws to install..
Access to all ports of Raspberry Pi Zero Board..
Package includes a case, heatsink, switch cable, OTG cable, HDMI adapter, GPIO header, and a screwdriver..

✓ The Latest Version 9 Layers case for Raspberry Pi 3 model B+ / Raspberry pi 3 /pi 3 model b / pi 2 / pi 2 b (Not include Pi Board).
✓ Raspberry Pi Case has the layout design for the Raspberry pi 3 model b+ and will perfectly protect your pi components.
✓ Easy to access all GPIO ports - Raspberry pi case with cutout to allow Pi's GPIO, HDMI, USB, SD, Power Supply and Other GPIO Ports access.
✓ Made of Acrylic, the raspberry pi 3b case Won’t Block your raspberry pi's Wifi / Bluetooth Signal.
✓5V 2.5A power supply with 59 Inch power cable is durable, on/off switch would cause less wear and tear on your raspberry pi's power port. Package Include: Raspberry Pi 3 B+ Case, Fan, 3 Pcs Heatsinks, 2.5A Power Supply.

Raspberry Pi Pico Evaluation Kit inlclude Raspberry Pi Pico with pre-soldered header ,1.14inch LCD Display Module,10-DOF IMU Sensor Module,Dual GPIO Expander ,830 Quality Breadboard etc.
Raspberry Pi Pico Board,a tiny, fast, and versatile microcontroller board,Built Using RP2040 Microcontroller Chip Designed By Raspberry Pi.
1.14" LCD Display Module for Pico ,Embedded ST7789 Driver, Using SPI Bus.
10-DOF IMU Sensor Module,an IMU sensor expansion module specialized for Raspberry Pi Pico. It incorporates sensors including gyroscope, accelerometer, magnetometer, baroceptor, and uses I2C bus for communication..
Dual GPIO Expander for Pico,Two Sets Of Standard Raspberry Pi Pico GPIO Male Headers.

Fits Raspberry Pi Zero Version 1.3 and Zero Wireless (not included). Compact design with access to camera port..
High quality materials with custom hardware. Heatsink Included!.
Includes Heatsink will NOT fit Zero with GPIO Pins see GPIO Case.